CS Paper Radar

PENDA: An Efficient Processing Element via Norm-of-Difference for Deep Learning Accelerators

Kai-Chieh Hsu, Tian-Sheuan Chang

cs.AR ·submitted 2026-09-08 08:32 UTC · v1

Abstract

Inner product computation dominates the computational cost of deep learning models; thus, accelerating this primitive is key to improving hardware efficiency. However, most existing techniques rely on approximations, which can degrade model accuracy. To preserve exactness while optimizing hardware, this paper presents PENDA (processing element via norm-of-difference architecture), which leverages the law of cosines to recast multiplications as squared-difference operations. Replacing multiply-accumulate units with the proposed norm-of-difference units yields 11~36%, 5~48%, and 11~19% reductions in area, energy, and clock period, respectively, for the PE array of a deep learning accelerator.

Comment
submitted to IEEE TCAS-AI

Closest papers

Nearest neighbours by meaning across the whole index.

Efficient Reconfigurable Architectures for Deep Learning

cs.AR ·2026-10-31 ·Endri Taka
hot direction similarity 0.65
Abstract · Ph.D. dissertation, Department of Electrical and Computer Engineering, The University of Texas at Austin, 2026

The growing computational demands of deep learning (DL) have driven AI-optimized reconfigurable devices, such as the AMD Versal AI Engines (AIEs), the Intel Stratix 10 NX Tensor Blocks (TBs), and the AMD Ryzen AI NPUs. Their heterogeneous resources and novel dataflow models make efficient exploitation nontrivial, and FPGAs lack native support for structured sparsity. This dissertation optimizes dense general matrix multiplication (GEMM), the dominant DL kernel, on these devices, proposes FPGA architectural enhancements for structured sparsity, and extends the techniques to AMD Ryzen AI NPUs. First, MaxEVA optimizes GEMM on Versal AIEs, achieving up to 2.19$\times$ higher throughput and 20.4% higher energy efficiency than the state of the art. It is then extended to arbitrary matrix sizes, and a systematic framework is proposed for the Stratix 10 NX TBs. Both frameworks reach state-of-the-art int8 throughput of up to 77 and 68 TOPS, and energy efficiency of up to 0.94 and 1.35 TOPS/W, on Versal and Stratix, respectively. Next, Systolic Sparse Tensor slices (SSTs) are proposed as in-fabric hard blocks supporting dense, 2:4, 1:4, and a new 1:3 sparsity level. SST-based GEMM accelerators achieve up to 5$\times$ higher frequency and 10.9$\times$ lower area than conventional FPGA logic, and on sparse ViT and CNN models SSTs deliver up to 3.52$\times$ speedup over dense in-fabric acceleration with up to 13.3% area increase. Finally, a common systematic methodology is proposed to optimize GEMM across the XDNA and XDNA2 AMD NPUs, reaching state-of-the-art performance of up to 6.76 and 38.05 TOPS (int8) and 3.14 and 14.71 TOPS (bf16), respectively.

0.24

Precision-Aware Variable Bit Processing Elements for Hardware-Efficient Systolic Array Designs

cs.AR cs.ETcs.LGeess.IV ·2026-08-23 ·Dantu Nandini Devi, Madhav Rao
published similarity 0.65
Abstract

Systolic arrays (SAs) have emerged as prominent hardware accelerators for matrix operations in deep learning, while floating point number formats enable precision control across computational domains. This research investigates approximate computing techniques for floating point (FP) multipliers in Weight Stationary Systolic Arrays, focusing on IEEE 754 (FP32), TensorFloat-32 (TF32), and Brain Floating point (BF16) formats. By integrating partial product matrix (PPM) column truncation with positive and negative compressors in the FP multiplier architecture, we optimize the trade-off between computational efficiency and accuracy. NSGA-II optimization algorithm was employed to explore the vast design space for evolving FP multiplier designs, towards achieving substantial hardware improvements while maintaining acceptable output quality. Substantial hardware benefits were observed in the FP multiplier designs across various applications, while preserving output quality. The FP approximated Processing Elements designed in the SA was found to offer comparable CNN accuracy for models trained on MNIST, F-MNIST, and CIFAR-10 dataset. The FP approximated SA designs that fall in the top 10 CNN performance offered substantial hardware gains in the range of 66% to 92% footprint savings, 60% to 93% of power benefits with 21% to 54% improvement in the delay when compared with the corresponding exact implementations mentioned in the literature for running the model trained on CIFAR-10 dataset. The TF32 and BF16 approximated SA designs also achieved substantial gains while maintaining comparable CNN accuracy. Our findings confirm that targeted approximation in FP multiplier design significantly improves the efficiency of hardware accelerators for error-tolerant applications, establishing an effective approach to hardware resource optimization in contemporary computing architectures.

0.27

Bit-Sparsity Aware Acceleration with Compact CSD Code on Generic Matrix Multiplication

cs.AR ·2026-11-11 ·Zixuan Zhu, Xiaolong Zhou, Chundong Wang, Li Tian, Zunkai Huang +1 more
top venuehighly cited similarity 0.64
Abstract · Accepted for publication in IEEE Transactions on Computers (TC)

The ever-increasing demand for matrix multiplication in artificial intelligence (AI) and generic computing emphasizes the necessity of efficient computing power accommodating both floating-point (FP) and quantized integer (QINT). While state-of-the-art bit-sparsity-aware acceleration techniques have demonstrated impressive performance and efficiency in neural networks through software-driven methods such as pruning and quantization, these approaches are not always feasible in typical generic computing scenarios. In this paper, we propose Bit-Cigma, a hardware-centric architecture that leverages bit-sparsity to accelerate generic matrix multiplication. Bit-Cigma features (1) CCSD encoding, an optimized on-chip sparsification technique based on canonical signed digit (CSD) representation; (2) segmented dot product, a multi-stage exponent matching technique for long FP vectors; and (3) the versatility to efficiently process both FP and QINT data types. CCSD encoding halves the cost of CSD encoding while achieving optimal bit-sparsity, and segmented dot product improves both accuracy and throughput. Bit-Cigma cores are implemented using 65 nm technology at 1 GHz, demonstrating substantial gains in performance and efficiency for both FP and QINT configurations. Compared to state-of-the-art Bitlet, Bit-Cigma achieves 3.2\texttimes{} performance, 6.1\texttimes{} area efficiency, and 15.3\texttimes{} energy efficiency when processing FP32 data while ensuring zero computing error.

0.66

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.64
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28

ASDL: A Fast Vector Approximation Algorithm for Multiplierless Designs of Convolutional Neural Networks

eess.SP ·2026-11-16 ·Guillaume H. Tong, Luiz F. da S. Coelho, Lounis Zerioul, Didier Le Ruyet
similarity 0.63
Abstract

Matrix multiplications are one of the main computational bottlenecks in neural networks. The calculation reduces to numerous sums of partial products, which scale with the total number of Signed Power of Two (SPT) values in the multiplier matrix. Minimizing the SPT count can significantly reduce the computational burden. In this context, we present a Sum Of (signed) Powers Of Two (SOPOT) vector approximation algorithm that limits SPT counts, namely the Accelerated Signed Digit Loading (ASDL) algorithm. This approximation algorithm converts ResNet50 10 times faster than its predecessor MPGBP, while being more precise. We apply this method to the pre-trained coefficients of different convolutional neural networks, achieving 80.41\% ImageNet accuracy down from 81.3\%, at an average of only 1.5 active bits per coefficient. This is done without any retraining or calibration, which are typically required for the most aggressive quantization methods. Our approach offers a promising direction for neural network inference with higher energy efficiency and fewer hardware requirements: we anticipate up to 10 times improvement over bfloat16 inference.

0.24

A Cross-Domain Matrix Engine for Signal Processing and Deep Neural Net Inference

cs.AR cs.AI ·2026-11-02 ·Mehdi Safarpour
similarity 0.62
Abstract

Matrix multiplication dominates both PHY signal processing and Deep Neural Network (DNN) inference, yet these domains place opposing demands on the matrix engine. Signal processing requires low-latency execution of relatively small matrix operations, whereas DNN inference, particularly at large batch sizes, prioritizes high throughput and energy efficiency for large matrix multiplications. While offering efficient memory access profile, a Systolic Array (SA) adds fill and drain delays per matrix. Those can be amortized for large matrices but not for small matrices. Conversely, a tensor unit completes the kernel in few cycles but would require repeated reads of same operand tiles over large matrices. This makes SA too slow for signal processing and tensor too inefficient for AI. We show that this need not be a choice between systolic and tensor structuring of Multiply-Accumulate (MAC) units. We propose a single engine that operates primarily as a SA and, through low-cost reconfiguration, transforms into a tensor-style engine on a per-operation basis. MUXes create both the spatial reduction adder tree and temporal reduction accumulators from the existing MACs and registers within the systolic array. The proposed reconfigurable SA simulated using modified SCALESim simulator, verified on an Zynq 702 FPGA and synthesized using ASAP 7nm FinFET library. SCALE-Sim simulations shows up to 7.5x lower latency for small complex value PHY kernels. Even on DNN workloads, it achieves up to 1.65x speedups over vanilla SA execution with trivial increase of memory accesses, retaining the systolic array's memory access advantage. Synthesis results estimate reconfigurable fabric costs only 8% power and 13.6% area overheads.

0.19

Uni-SFU: Algorithm-HW Co-Design for Universal SFUs via Mixed-Degree Piecewise Approximation

cs.AR ·2026-08-12 ·Miao Sun, Yucheng Huang, Mingcong Cao, Jaehyun Park, Partha Pratim Pande +1 more
similarity 0.62
Abstract · 14 pages

Nonlinear activation functions are essential to modern deep neural networks (DNNs), but their hardware evaluation places significant pressure on the special-function units (SFUs) of GPUs and custom accelerators. Therefore, piecewise polynomial approximations are commonly used within allowed error bounds to improve computational efficiency. However, existing techniques often approximate each activation function in isolation using fixed-degree polynomials and uniform segments, leading to hardware redundancy and sub-optimal precision. To address these limitations, we present Uni-SFU, an algorithm-hardware co-design framework that jointly optimizes approximation accuracy and silicon area for a diverse set of activation functions. Uni-SFU leverages a joint search across all target functions to assign mixed-degree polynomials to nonuniform segments, guided by an RTL-derived area cost model. This approach identifies a unified hardware configuration to implement the target activation functions under given accuracy constraints. Validated across over 700 neural network variants and three Natural Language Processing (NLP) models, Uni-SFU achieves a superior Mean Squared Error (MSE) below 8.22x10^-8, limiting top-1 accuracy degradation to within 1.02% compared to floating-point baselines. The proposed design occupies only 6,800 um2 in GF 22nm CMOS technology, achieving a superior trade-off between silicon area and system-level accuracy compared to SOTA counterparts.

0.10

Enabling Memory-efficient Im2win Convolution with Multi-precision Support on GPU CUDA and Tensor Cores

cs.DC cs.CV ·2026-08-21 ·Xiang Fu, Jixiang Ma, Xinpeng Zhang, Peng Zhao, Shuai Lu +1 more
published similarity 0.62
Abstract · Accepted at the 2026 International Joint Conference on Neural Networks (IJCNN 2026). To appear in IEEE Xplore

Convolution is a principal computational bottleneck in deep neural networks, and its efficiency depends on tight integration between algorithms and GPU hardware. Existing GPU convolution methods suffer from large memory overhead, poor cache utilization, limited effectiveness across kernel sizes, or numerical instability. This work extends the im2win paradigm -- a universal, memory-efficient convolution method with contiguous memory access for all kernel sizes -- to run efficiently in full precision on CUDA cores and half precision on tensor cores. By introducing new kernel designs and optimizations such as zig-zag memory access and asynchronous data movement, im2win efficiently exploits hardware-accelerated half-precision matrix multiply-accumulate operations. Across twelve CNN benchmarks, im2win achieves up to 2.8x higher TFLOPS than its CUDA core implementation, 1.4x higher than cuDNN, and 6.4x higher than GEMM-based convolution with cuBLAS, while using as little as 53% and 35% of their memory, respectively. These results establish im2win as a unified, high-performance convolution framework for modern GPU architectures.

0.50