CS Paper Radar

Real-time Puncture Detection and Recovery for Pneumatic Soft Actuators

Tejonidhi R. Deshpande, Tingyu Cheng, Josiah Hester

cs.RO ·submitted 2026-09-08 14:31 UTC · v1
top venue

Abstract

Soft robots offer safe and adaptive interaction with humans and unstructured environments through their inherent ability to deform and comply. Pneumatic actuators are one way to build soft robots. They are typically made from soft silicone materials and are especially effective for driving such systems, enabling smooth and adaptable motion. However, their compliant nature also makes them vulnerable to mechanical failures like punctures and tears, limiting practical deployment. To address this, we propose a puncture detection system for soft actuators using motion data from a single inertial measurement unit. Extracted features are used to train anomaly detectors for puncture detection and non-linear models to estimate severity. We also introduce a multi-chamber pneumatic soft bending actuator capable of diverse configurations via selective chamber inflation. Our algorithm identifies the punctured chamber and provides a severity score using a chamber perturbation scheme. Anomaly detectors are trained on normal operation data and detect damage through reconstruction errors, while severity is estimated by a separate model trained under slightly modified conditions. Finally, we demonstrate a failure recovery strategy to maintain actuation force post-failure. This approach enhances the reliability and safety of soft robotic systems through real-time, data-driven damage detection.

Comment
Accepted at IEEE ICRA 2026

Closest papers

Nearest neighbours by meaning across the whole index.

An End-to-End Framework for Modelling Pneumatic Soft Robots Based on Differentiable Finite Element Methods

cs.RO eess.SY ·2026-10-03 ·Shaohong Zhong, Yao Yao, Perla Maiolino, Ingmar Posner
top venue similarity 0.58
Abstract · Published in IEEE Robotics and Automation Letters (RA-L)

Soft robots present significant modelling challenges due to their non-linearity, complex dynamics and potentially intricate geometries. These difficulties in accurate system identification and dynamics modelling limit their applications in precise robotics tasks. Prior modelling approaches typically suffer from trade-offs in accuracy, computational efficiency, or speed. The differentiable finite element method (FEM) offers a promising balance between these desiderata for soft robot modelling, and enables the use of gradients for efficient calibration and trajectory optimisation. In this paper, we propose an end-to-end differentiable FEM-based framework designed to streamline modelling and system identification for pneumatic soft robots, enabling the generation of reliable models for downstream tasks. The framework automates the conversion of computer-aided designs into voxelised tetrahedral viscoelastic FEM meshes that accurately represent the robot's geometry and actuation mechanism. By integrating easily acquired point cloud data with differentiable FEM, the framework achieves precise identification of material and dynamic actuation parameters using a minimal experimental setup. Additionally, the differentiable nature of the model facilitates trajectory optimisation by leveraging gradients from robot dynamics and contact interactions. We validate the framework by modelling a complex bellow-shaped pneumatic soft robot and demonstrate its efficacy in real-world motion planning tasks. Experimental results indicate high modelling accuracy, with a maximum positional error of less than 3 mm, and successful application in tasks such as path following and grasping.

0.73

Task-space model-based control of pneumatic soft actuators

cs.RO ·2026-08-27 ·Nithin S. Kumar, Joshua Gaston, D. Caleb Rucker, Eric J. Barth
top venue similarity 0.58
Abstract · 11 pages, 14 figures

Soft actuators enable dexterous and compliant interaction, but closed-loop task-space control remains challenging due to strong nonlinearities, distributed deformation, and uncertainty in their dynamics. This paper presents a real-time dynamic-model-based task-space feedback and estimation framework based on a non-minimal coordinate discrete elastic rod model formulated in absolute coordinates with holonomic constraints. The resulting structure preserves distributed mechanics while maintaining computational efficiency through sparse system matrices, enabling real-time control with up to 10 discretized rods. A quasi-static feedforward inverse model is combined with a task-space PI controller and a dynamic observer that fuses measurement residuals as virtual forces, enabling full-state estimation from sparse sensing. The approach is experimentally validated on three planar pneumatic soft actuators with varying geometries. Across five tasks, including drawing the digits 0-9 across the workspace (3-18 mm/s tip speed), tracking periodic motion (up to 37 cm/s), cross-platform generalization, reduced sensing conditions, and real-time user-defined references, our method achieves 1.5-2.3 mm root mean square error (RMSE) for precision motions and 5.5-12.4 mm RMSE at 1-2 Hz. Results demonstrate that structured, non-minimal dynamic models can enable real-time, high-precision, moderate-bandwidth task-space control of planar soft pneumatic actuators in free space.

0.27

PneuTac: Tactile Manipulation with Soft Pneumatic Robots via Unified MPM-Gaussian Splatting Simulation

cs.RO ·2026-09-29 ·Shaohong Zhong, Marco Pontin, Joe Watson, Perla Maiolino, Ingmar Posner
similarity 0.57
Abstract

Soft robots and tactile sensors have demonstrated great potential in delicate manipulation tasks. Soft pneumatic robots enable safe contact through compliance, and vision-based tactile sensors offer high-resolution touch perception. However, learning tactile manipulation with compliant robots has been challenging, bottlenecked by the lack of efficient simulation. Existing simulators typically model them in isolation, and exhibit large calibration gaps that are difficult to overcome efficiently. We present PneuTac, a unified framework for tactile-feedback manipulation with soft pneumatic robots. We leverage the material point method (MPM) for modelling the dynamics of the soft robot and the deformable tactile membrane, and 3D Gaussian splatting (3DGS) for rendering. Real-to-sim modelling is done with a simple vision-based method, to then train action and perception networks for efficient simulation with surrogate models. We use the framework to drive a tactile-guided pipeline to collect demonstrations in simulation. Through experiments on a custom-designed pneumatic soft finger with a tactile sensing tip, together with additional cross-device evaluations, we show that PneuTac is capable of accurately modelling soft robots with tactile sensors, and that policies trained with simulation-augmented demonstrations outperform baselines trained on the same real data on three real-world contact-rich compliant manipulation tasks, making it a practical framework for tactile manipulation on compliant hardware.

0.15

Towards end-to-end co-design for one-shot printable task-specific soft robots

cs.RO ·2026-11-02 ·James Wood, André Farinha, Will Browne, Josh Pinskier, Krishna Manaswi Digumarti
similarity 0.57
Abstract

Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an experimentally validated material model and an empirically derived surrogate model of a 3D-printed inflatable actuator. We demonstrate gradient-based optimisation soft robotic arms for prescribed tip trajectories. Optimised designs are transferred directly from simulation to one-shot monolithic FDM fabrication, with integrated actuators and no post-assembly. Physical experiments demonstrate that the resulting arms reproduce the behaviour predicted in simulation. This framework provides a path from task-level objectives to physically realisable soft robots while retaining substantial freedom over both morphology and actuation.

0.14

A Monolithic Force-Proprioception Soft Acutuator Enabled by Single-Material 3D printing

cs.RO ·2026-09-21 ·Nan Huang, Lele Liu, Junfeng Lu, Yipan Zhu, Jiansheng Dai +1 more
similarity 0.56
Abstract

Pneumatic proprioceptive actuators integrate actuation and sensing for soft robots that attract interest due to functional potential. Existing approaches often suffer from assembly errors or stress concentrations caused by heterogeneous materials. In this work, we propose the Monolithic Force-Proprioception Soft (MFPS) design and fabrication method that integrates an Asymmetric Origami Bending (AOB) chamber and a Force-Proprioception Soft (FPS) sensor with single material through one-step Fused Deposition Modeling (FDM) fabrication. Based on the resistance response to strain of conductive thermoplastic polyurethane (TPU), we design and analyze the structure of the FPS sensor, and conduct parametric analysis on the sensing characteristics. The FDM fabrication parameters of the MFPS actuator are analyzed, followed by actuator fabrication and characterization of the actuation and proprioception performance. Experimental results show that the MFPS actuator achieves a bending angle of 40°, an output force of 12.5 N, and a resistance change of 26.9% as the applied external force increased from 0 to 45 N. A two-finger force-proprioception gripper is developed based on the MFPS actuator. The grasping and force-proprioception capabilities are experimentally validated, proving that the MFPS design method provides a new approach for the development of self-sensing actuators.

0.20

A Reconfigurable Fabric Based Pneumatic Actuator with Button Fastened Constraint Modules for Multi Mode Actuation

cs.RO ·2026-10-08 ·Kentaro Kimura, Hiroki Ishizuka, Yusuke Sakaue, Sei Ikeda, Osamu Oshiro
similarity 0.55
Abstract · IEEE Access in Revision

Soft pneumatic actuators are widely used in soft robotics. However, their actuation modes are typically fixed by internal chamber designs or reinforcements, making post fabrication reconfiguration difficult. This paper presents a reconfigurable fabric-based pneumatic actuator that enables rapid, tool free, and reusable switching among multiple actuation modes by attaching constraint fabric modules to a buttoned textile sleeve. By rearranging low-stretch constraint parts on a single actuator body, the proposed system realizes four actuation modes isotropic expansion, contraction, bending, and twisting without redesigning or disassembling the actuator.We further introduce an attachable capacitive fabric-based tactile sensor module that can be mounted at arbitrary locations on the actuator surface for task dependent contact sensing. Experiments demonstrated an elongation ratio of 1.2, a maximum bending angle of approximately 60 degrees, and a twisting angle of approximately 90 degrees at 24 kPa, while achieving blocking forces exceeding 10 N across all modes. The tactile sensor exhibited a monotonic, force-dependent increase in capacitance with low hysteresis (approximately 12%) and stable cyclic responses under preload. Finally, we constructed soft robotic arms composed of multiple actuators and demonstrated in situ motion reconfiguration for grasping by changing the attached constraint patterns. These results indicate that the proposed modular constraint and sensing framework improves the functional adaptability of fabric-based soft robots while preserving a simple, robust actuator structure.

0.23

PneuGen: Task-Driven Agentic Co-Design of Soft Pneumatic Robots

cs.RO ·2026-11-09 ·Shaohong Zhong, Marco Pontin, Perla Maiolino
similarity 0.55
Abstract

Task-driven design of soft robots requires the consideration of factors such as geometry, morphology, material properties, and actuation, resulting in a large and complex design space that is challenging to explore. Computational optimisation methods leverage signals from simulation to iteratively improve designs to achieve task objectives. However, these methods typically demand high computational load for both optimisation and simulation. We present PneuGen, an agentic co-design framework for soft robots that leverages Large Language Model (LLM) agents to search over the soft robot design space efficiently. A designer agent proposes design programs from a parametric component library, and a separate critic agent analyses simulation diagnostics and recommends targeted revisions. Fitted module response models provide reusable physical priors relating geometry and pressure to deformation. Design programs are automatically validated and converted into finite-element simulations, enabling iterative evaluation. Across grasping tasks on primitive shapes and challenging objects, as well as shape-matching tasks that require multi-directional planar and 3D deformation, the proposed framework significantly outperforms prior computational optimisation baselines. Ablation experiments also highlight the utility of the critic agent and the module response model in facilitating efficient design. We additionally demonstrate the agent-generated soft robot designs in real-world shape-matching and grasping tasks.

0.14

Observability-Informed Optimal Sensor Placement for Soft Robots

cs.RO ·2026-09-27 ·Samuel Smocot, James Richard Forbes, Audrey Sedal
published similarity 0.54
Abstract · Published in IEEE Robosoft 2026. 8 pages, 4 figures, 6 tables

This paper presents the application and experimental evaluation of a systematic method for optimal sensor placement in soft robots. Existing methods either lack generalizability across different soft robot morphologies or do not account for system dynamics. The applied method uses convex optimization to find the optimal sensor configuration that maximizes an observability Gramian-based metric. The framework is experimentally evaluated using position and strain measurements on a soft continuum arm. Kalman filter state estimates using optimal sensor placements yield lower reconstruction error than a baseline across all sinusoidal input trials, with improvements on the order of millimeters. This case study shows that linear control theory tools can guide optimal sensor placement in soft robots, suggesting an interpretable approach to sensor placement that may extend to other morphologies.

0.59