CS Paper Radar

Forward-Scatter Bistatic RCS of a PEC Sphere: A Mie-Theory Analysis

Khalid El-Darymli, Christoph H. Gierull

eess.SP ·submitted 2026-09-08 19:41 UTC · v1
publishedbenchmarktheory

Abstract

Forward-scatter radar (FSR) represents an extreme bistatic configuration in which the transmitter--target--receiver geometry approaches collinearity, yielding a bistatic angle near $180^\circ$. In this regime, diffraction-dominated scattering can produce bistatic radar cross sections (RCS) that substantially exceed their monostatic counterparts, a property that underpins FS and passive bistatic radar concepts. This paper presents a rigorous electromagnetic study of the bistatic RCS of a perfectly electrically conducting (PEC) sphere using exact Lorenz--Mie theory. The analysis addresses two practical objectives: (i) quantifying the sensitivity of FS enhancement to deviations from the ideal $180^\circ$ bistatic angle as a function of electrical size, and (ii) decomposing the FS response into the canonical Lorenz--Mie polarization channels $S_1$ and $S_2$, thereby establishing a polarization-resolved benchmark. The results, however, are governed by the dimensionless size parameter $ka$ and therefore generalize directly to other frequencies and bistatic configurations. By explicitly relating full-wave simulation results to Babinet-based FS scaling and optical-theorem interpretations in the high-frequency limit, the paper provides a physically transparent benchmark for FS and passive bistatic radar analysis.

Closest papers

Nearest neighbours by meaning across the whole index.

Sampling Reduction for Near-Field to Far-Field Transformation of Bistatic Radar Target Measurements

eess.SP ·2026-10-14 ·Getahun Kibret Tadesse, Thomas Dallmann
similarity 0.61
Abstract · Preprint; 5 pages, 7 figures

Accurate bistatic radar cross-section (RCS) characterization requires near-field measurements over multiple dimensions, which, under typical near-field sampling requirements, can lead to long measurement durations for electrically large radar targets. This paper presents a near-field-to-far-field transformation based on an equivalent surface-current reconstruction using a-priori information about the target to reduce the number of newly acquired near-field samples. It is assumed that the prior target and the target under test (TUT) differ by localized geometrical modifications. Their complex differential near field is reconstructed using Tikhonov-regularized least squares QR factorization (LSQR) method. The reconstructed differential far- field contribution is coherently combined with the prior far-field contribution to estimate the bi-static RCS of the TUT. The method is preliminarily evaluated using simulations of a complex target at 6 GHz. The results indicate that, for the investigated simulation case, prior information can be used to thin out the sampling grid by 90% while maintaining close agreement with the simulation baseline.

0.23

Fast Angular Sweep Monostatic Radar Cross Section Computation via Model Order Reduction

eess.SP physics.comp-ph ·2026-10-07 ·Noelia Naranjo, Valentin de la Rubia
code/data similarity 0.57
Abstract

The radar cross section (RCS) is a fundamental parameter in radar engineering, as it determines the detectability of a given target by a radar system. Increasing interest in very low observability (VLO) targets has arisen recently. As a result, especial effort is put in developing numerical tools to accurately predict the electromagnetic scattering from perfect electric conductor objects. Integral equation methods are commonly used in this task. However, full-wave computation of the monostatic RCS at a single angle can be rather time-consuming, nevermind computing the RCS in a specific angular interval with a fine sampling. In fact, this is what is needed in industrial applications. A reduced-order model for fast full-wave monostatic RCS evaluation is proposed to easily achieve fine details in the desired angular domain. An open source integral equation solver, taken into account as a black box, is used to get the electromagnetic scattering in non-penetrable objects at some specific incident angles. Several radar targets will show the possibilities and capabilities of these model order reduction approaches.

0.34

Electromagnetic Channel Model and Sensing Performance for ISAC: The Case of a Single Cylindrical Scatterer

eess.SP cs.IT ·2026-11-17 ·Gabriele Gradoni, Ahmed Elzanaty, Yadong Yang, Mohsen Khalily, Mahmoud Shahabadi +4 more
top venuetheory similarity 0.53
Abstract · 16 pages; published in IEEE Transactions on Wireless Communications

We propose an electromagnetic wireless channel model for accurate target localization in radar-like sensing scenarios. The model employs a self-consistent method grounded in wave scattering theory and imposing boundary conditions, providing the (impedance) channel transfer matrix for a propagation channel with a single target modeled as a cylindrical scatterer. The model is: 1) physics-based, as it includes electromagnetic interactions between objects; 2) unified, as it is valid in both near- and far-field regions. Within the canonical two-dimensional and 2.5-dimensional configurations with line-source and dipole-source excitations, respectively, the model supports dielectric cylinders with frequency-dependent permittivity. Localization accuracy is assessed via the Cramer-Rao lower bound for a dielectric cylinder with variable position, radius, and dielectric constant. Provisions for future extensions to extended targets are discussed in the context of 3GPP channel modeling.

0.46

Intrinsic Scatterer Representation for Forward Scattering Modeling of Complex Radar Targets

eess.SP ·2026-08-31 ·Ziyu Yue, Feng Xu
similarity 0.51
Abstract

Forward modeling of scattering centers of radar targets is critical for advanced information retrieval of Synthetic Aperture Radar (SAR) images. Existing forward modeling approaches rely on meshing the target and computing scattering via ray-tracing techniques, which not only incur high computational cost but also discard the semantic information of target geometry, thereby limiting the interpretability of SAR imagery. To address these issues, this paper proposes a novel forward scattering modeling framework that directly constructs stable, compact, and physically meaningful scatterers from target geometry. This formulation decouples target representation from specific observation configurations, enabling an intrinsic scatterer description across varying viewing angles. Specifically, an improved Random Sample Consensus (RANSAC) scheme is first developed to robustly extract planes, cylinders, and spheres from target point clouds, yielding single-bounce scatterers. Potential multiple-bounce scatterers are then automatically detected by analyzing inter-primitive relations, and further refined through geometric clipping and parameter alignment to produce unique scattering representations compatible with canonical scattering center models. Finally, radar responses and SAR images can be generated under arbitrary observation configurations based on the constructed scatterers. The proposed method is validated through extensive experiments, including comparisons with electromagnetic simulations and measured data. The results show that it can accurately characterize the scattering behaviors of complex targets, providing an efficient, interpretable, and reliable solution for SAR image modeling and understanding.

0.21

Bistatic UAV-Based 3D SAR Imaging Using Integrated Sensing and Communications Transceivers

eess.SP ·2026-11-09 ·Akanksha Sneh, Krishna Ayyagari, Vivaswan Nawani, Shobha Sundar Ram
similarity 0.48
Abstract

Integrated sensing and communication (ISAC) frameworks enable autonomous systems to jointly perform radar sensing and wireless communication using common spectral and hardware resources. Prior art on ISAC-enabled UAV for SAR focused on monostatic configurations for two-dimensional target imaging. In this work, we propose a bistatic UAV tomographic SAR framework in which the IEEE~802.11ad waveform, RF hardware, and spectral resources are jointly utilized for communication and radar sensing for three-dimensional (3D) localization of complex targets. Specifically, we demonstrate how communication packets transmitted from a master ISAC transceiver UAV to a passive receiver UAV are exploited for timing and frequency synchronization, motion compensation, and 3D localization of targets, without requiring auxiliary infrastructure on the passive receiver for these tasks. We evaluate the proposed framework for localizing automotive targets over elevated terrain, with Monte Carlo simulations modeling synchronization and platform motion errors. The results demonstrate improved localization accuracy compared with conventional InSAR-based localization. The interplay between radar and communication performances are further evaluated using diverse modulation schemes.

0.11

Analytical Characterization of Radial Resolution at Oblique Angles for Near-Field Communications

eess.SP ·2026-11-11 ·Viviana Centritto, Sotiris Droulias, Angeliki Alexiou
theory similarity 0.47
Abstract · 6 pages, 8 figures

Exploiting radial resolvability in near-field communications requires analytical expressions that directly map physical beam parameters to resolution-controllable focal regions. However, beam characterization at oblique angles produces complex algebraic expressions that mask these critical interactions. In this work, we introduce an electromagnetic-aware analytical model built upon a tight upper bound of the spatial power density. This approach yields compact, closed-form solutions for the peak intensity position and radial focal extent, enabling the design of contiguous multi-user focal regions with controlled radial resolution. Performance evaluations confirm that the framework closely tracks exact solutions while facilitating system dimensioning and inter-beam interference management across varying steering angles.

0.17

RIS-Assisted Radar-Communication Coexistence: Detection Analysis with Channel Uncertainties

eess.SP ·2026-08-24 ·Rawan Derbas, Shimaa Naser, Hamad Yahya, Sanjeev Gurugopinath, Paschalis C. Sofotasios +1 more
similarity 0.46
Abstract · Submitted for publication in IEEE journals

Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology for improving communication reliability in radar-communication coexistence (RCC) scenarios, particularly for communication users (CUs) located inside radar exclusion zones, where only the radar is permitted to operate and the two systems remain uncoordinated. In such settings, CUs may suffer from strong radar interference whose phase is random and difficult to track while also facing difficulty in obtaining accurate CSI from the base station. These challenges become even more critical in the presence of RIS phase errors, which limit the applicability of conventional coherent detection methods. Motivated by these practical limitations, this paper develops an RIS-assisted RCC framework for a CU operating in an uncoordinated RCC setting. Within this framework, we derive two practical maximum-likelihood (ML)-based detectors, both of which avoid tracking the radar interference phase: 1) a non-coherent detector that does not require instantaneous CSI and incorporates RIS phase uncertainty, and 2) a mismatched coherent detector that relies on imperfect CSI. For the non-coherent case, we derive an exact likelihood expression and a closed-form detector in the low to moderate SINR regime. For the imperfect CSI case, we derive the corresponding closed-form detector in the low-to-moderate SINR regime, and analyze performance through pairwise error probability (PEP), yielding a tractable approximation based on Gauss-Chebyshev quadrature. Numerical and analytical results show that the proposed non-coherent detector closely matches the optimal ML detector, validating its practical usefulness.

0.25

Electromagnetically Consistent Monostatic ISAC Beamforming: Mutual Coupling, Active Mismatch and Tx-Rx Leakage in Compact Dipole Arrays

eess.SP ·2026-11-05 ·Stylianos D. Asimonis, Christos Tselios, Dimitrios Tyrovolas, Ilias Politis, George K. Karagiannidis
similarity 0.46
Abstract · 6 pages, 9 figures, 2 tables. Submitted to IEEE ICC 2027

Beamforming for integrated sensing and communication (ISAC) is usually designed on ideal array manifolds with a norm constraint on the transmit signal. In a compact monostatic transceiver this hides three antenna effects: distorted embedded patterns, beam-dependent active mismatch at the power amplifiers, and transmit-to-receive leakage that raises the radar noise floor. We build a multiport scattering model of a shared-aperture dipole array directly from method-of-moments simulations and use it to formulate a Cramer-Rao bound minimizing ISAC beamformer with multiuser SINR constraints, per-port active reflection constraints and a leakage budget, solved as a semidefinite program with a one-dimensional budget search. Full-wave evaluation shows that coupling-unaware designs miss their SINR targets by up to 6.2 dB and drive amplifiers to an equivalent VSWR above 3.3 at small spacings. For spacings from 0.3 to 0.5 wavelengths, the proposed design meets all targets with an equivalent VSWR below 2 and lowers the root Cramer-Rao bound by 32 to 53 percent for 80 dB of self-interference cancellation and by a factor of 3.4 to 5.6 for 70 dB. An independent finite-difference time-domain model of the final layout in openEMS confirms that the leakage null and the ranking of the designs are preserved.

0.24