CS Paper Radar

Robust Continuous Human Activity Recognition Using Deep Learning and Distributed Radar Sensors

Sohani Munteha Hiam, Mohammad Soleymani

eess.SP ·submitted 2026-09-09 16:37 UTC · v1

Abstract

Continuous human activity recognition (HAR) with distributed radar sensor networks is challenging because Doppler signatures depend strongly on aspect angle, the informativeness of individual radar views varies with motion direction, and activity transitions in uninterrupted sequences are often ambiguous. This paper proposes a ConvNeXt-MHSA-BiGRU framework for frame-wise continuous HAR from Doppler-time spectrograms acquired by five spatially distributed radar nodes. A shared ConvNeXt-inspired encoder extracts time-frequency representations from each radar stream, while radar-wise multi-head self attention (MHSA) models inter-node dependencies and adaptively fuses complementary views. RadarDropout and SpecAugment-style time-frequency masking regularize the network against unreliable radar views and local spectrogram perturbations, whereas stacked bidirectional gated recurrent units (BiGRUs) exploit temporal context for frame-wise classification across activity transitions. The framework is evaluated on nine activities performed by 14 participants using leave-one-person-out (L1PO) subject-independent testing with fivefold cross-validation. It achieves a mean L1PO test accuracy of 87.56% across the 14 held-out subjects and improves recognition performance over the published CNN-RNN baseline. The results demonstrate that combining modern spectrogram encoding, adaptive radar view fusion, and bidirectional temporal modeling provides an effective framework for continuous and distributed radar-based HAR.

Closest papers

Nearest neighbours by meaning across the whole index.

A Universal Raw-IQ Radar Encoder for Cross-Sensor Human Sensing

cs.CV cs.LG ·2026-11-03 ·Jonas Leo Mueller, Dario Zanca, Sebastian Hoefler, Jan Petermann, Thomas Altstidl +3 more
publishedbenchmarkpositioncode/data similarity 0.66
Abstract · Accepted at the 2027 IEEE/CVF Winter Conference on Applications of Computer Vision (WACV)

Radar-based human sensing typically relies on end-to-end task-specific models trained on hand-chosen signal projections, which generalize poorly across unseen users, tasks, and hardware. We argue that the dominant signal processing choice, the micro-Doppler spectrogram, is a poor starting point for transfer because it keeps the Doppler axis, which carrier frequency rescales, and discards the angular axis, which carrier frequency leaves unchanged. We instead pretrain a convolutional beta-VAE without labels on clutter-removed raw radar measurements from four platforms spanning 60 and 77 GHz and 4 to 12 virtual antennas, aligned by a unified spectral interpolation grid. For every downstream benchmark the encoder stays frozen, and only a small supervised temporal classifier is trained on its embeddings. We compare against supervised models trained end to end on each benchmark and a pretrained radar foundation model across ten settings covering activity, gesture, sign-language, and gait recognition. When the test users and the radar are seen during training, our encoder is best on all five benchmarks. For users never seen in training, it leads on three of four benchmarks, by 4.8 to 23.2 points. On subject-disjoint gait recognition, it is best for each of the four held-out subjects and 8.3 points above the strongest baseline on average, even though its pretraining excluded every recording of this radar. Excluding the test radar from pretraining costs at most 5.3 points on any benchmark. Code is available at https://github.com/jonasmueler/UniversalRadarEncoder_WACV.

0.50

Parameter-Efficient Adaptation of Self-supervised Vision Backbones Survives Distribution Shift in Radar Micro-Doppler HAR

cs.LG ·2026-11-19 ·Keryan Chelouche, Petr Dobias, Nistor Grozavu, Olivier Romain
code/data similarity 0.64
Abstract · Submitted to ICASSP2027

Micro-Doppler radar enables contactless, privacy-preserving human activity recognition (HAR), but deployment robustness remains underexplored. We compared full fine-tuning, frozen probing, and parameter-efficient fine-tuning (PEFT) using subject-disjoint in-distribution cross-validation and few-shot cross-age, cross-orientation, and cross-dataset transfer. Full fine-tuning suffered negative cross-dataset transfer, while frozen features under-adapted on cross-orientation. Only PEFT avoided both failures. We paired DINOv3 with all-layer principal-singular-direction adaptation (PiSSA), to our knowledge the first application of a self-supervised image foundation backbone to radar micro-Doppler HAR. DINOv3-PiSSA ranked first among PEFT methods in every evaluated setting. Under our protocol, its Small variant matched the in-distribution accuracy of the prior Base-size PEFT state of the art using 4.5x fewer total parameters, with only 3% trainable. It surpassed a size-matched variant of that baseline in every evaluated setting, with transfer gains increasing with shift severity: 2.1, 6.6, and 8.9 percentage points, respectively. Ablations attributed improvements to both pretraining and adapter recipe, with the pretraining contributing most under compound shift. Code and protocol are available at https://github.com/KeryanChelouche/udoppler-ssl.

0.32

Soft Temporal Alignment Distillation for Camera-to-mmWave Radar Human Activity Recognition

eess.SP ·2026-10-27 ·Jiuqi Yan, Chengbo Zhu, Chengdong Xu, Qisong Wu
similarity 0.63
Abstract · 13 pages, 7 figures

Millimeter-wave (mmWave) radar provides privacy?preserving human activity recognition (HAR), but sparse point clouds limit its representation of body structure and motion. We propose a cross-modal knowledge distillation framework in which a teacher trained on camera-derived two-dimensional (2D) human keypoints supervises a radar-only student. The stu?dent combines PointNet-based point-set encoding, bidirectional temporal modeling, segment-level aggregation, and lightweight shared latent-channel scaling. The teacher retains contextualized states at every time step, whereas the student summarizes the radar sequence into a small number of segments, making fixed timestamp correspondence unsuitable for feature transfer. Soft Temporal Alignment Distillation lets each student segment adaptively retrieve and aggregate teacher temporal evidence into its distillation target. Alignment denotes student-conditioned representation-space matching rather than chronological or monotonic registration. On the Multi-Modal Non-Intrusive 4D Human Dataset (MM-Fi), the method improves radar-only ac?curacy from 87.04% to 89.17%, achieving the highest mean accuracy among the evaluated established and recent distillation baselines. It also obtains higher mean accuracy and macro?averaged F1 score (macro-F1) than the radar student under most evaluated point- and frame-dropout settings. Adaptation to our independently collected millimeter-wave Office Human Ac?tivity Recognition Dataset (mmO-HAR) improves accuracy from 80.33% to 87.75%, supporting the transferability of the distilled radar representation. The teacher and alignment branch are removed after training, enabling privacy-preserving radar-only inference without additional sensing or computational branches.

0.33

A comparison between ceiling-mounted FMCW, IR-UWB and Wi-Fi radar for in-bedroom human activity monitoring and sleep interruption detection

cs.LG ·2026-08-20 ·Anton Lambrecht, Reda El Hail, Xianjun Jiao, Pieter Crombez, Dominique Schreurs +3 more
similarity 0.63
Abstract · This paper has been submitted to IEEE Access Journal and is currently undergoing review

Despite their growing importance for contact-free radio frequency (RF) based healthcare monitoring, different radio technologies such as frequency-modulated continuous wave (FMCW) radar, impulse radio ultra-wideband (IR-UWB), and Wi-Fi sensing are rarely compared under identical deployment conditions, as existing studies typically differ in hardware, datasets, and evaluation methodologies. In addition, the performance of ceiling-mounted radars, despite their practical deployment and cost advantages in healthcare environments, remain underexplored. Therefore, this paper presents a controlled comparison and analysis of ceiling-mounted FMCW, IR-UWB, and Wi-Fi sensing using synchronized recordings from 20 participants across six room layouts. All technologies are evaluated with the same convolutional neural network (CNN) on both a fine-grained 10-class human activity recognition (HAR) task and a coarse 4-class sleep monitoring task. IR-UWB achieves the highest cross-subject activity recognition performance (89.0% macro F1), while FMCW generalizes best to unseen room layouts (83.8% macro F1). For sleep monitoring, all technologies exceed 92% macro F1 in unseen environments. The results reveal a fundamental trade-off between recognition performance and environmental robustness, which can be explained through differences in range resolution, antenna diversity, Doppler resolution, and spatial information retention. These findings provide practical guidelines for the design of healthcare-oriented RF sensing systems.

0.24

Human Activity Recognition via Ultra-Wideband Data: A Framework for Dimensionality Reduction, Pattern Discovery, and Predictive Modeling

cs.LG ·2026-09-25 ·Nahid Sahel Gozin, Reza Sedaghat, Prathap Siddavaatam
similarity 0.58
Abstract · 14 pages, 9 figures. Manuscript prepared for submission to an IEEE journal in machine learning

Recent advances in sensor technology have enabled more effective human activity recognition (HAR), particularly in real-time systems with limited computational resources. However, Ultra-Wideband (UWB) radar data remain challenging due to high dimensionality, noise, complexity, and nonlinear characteristics. This research proposes a framework to efficiently reduce data size, uncover significant patterns, and classify six activity types (Standff, Liedown, Noactivity, Sit, Stand, and Walk) from UWB signals with high accuracy. Two novel dimensionality reduction techniques are introduced in this paper. The first, Clustered Polynomial Expansion with Incremental PCA (CPE-IPCA), combines clustering and polynomial feature expansion with Incremental PCA, preserving 100% of the variance in only 50 components. The second, Post-PCA Standardization Approach (PPSA), standardizes data after PCA and retains 99.1% of the variance in 80 components, achieving superior compression and computational efficiency compared to conventional nonlinear methods. Frequent patterns are identified using Apriori and FP-Growth, which are then classified with Random Forest and a Vector Space Model (VSM). The framework achieves 100% accuracy with Random Forest on CPE-IPCA and 99% on PPSA, while VSM attains 100% precision, recall, and F1 on PPSA and near-perfect performance on CPE-IPCA (precision 1.00, recall 0.98-1.00, F1 0.99-1.00), demonstrating a fast, interpretable, and robust HAR system suitable for healthcare, assisted living, and smart environments.

0.26

Human Activity Recognition using Ceiling-Mounted Multi-Radar Sensors

eess.SP ·2026-10-29 ·Ananya Prabhu, Aditi Site, Tarmo Lipping
similarity 0.57
Abstract

Continuous activity monitoring in assisted living should work without cameras or wearable devices. Radar meets this requirement, but most radar studies use a single sensor and activities recorded in isolation, and few deliver results in real time. We present an indoor monitoring system in which point clouds from three ceiling-mounted radar sensors are fused using density-based clustering, movement and posture features are derived for activity classification, and results are shown on a real-time dashboard. In a preliminary study with eight participants performing everyday activities as one continuous scenario, a random forest reached 74% frame-level accuracy with a random 80/20 split and 68% with leave-one-participant-out evaluation. Without position features, accuracy fell to 46% and 44%, indicating partial dependence on room layout, while window-level features without position reached 67% and 65%.

0.25

Radar Panoptic Transformer: Semantic-Guided Mask Queries for Dynamic Scene Understanding

cs.CV cs.LG ·2026-11-15 ·Mayank Mayank, Bharanidhar Duraisamy, Rohit Mohan, Abhinav Valada
similarity 0.57
Abstract · 9 pages, 4 figures

Automotive radar provides long-range sensing and direct Doppler velocity measurements, but its sparse and non-uniformly sampled point clouds pose significant challenges for panoptic segmentation. Dynamic objects often yield only a few detections amid a dominant static background, providing limiting the geometric cues for separating object instances. We propose \emph{Radar Panoptic Transformer (RPT)}, an end-to-end point-based network that incorporates radar-adaptive feature extraction with semantic-guided mask prediction. Its backbone aggregates pose-aligned temporal context through grouped vector attention and learns per-point neighborhood radii conditioned on range, azimuth, and radar cross section (RCS). Point-wise semantic predictions initialize queries at likely foreground detections and guide masked cross-attention through query-point class agreement, producing instance masks without geometric clustering. An auxiliary RCS-consistency loss matches instance-level statistics between predicted and annotated instances. RPT achieves state-of-the-art performance on RadarScenes with $71.6\%$ mIoU and $82.2\%$ PQ. We further evaluate RPT on MAN TruckScenes, where it outperforms the evaluated baselines in a long-range, full-surround radar setting with sensing ranges up to $230\,\mathrm{m}$. RPT achieves real-time end-to-end inference at $31$\,Hz on RadarScenes, exceeding the sensor frame rate.

0.21

LITEWAY: LIghtweight HAR via Temporal Efficient highWAY

cs.LG cs.AIcs.HC ·2026-08-10 ·Dominique Nshimyimana, Vitor Fortes Rey, Mengxi Liu, Bo Zhou, Paul Lukowicz
publishedcode/data similarity 0.57
Abstract · accepted at UbiComp / ISWC 2026

Wearable human activity recognition (HAR) remains challenging due to the computational and energy constraints of deep learning models on resource-limited devices. Existing lightweight approaches often rely on recurrent architectures (e.g., GRU and LSTM), limiting parallelism and increasing inference latency. We propose LITEWAY, a modality-agnostic, fully convolutional framework for multichannel sensor time series that replaces recurrent temporal modeling with structured convolutional decomposition. LITEWAY combines lightweight convolutional blocks, strided temporal processing, and convolution-attention pooling to efficiently capture temporal dependencies while reducing computational complexity. We evaluate LITEWAY on 16 HAR datasets against TinyHAR, TinierHAR, and MLP-HAR. LITEWAY achieves competitive macro F1 while reducing model size by 4.06x-9.52x (Light) and 3.87x-9.07x (Full) compared with TinyHAR and TinierHAR. Deployment experiments further show energy reductions of 2.29x-3.14x (Light) and 1.46x-2.01x (Full) compared with TinierHAR and MLP-HAR, highlighting efficient fully convolutional temporal modeling for wearable HAR. The source code is publicly available at https://github.com/dominique-nshimyimana/liteway.

0.42