CS Paper Radar

Chypothermia: Clock Freezing for Static Side-channel Attacks

Fatemeh Khojasteh Dana, Mehmet Ali Cetin, Xinrui Wang, Andrew Butler, Yuval Yarom, Shahin Tajik

cs.CR ·submitted 2026-09-10 12:12 UTC · v1

Abstract

Static side-channel attacks, which exploit halted-clock conditions to extract sensitive information, pose an increasing threat to chip security. To counter these attacks, various defenses have been proposed that monitor for abnormal clock behavior and trigger the clearing of sensitive data when clock anomalies are detected. In this work, we demonstrate that exposing a chip to cryogenic temperatures interferes with on-chip mixed-signal components, responsible for signal sensing and generation. Based on this observation, we develop Chypothermia, an attack that, without any electrical tampering with the system, disables the target clock sensor, the clock generation circuit, and the voltage sensors, while preserving the secret data. While effective at halting the clock, cooling is a slow process and, on its own, is often insufficient against systems equipped with temperature sensors designed to detect thermal anomalies. To bypass these protections, we combine Chypothermia with Chypnosis (Mitard et al., IEEE SP 2026) and show that, even within a moderately low-temperature operating range, this combination can halt the clock while evading detection. We implement Chypothermia on multiple FPGA/SoC platforms and demonstrate successful disabling of both soft-IP and hard-IP sensor implementations. Finally, we apply Chypothermia to the alert handler of the OpenTitan root of trust, which incorporates a state-of-the-art clock sensor, and show that the attack evades detection and prevents key zeroization. Finally, we introduce and implement an FPGA-compatible self-heating sensor as a countermeasure and demonstrate its robustness against Chypothermia.

Closest papers

Nearest neighbours by meaning across the whole index.

NonSense: On the (In)security of FPGA Anti-tamper Sensors

cs.CR ·2026-11-12 ·Mehmet Ali Cetin, Fatemeh Khojasteh Dana, Saleh Khalaj Monfared, Nima Seyed Aghazadeh, Maryam Saadat Safa +1 more
similarity 0.64
Abstract

FPGAs are widely used in mission-critical systems, where a successful physical attack can have serious consequences. This makes resilience to such attacks a critical security requirement. To defend against active physical attacks, such as glitching attacks, modern FPGAs rely on on-chip sensors that detect these disturbances and trigger responses, such as key zeroization, before a device is compromised. These sensors are deployed as both hard-IP blocks and soft-IP cores, and their trustworthiness is often taken for granted. In this work, we challenge that assumption and argue that the sensors themselves are a fragile and underexplored attack surface. Drawing on recent results, we show that both the detection and response mechanisms of state-of-the-art sensors can be bypassed without invasive tampering. We further argue that sensor reliability is reduced by factors rarely captured in threat models, including the spatial and frequency-dependent behavior of the system's power delivery network, which can steer a fault to a target while sparing nearby sensors; environmental conditions such as temperature, which shift detection thresholds; and long-term aging, which drifts sensor calibration and may open silent detection gaps. Finally, we propose a set of countermeasures that harden detection and response mechanisms against these effects.

0.40

SensorGuard-RV: Sensor-to-Register Data Protection for Resource-Constrained RISC-V Devices

cs.CR cs.AR ·2026-11-05 ·Hamid Noori, Carlton Shepherd
hot direction similarity 0.63
Abstract

Embedded systems rely on sensor measurements that traverse a complex hardware-firmware stack (e.g. peripheral interfaces, communication buses, memory, and drivers) before reaching the applications that use them. At worst, an attacker with access to this path may successfully intercept, overwrite, fabricate, or replay readings. This may cause systems that act on such data, such as flight controllers and industrial processes, to behave incorrectly or unsafely. Existing defences, such as trusted execution environments and trusted I/O paths, still depend on trusted driver software and correctly configured access control, which remain fragile in practice. In response, we present SensorGuard-RV, a hardware-first approach that delivers sensor samples into processor registers without trusting intermediate software, buses, or memory. After configuration, a write-once ownership switch hands the sensor to a fixed-function controller that performs hardware-level authenticated encryption on sensor samples under a key inaccessible to software. We develop a new RISC-V instruction then instructs the CPU to decrypt the sample and writes it to a register only after verifying its tag and rejecting replays, including across resets. We implement SensorGuard-RV on the NEORV32 core with an ADXL362 SPI accelerometer on an Artix-7 FPGA. At 100 MHz, a protected sample reaches a register in 5,191 cycles (51.9 $μ$s), of which the two Ascon authenticated encryption engines account for 30. Because fixed-function acquisition removes per-byte software polling, the protected loop sustains 19,015 transactions/s, 5.3% above a software-driven SPI baseline. The added logic (3,155 LUTs and 2,215 registers; 5.0% and 1.7% of the device) is dominated by the Ascon engine and preserves the 100 MHz clock, while estimated power rises from 118 to 368 mW.

0.29

JENGA: Exploiting Counter-Based RowHammer Countermeasures to Break Real-Time Predictability

cs.CR cs.AR ·2026-09-01 ·Valentin Abgrall, Marcello Traiola, Ruben Salvador, Maria Méndez Real, Alessandro Palumbo +1 more
published similarity 0.56
Abstract · To appear at the 47th IEEE Symposium on Real-Time Systems (RTSS) 2026, 14 pages, 11 figures, 1 table

Safety-critical real-time systems must satisfy multiple dependability requirements, notably time predictability and security. In such systems, tasks must complete within bounded and known execution times, typically characterised through Worst-Case Execution Time (WCET) analysis. At the same time, DRAM-based platforms are increasingly sensitive to the RowHammer read-disturbance security vulnerability, which has motivated the development of numerous hardware and software countermeasures in both academia and industry. However, the impact of these defences is generally evaluated in terms of average-case performance, a metric that is insufficient for safetycritical real-time systems, where worst-case behaviour is the primary concern. In this paper, we study the impact of RowHammer countermeasures based on hardware counters on the timing behaviour of real-time systems. We use a Per-Row-Activation-Counter (PRAC) countermeasure as a case study, standardised for recent DDR5 memories, and show that it can introduce significant timing variations. Based on this observation, we introduce JENGA, an attack in which an attacker-controlled task manipulates the internal state of the RowHammer countermeasure mechanism to increase the execution time of a victim real-time task beyond its expected WCET. We implement JENGA in a gem5 and Ramulator 2.0 simulation environment and evaluate its impact on TACLeBench workloads. We show that such an attack can delay tasks up to 200% of their WCET, making the initial timesafety assumptions unsafe. To address this issue, we derive a safe analytical bound that accounts for mitigation-induced delays in WCET analysis for DRAM systems protected by hardware countermeasures, such as PRAC-N.

0.26

Not Discrete Enough: On the Inherent Insecurity of dTPMs for Measured Boot

cs.CR ·2026-08-13 ·Christian Werling, Tahmid Zahin, Jean-Pierre Seifert
top venueposition similarity 0.56
Abstract · Published in: 2025 Annual Computer Security Applications Conference Workshops (ACSAC Workshops)

Measured Boot, a mechanism enabled through Trusted Platform Modules (TPMs), is commonly used for passwordless protection of data-at-rest, aiming to protect data when the device is lost or stolen. Microsoft's standpoint is neutral on which way a TPM should be implemented: Firmware-based TPMs (fTPMs) are viewed as more economical but less secure. Despite the inherent susceptibility to bus sniffing attacks, discrete TPMs (dTPMs) are still seen as the gold standard, as many deliver better on-paper tamper resistance. It is often argued that attacks against the bus can be mitigated by bus encryption and, ideally, mutual authentication between the CPU and TPM. This position paper aims to emphasize another inherent, difficult-to-mitigate attack against dTPMs that was originally shown against a TPM 1.1 over 20 years ago: We demonstrate that even brief physical access to a TPM 2.0 and the ability to boot from an attacker-controlled system enable an attacker to reset and replay arbitrary measurements, thereby allowing an attacker to unseal, for example, a disk encryption key solely protected by the TPM. While there have been attacks against fTPMs, too, we argue that their practical attack surface is fundamentally smaller. Bus protection techniques can be used to protect dTPMs, but only guard against passive attacks. After all, we argue that, from a security standpoint, firmware TPMs, or any TPM internal to the SoC, are superior to discrete (external) ones. Lastly, in order for dTPM-based setups to provide meaningful protection of sealed secrets, configurations must require a user-provided PIN or password along with the Measured Boot configuration.

0.29

Foundations of Hardware-Software Leakage Contracts

cs.CR cs.AR ·2026-10-14 ·Jan Reineke
published similarity 0.56
Abstract · Author's manuscript. Final publication is available at Springer via https://link.springer.com/chapter/10.1007/978-981-95-8617-2_4

Microarchitectural attacks such as Spectre and Meltdown undermine security by exploiting software-visible side effects of microarchitectural optimizations like caches and speculative execution. To use modern hardware securely, programmers must take into account the security implications of these optimizations. Yet instruction set architectures (ISAs)---the conventional abstraction layer between hardware and software---are ill-suited for secure programming: by design, they abstract from microarchitectural details and therefore fail to reflect their security consequences. A new security abstraction is emerging to fill this void: hardware-software leakage contracts. To support the principled development of secure software on modern hardware such contracts characterize side-channel leakage at the ISA level. Thereby they enable programmers and compilers to generate code that is provably resistant to side-channel attacks---without having to explicitly reason about the microarchitecture. On the other hand, they provide a specification for hardware designers to ensure that microarchitectures do not introduce unintended and undocumented side channels. This paper introduces the foundations of this emerging topic, discussing recent contributions and unresolved challenges along the way.

0.28

SenTrojan: Revealing Analog Hardware Trojan Attacks on Sensors

cs.CR ·2026-11-04 ·Kun Wang, Ruochen Zhou, Wenjun Zhu, Shilin Xiao, Kai Wang +3 more
top venue similarity 0.56
Abstract · accepted by NDSS 2027

Sensors bridge the physical and digital worlds, making their integrity critical to cyber-physical system security. Existing sensor attacks largely exploit unintended and sensor-specific physical vulnerabilities, limiting their generalizability and motivating a different threat model, i.e., whether an adversary can implant hidden attack surfaces into sensors before deployment. In this paper, we present SenTrojan, an analog hardware Trojan framework for sensors. SenTrojan embeds malicious functionality into analog signal circuitry commonly shared across diverse sensor architectures, and activates the hidden behavior through crafted external physical signals. Once activated, SenTrojan can induce sensor malfunctions ranging from permanent denial-of-service to static or dynamic spoofing. To achieve these effects under different architectural constraints, we introduce two complementary designs. The Logic-Rule-Driven (LRD) Trojan adds lightweight analog monitoring logic to detect trigger features such as frequency and amplitude, enabling reliable activation across various sensor types. The Physical-Effect-Driven (PED) Trojan targets sensors with exploitable native analog effects, e.g., nonlinearity and rectification, and realizes attacks with minimal component insertion. We evaluate SenTrojan on 14 sensors spanning 6 transduction principles and demonstrate its effectiveness across diverse real-world scenarios. Overall, SenTrojan achieves an average successful trigger rate above 95%, maintains over 97% similarity to benign behavior, incurs zero false-trigger rate for LRD designs, and introduces less than 5% average deviation in drift, noise floor, and response time. To our knowledge, this work is the first systematic study of analog sensor Trojans, broadening sensor security from unintended physical vulnerabilities to intentional supply-chain compromise.

0.49

SLAC: Access-Driven CPU-to-GPU Side-channel Attacks via System-Level Cache on Apple Silicon

cs.CR cs.AR ·2026-08-10 ·Tianhong Xu, Saion K. Roy, Ruyi Ding, Aidong Adam Ding, Yunsi Fei
top venue similarity 0.55
Abstract · Accepted to ACM CCS 2026. 15 pages

Modern heterogeneous System-on-Chip designs integrate CPU cores and a GPU that share a last-level cache (LLC) or system-level cache (SLC). This sharing exposes a new cross-domain attack surface, and existing attacks on integrated platforms either exploit coarse-grained cache-occupancy contention or require the adversary to co-reside on the GPU with the victim to obtain accurate timing measurements. In this work, we target Apple Silicon heterogeneous SoCs and discover that GPU memory accesses leave set-level footprints in the shared SLC, observable to an unprivileged CPU process. This keen observation enables the first fine-grained, access-driven, Prime+Probe-style CPU-to-GPU cache side-channel attacks against GPU workloads. We first reverse-engineer the Apple M1 SLC set-indexing functions and the interactions between local private caches and the SLC. Building on these findings, we construct the CPrime+CProbe SLC side-channel technique, which monitors GPU victim activity from the CPU at cache-set granularity. We then introduce an accelerated variant, GPrime+CProbe, in which an adversary leverages the GPU for faster SLC priming, yielding a 6.4x increase in the covert-channel throughput. Lastly, we demonstrate two end-to-end privacy attacks using the new side-channels: a graph-edge reconstruction attack on Graph Neural Networks (GNNs) that achieves 90% edge accuracy across five datasets, and an LLM privacy attack that recovers input keywords with up to 94.8% accuracy and model responses with up to 88.9% accuracy across TinyLlama and GPT-2 Medium models. Our results reveal a new class of microarchitectural vulnerabilities in Apple Silicon and call for secure system cache designs for heterogeneous SoCs.

0.37

HAWC-Leak: Heterogeneous Architecture Workload Classification utilizing Side-Channel Leakage

cs.CR ·2026-10-21 ·Muhtasim Alam Chowdhury, Arthur Kim, Rozhin Yasaei, Soheil Salehi
similarity 0.55
Abstract

Modern heterogeneous computing platforms, which integrate general-purpose processors with specialized accelerators such as FPGAs, have become the standard for high-performance and embedded applications. However, the shared physical resources of these systems introduce critical security vulnerabilities, where power consumption patterns can leak sensitive runtime information. While side-channel analysis is well established for extracting cryptographic keys from isolated algorithms, existing methods struggle to profile complex, dynamic systems where diverse workloads coexist on shared hardware resources. This paper presents HAWC-Leak, a dynamic workload classification framework designed to identify specific hardware accelerator tasks in real time using non-invasive power analysis. Unlike prior studies focused on extracting cryptographic secrets from isolated implementations, our approach profiles heterogeneous runtime behavior using machine learning to predict active workloads from features extracted from power traces. We implement a complete hardware-in-the-loop measurement testbed using the ChipWhisperer CW305 Artix-7 FPGA platform to capture high-resolution power signatures of diverse workloads including Advanced Encryption Standard (AES-128), Elliptic Curve Cryptography (ECC P-256), Secure Hash Algorithm (SHA-256), Convolutional Neural Network (CNN), and a system idle state. We develop a Hierarchical Random Forest classifier that processes real-time power data to identify the executing application in controlled mixed-activity scenarios where multiple accelerators are instantiated but only one executes at a time. Experimental results demonstrate that this framework achieves 100% classification accuracy across all evaluated scenarios, confirming that power consumption patterns serve as a reliable and distinctive fingerprint for profiling heterogeneous runtime behavior.

0.25