CS Paper Radar

Pneumatic neurons for soft robots enable inflate-and-fire networks for rhythmic motion

Dongting Li, Michael Tolley, Nick Gravish

cs.RO ·submitted 2026-09-10 22:34 UTC · v1

Abstract

Animals coordinate their movements through distributed neural circuits, but soft robots still typically depend on external, centralized electronics for control. Building soft robots that operate without centralized electronic controllers while remaining responsive to their environment remains a frontier challenge in soft robotics. In this work we introduce a soft-robot control architecture inspired by leaky integrate-and-fire models of biological neural circuits. The Pneumatic neuron (Pneu-ron) is a soft actuator that unifies energy conversion, logic, and actuation in one component. Each module combines a low-boiling-point fluid (LBF), a heater, and a mechanical switch into a self-excitable unit. Boiling the LBF inflates the module and triggers excitation and inhibition of adjacent modules in a process we call "inflate-and-fire". When interconnected into excitatory-inhibitory rings, Pneu-rons generate stable, sequential oscillations whose frequency emerges from the material dynamics and environmental conditions. By harnessing the inflation of Pneu-rons for actuation these networks can drive oscillatory locomotion of soft robots. Pneu-ron networks sustain oscillation under mechanical load and thermal variations, adapting through material physics rather than computation. Dynamical modeling of these networks reveals a dimensionless bifurcation diagram that dictates the network's oscillatory behavior. Encoding logic and actuation into material-level modules presents a new avenue for adaptive, electronics controller-free, soft robots.

Closest papers

Nearest neighbours by meaning across the whole index.

On Energy-Based Modelling for Fluidic Excitable Neurons

eess.SY ·2026-11-12 ·Robin Wroblowski, Brent Michiels, Benjamin Gorissen, Rodolphe Sepulchre
similarity 0.69
Abstract · 6 pages, 5 figures, submitted to European Control Conference 2027

Motivated by the potential of pneumatic excitable devices in soft robotics, this paper develops an energy-based, domain-agnostic equivalent of the Hodgkin-Huxley modelling framework using bond graph theory. The proposed model is used to guide the design of a pneumatic excitable neuron. The potential of this approach is illustrated through the design of a pneumatic half-center oscillator, an essential building block for rhythmic neuromorphic behaviours.

0.19

Pneumatic Units for Logic-based Sequential Excitation (PULSE) in Wearable Haptic Devices

cs.HC cs.RO ·2026-08-20 ·Jessica Healey, Anoush Sepehri, Michael T. Tolley, Tania K. Morimoto
similarity 0.61
Abstract · 9 pages, 6 figures

Soft, wearable robotic devices can deliver haptic feedback to support a wide range of tasks, such as extended reality, training various skills, and rehabilitation. Pneumatic actuation can deliver complex haptic feedback, is lightweight and compliant, and can be incorporated into textiles, making it promising for wearable applications. These soft pneumatic devices, however, typically require a valve and input for each pneumatic actuator, making it challenging to develop fully portable devices for at-home use. In this work we present a pneumatic unit for logic-based sequential excitation (PULSE). The PULSE is a flat, textile-based pneumatic actuator with embedded fluidic logic. By combining these actuators into a fluidic ring oscillator, we decreased the typical amount of required pneumatic inputs for a haptic forearm sleeve by 60%, with the ability to scale. We built the ring oscillator by optimizing design variables to reach desired periods of oscillation. We demonstrated a set of tactile stroking cues with periods ranging from 1.16 to 1.56 s and forces ranging from 1.07 to 2.04 N. We assessed the sleeve's ability to render differentiable, pleasant, and continuous haptic cues in a user study. The forearm sleeve containing PULSEs successfully delivered four directional cues and guided users to target wrist angles with fast reaction times, low overshoot amounts, and a 93.3% average accuracy of correct initial directions.

0.18

Power-of-Two Leaky Integrate-and-Fire Neurons for Event-Driven Vision-Language-Action Inference

cs.AI ·2026-10-24 ·Rui Liu, He Lv, Ziyao Zhang, Rui Ma, Rongxiang Nie
similarity 0.59
Abstract

Vision-language-action (VLA) models have demonstrated strong capabilities in robotic manipulation, yet their reliance on dense, continuous-valued computation presents a fundamental challenge for energy-constrained deployment. Inspired by the sparse, event-driven signaling and temporal integration mechanisms of biological neurons, a promising alternative is to introduce spiking computation into VLA models. However, enabling such computation without restructuring pretrained policies or compromising closed-loop control remains an open challenge. To address this challenge, we introduce the Power-of-Two Leaky Integrate-and-Fire (PoT-LIF) neuron, which emits signed spikes with power-of-two amplitudes. By combining magnitude-coded spike events with residual-preserving membrane dynamics, PoT-LIF enables continuous information to be progressively represented through discrete spikes. The Heartbeat formulation further localizes this process within weighted projections, bridging biologically inspired spiking computation and pretrained VLA architectures without modifying their external inference interfaces. We integrate PoT-LIF into the vision projection, vision-language projection, and action projection of $π_{0.5}$ and evaluate both operating modes over 2,000 paired closed-loop LIBERO episodes per configuration. Standard-mode PoT-LIF VLA achieves success rates of 96.90% and 96.35% at $T = 1$ and $T = 2$, respectively, while Heartbeat mode achieves 97.25% and 96.90% at $T = 2$ and $T = 4$, compared with 96.70% for the original continuous-activation $π_{0.5}$ baseline. At $T = 1$ with a 60.01% firing rate, PoT-LIF uses approximately 1/7.67 of the dense-reference arithmetic energy, corresponding to a modeled reduction of 86.95%.

0.15

Neural Circuit Architectural Priors for Rat Locomotion

cs.AI q-bio.NCcs.LGcs.NE+1 ·2026-11-17 ·Nikhil X. Bhattasali, Jaron Cui, Lerrel Pinto, Grace W. Lindsay
published similarity 0.57
Abstract · NeurIPS 2026. 10 pages main text, 41 pages total, 7 figures in main text. Code and videos: https://rat-ncap.github.io/

Animals generate behavior through continuous interactions between their neural circuits, bodies, and environment. Embodied simulations study these interactions by testing neural circuit models in biologically realistic settings. Recent efforts have simulated diverse animals, and emerging work on biologically grounded neural architectures has begun to integrate circuit connectivity and single-unit dynamics from experimental data into artificial neural networks, introducing stronger inductive biases and closer mechanistic alignment with biology. How can we develop embodied simulations that enable the study of increasingly complex bodies and neural circuits? In this work, we address the challenge through coordinated advances in the simulated body, neural architecture, and training infrastructure. We introduce Rat v2, an efficient and flexible biomechanical body for simulating rat behavior. To control this body, we develop Rat NCAP, a biologically grounded neural architecture for locomotion based on mammalian spinal circuits that incorporates cell-type-specific connectivity and a novel flexor-extensor neuromechanical interface. To optimize circuit parameters, we develop GPU-accelerated simulation and training infrastructure. The model learns to locomote at different speeds and transition between gaits without imitation learning, producing locomotion statistics, kinematics, and cell-type-specific neural activity consistent with experimental data. Analyses reveal that the neuromechanical interface substantially affects trainability and gait quality, and in silico cell-type ablations reproduce known gait phenotypes and predict gait changes under graded perturbations. Together, these findings support the view that embodied simulations at an intermediate level of abstraction can simultaneously reproduce complex behavior and yield mechanistic insights into the neural circuits that generate it.

0.51

Learning the Dynamics of Deformable Linear Objects Through Coupled Oscillators for Bimanual Robotic Manipulation

cs.RO ·2026-11-17 ·Iván López-Broceño, Maximilian Stölzle, Daniel Feliu-Talegon, Daniela Rus, Cosimo Della Santina
similarity 0.55
Abstract

Many learning-based approaches for deformable linear objects (DLOs) rely on simplified deformation models that neglect dynamic effects and the mechanical response of the objects, limiting their applicability to lightweight, compliant objects and slow motions. Inspired by recent advances in learning physically structured dynamics with coupled oscillator networks (CONs), we propose $Φ$-CON for learning force-driven DLO dynamics. The model combines a floating-base coupled oscillator network (FBCON), whose latent potential energy depends only on the DLO's shape, with a learned affine diffeomorphism $Φ$ between observed positions along the DLO and latent coordinates. Its shape dynamics are stable by construction, and its Lagrangian structure yields explicit expressions for kinetic and potential energy. We exploit this structure to design a model-based proportional-derivative (PD) controller that compensates for the learned potential forces, thereby establishing closed-loop stability guarantees and ensuring convergence. We evaluate the approach on four simulated DLOs and a real bimanual robot setup. In simulation, $Φ$-CON achieves prediction accuracy comparable to neural ordinary differential equation (NODE) models and Lagrangian neural networks (LNNs), with $97.2\%$ and $90.2\%$ fewer parameters, respectively. Relative to a model-free PD baseline, the proposed controller reduces mean endpoint regulation error by $97.5$-$99.7\%$ in simulation and achieves a mean per-target reduction of $27.9\%$ across both endpoints in real-world experiments, demonstrating the importance of explicitly accounting for the mechanical response of stiff and heavy objects.

0.24

PneuGen: Task-Driven Agentic Co-Design of Soft Pneumatic Robots

cs.RO ·2026-11-09 ·Shaohong Zhong, Marco Pontin, Perla Maiolino
similarity 0.55
Abstract

Task-driven design of soft robots requires the consideration of factors such as geometry, morphology, material properties, and actuation, resulting in a large and complex design space that is challenging to explore. Computational optimisation methods leverage signals from simulation to iteratively improve designs to achieve task objectives. However, these methods typically demand high computational load for both optimisation and simulation. We present PneuGen, an agentic co-design framework for soft robots that leverages Large Language Model (LLM) agents to search over the soft robot design space efficiently. A designer agent proposes design programs from a parametric component library, and a separate critic agent analyses simulation diagnostics and recommends targeted revisions. Fitted module response models provide reusable physical priors relating geometry and pressure to deformation. Design programs are automatically validated and converted into finite-element simulations, enabling iterative evaluation. Across grasping tasks on primitive shapes and challenging objects, as well as shape-matching tasks that require multi-directional planar and 3D deformation, the proposed framework significantly outperforms prior computational optimisation baselines. Ablation experiments also highlight the utility of the critic agent and the module response model in facilitating efficient design. We additionally demonstrate the agent-generated soft robot designs in real-world shape-matching and grasping tasks.

0.12

DVA-Neurons: Design and Verification of Adaptive LIF Neurons: From Single-Neuron Dynamics to Multi-Neuron Spiking Networks

cs.AI cs.AReess.SP ·2026-09-19 ·Thanh Pham, Riadul Islam
similarity 0.53
Abstract

Spiking Neural Networks (SNNs) offer a promising path toward ultra-low-power artificial intelligence inference by emulating the event-driven computation of biological neurons. However, two challenges limit their practical deployment. First, fixed-parameter Leaky Integrate-and-Fire (LIF) neurons lack the adaptation mechanisms observed in biology, where neurons modulate their excitability based on firing history. Second, scaling from single neurons to multi-neuron networks introduces challenges in synaptic weight distribution and inter-neuron spike routing that are absent in isolated designs. This paper addresses both issues through the extension, verification, and physical implementation of adaptive LIF neurons at three architectural scales. This work contributes: a 2nd-order neuron with two-stage synaptic filtering for richer temporal dynamics; a fully-connected 6-neuron spiking network with configurable weights (100 to 5) demonstrating weight-based inter-neuron communication; and a direct verification methodology enabling per-cycle observation of all internal states. All designs were synthesized targeting Selected Area Electron Diffraction (SAED) 14 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology at 1 GHz and verified with Cocotb-based Python testbenches under pulsed current stimuli (amplitude 80, ISI=3). The results show that adaptation effectively modulates firing: 31% suppression in the 2nd-order neuron (25 vs.\ 36 spikes) and 31% reduction in postsynaptic firing in the network (18 vs.\ 26 spikes). Physically, the 2nd-order neuron costs 1.77x more area and 1.52x more power than the 1st-order baseline, while the 6-neuron network demonstrates near-linear scaling (5.7x area, 5.3x power). Seven verification bugs spanning testbench connectivity, fixed-point overflow, and Verilog expression-width semantics are documented.

0.21

Ferrofluid Shape Control with Deep Reinforcement Learning

cs.RO ·2026-11-18 ·Anthony Czubarow, Antonio Terpin, Raffaello D'Andrea
similarity 0.52
Abstract

Ferrofluids are liquids containing magnetic nanoparticles, enabling shape control through external magnetic fields. This deformability supports their use as soft robotic bodies that can navigate confined spaces and manipulate objects. Their nonlinear continuum dynamics, however, make reliable control challenging. Existing work shows how spatial magnetic fields from electromagnet arrays can establish and maintain desired ferrofluid configurations. A complementary objective is to exploit the fluid's dynamics under limited actuation to reach prescribed shapes that may not be sustainable at equilibrium. Here, we use deep model-based reinforcement learning to control these transient shapes. Learning directly through physical interaction, our policies select current commands for a single fixed electromagnet based on visual observations, guiding the moving ferrofluid toward prescribed geometries. The learned policies repeatedly attain a variety of shapes spanning polygons, asterisks and pentominoes. These results demonstrate that learning directly from physical interaction enables reliable fluid shaping, opening new possibilities for controlling ferrofluid-based soft robots.

0.30