CS Paper Radar

On Energy-Based Modelling for Fluidic Excitable Neurons

Robin Wroblowski, Brent Michiels, Benjamin Gorissen, Rodolphe Sepulchre

eess.SY ·submitted 2026-11-12 06:59 UTC · v1

Abstract

Motivated by the potential of pneumatic excitable devices in soft robotics, this paper develops an energy-based, domain-agnostic equivalent of the Hodgkin-Huxley modelling framework using bond graph theory. The proposed model is used to guide the design of a pneumatic excitable neuron. The potential of this approach is illustrated through the design of a pneumatic half-center oscillator, an essential building block for rhythmic neuromorphic behaviours.

Comment
6 pages, 5 figures, submitted to European Control Conference 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Pneumatic neurons for soft robots enable inflate-and-fire networks for rhythmic motion

cs.RO ·2026-09-10 ·Dongting Li, Michael Tolley, Nick Gravish
similarity 0.69
Abstract

Animals coordinate their movements through distributed neural circuits, but soft robots still typically depend on external, centralized electronics for control. Building soft robots that operate without centralized electronic controllers while remaining responsive to their environment remains a frontier challenge in soft robotics. In this work we introduce a soft-robot control architecture inspired by leaky integrate-and-fire models of biological neural circuits. The Pneumatic neuron (Pneu-ron) is a soft actuator that unifies energy conversion, logic, and actuation in one component. Each module combines a low-boiling-point fluid (LBF), a heater, and a mechanical switch into a self-excitable unit. Boiling the LBF inflates the module and triggers excitation and inhibition of adjacent modules in a process we call "inflate-and-fire". When interconnected into excitatory-inhibitory rings, Pneu-rons generate stable, sequential oscillations whose frequency emerges from the material dynamics and environmental conditions. By harnessing the inflation of Pneu-rons for actuation these networks can drive oscillatory locomotion of soft robots. Pneu-ron networks sustain oscillation under mechanical load and thermal variations, adapting through material physics rather than computation. Dynamical modeling of these networks reveals a dimensionless bifurcation diagram that dictates the network's oscillatory behavior. Encoding logic and actuation into material-level modules presents a new avenue for adaptive, electronics controller-free, soft robots.

0.20

Neural Circuit Architectural Priors for Rat Locomotion

cs.AI q-bio.NCcs.LGcs.NE+1 ·2026-11-17 ·Nikhil X. Bhattasali, Jaron Cui, Lerrel Pinto, Grace W. Lindsay
published similarity 0.53
Abstract · NeurIPS 2026. 10 pages main text, 41 pages total, 7 figures in main text. Code and videos: https://rat-ncap.github.io/

Animals generate behavior through continuous interactions between their neural circuits, bodies, and environment. Embodied simulations study these interactions by testing neural circuit models in biologically realistic settings. Recent efforts have simulated diverse animals, and emerging work on biologically grounded neural architectures has begun to integrate circuit connectivity and single-unit dynamics from experimental data into artificial neural networks, introducing stronger inductive biases and closer mechanistic alignment with biology. How can we develop embodied simulations that enable the study of increasingly complex bodies and neural circuits? In this work, we address the challenge through coordinated advances in the simulated body, neural architecture, and training infrastructure. We introduce Rat v2, an efficient and flexible biomechanical body for simulating rat behavior. To control this body, we develop Rat NCAP, a biologically grounded neural architecture for locomotion based on mammalian spinal circuits that incorporates cell-type-specific connectivity and a novel flexor-extensor neuromechanical interface. To optimize circuit parameters, we develop GPU-accelerated simulation and training infrastructure. The model learns to locomote at different speeds and transition between gaits without imitation learning, producing locomotion statistics, kinematics, and cell-type-specific neural activity consistent with experimental data. Analyses reveal that the neuromechanical interface substantially affects trainability and gait quality, and in silico cell-type ablations reproduce known gait phenotypes and predict gait changes under graded perturbations. Together, these findings support the view that embodied simulations at an intermediate level of abstraction can simultaneously reproduce complex behavior and yield mechanistic insights into the neural circuits that generate it.

0.51

Excitable Behaviours of a First-Order High-Pass Neuron Model

eess.SY ·2026-11-10 ·Jérôme Adriaens, Guillaume Drion, Pierre Sacré, Alessio Franci, Gustave Bainier
similarity 0.51
Abstract · 6 pages, 8 figures

With the rise of neuromorphic technologies, simple and tunable neuron models are needed to analyse and design spiking systems. However, the simplest neuron models, e.g., Leaky Integrate-and-Fire (LIF) models, usually fail to capture the excitable behaviours of biological neurons. This could be a significant limitation, as excitability enables reliable spike timing under parametric uncertainties. Recently, a minimal excitable model, the so-called High-Pass Model (HPM), was introduced in neuroengineering. It simply consists of a static sigmoid with a high-pass filter in positive feedback. Given its novelty, it is still unclear how easily the HPM can be tuned, and how much of the excitable behaviours of a biophysical neuron it can reproduce. To address these questions, we investigate the tunability of a first-order HPM sub- and supra-rheobase, i.e., below and above the onset of the tonic spiking regime (where the neuron spikes periodically), and compare its behaviours with those of a simple Hodgkin-Huxley-type Conductance-Based Model (CBM). Below rheobase, both models fire spikes in response to transient inputs, including post-inhibitory rebound spikes. Above rheobase, an affine reparametrization of the input of the HPM suffices to fit its frequency-current curve to that of a CBM. The two models mostly differ near their respective rheobases, where the first-order HPM lacks bistability and spike latency. We suggest that modifying the frequency-selective element of the HPM may be sufficient to overcome this limitation. These results highlight the potential of the HPM as a fundamental computational primitive in neuromorphic, spike-based technologies.

0.44

Towards Design of Efficient Neuromorphic Controllers

eess.SY ·2026-11-10 ·Koen Scheres, Erik Steur, Maurice Heemels
similarity 0.51
Abstract · Submitted to European Control Conference 2027

One of the major sources of inspiration for neuromorphic engineering is the central nervous system, which is orders of magnitude more efficient than classical digital clock-based computers. Neuromorphic control aims at recreating this efficiency in control systems, combined with (formal) stability and performance guarantees. In our previous work [1], we have established formal guarantees for the emulation of static output feedback controllers implemented using integrate-and-fire neurons. In this paper, we investigate the ``efficiency'' of the resulting controllers in terms of sparse spiking activity. By changing the network structure of our original implementation, foregoing the unit gain assumption made in our previous work, we will establish that the chosen architecture of the spiking controller significantly affects its sparsity and discuss the implications of these observations for the efficient implementation of spiking controllers.

0.22

Pneumatic Units for Logic-based Sequential Excitation (PULSE) in Wearable Haptic Devices

cs.HC cs.RO ·2026-08-20 ·Jessica Healey, Anoush Sepehri, Michael T. Tolley, Tania K. Morimoto
similarity 0.50
Abstract · 9 pages, 6 figures

Soft, wearable robotic devices can deliver haptic feedback to support a wide range of tasks, such as extended reality, training various skills, and rehabilitation. Pneumatic actuation can deliver complex haptic feedback, is lightweight and compliant, and can be incorporated into textiles, making it promising for wearable applications. These soft pneumatic devices, however, typically require a valve and input for each pneumatic actuator, making it challenging to develop fully portable devices for at-home use. In this work we present a pneumatic unit for logic-based sequential excitation (PULSE). The PULSE is a flat, textile-based pneumatic actuator with embedded fluidic logic. By combining these actuators into a fluidic ring oscillator, we decreased the typical amount of required pneumatic inputs for a haptic forearm sleeve by 60%, with the ability to scale. We built the ring oscillator by optimizing design variables to reach desired periods of oscillation. We demonstrated a set of tactile stroking cues with periods ranging from 1.16 to 1.56 s and forces ranging from 1.07 to 2.04 N. We assessed the sleeve's ability to render differentiable, pleasant, and continuous haptic cues in a user study. The forearm sleeve containing PULSEs successfully delivered four directional cues and guided users to target wrist angles with fast reaction times, low overshoot amounts, and a 93.3% average accuracy of correct initial directions.

0.18

A Novel Algorithm to Simulate Conductance-based Neuronal Networks

eess.SY ·2026-11-06 ·Amir Shahhosseini, Rodolphe Sepulchre
theory similarity 0.50
Abstract

Conductance-based models are central to neurophysiology and neuromorphic engineering, yet their simulation scales poorly to large networks. We study and analyze an iterative solver that operates in signal space. Each iteration reduces to $N$ decoupled scalar linear time-varying differential equations, one per neuron, which are solved in parallel and in closed form. The solver admits two complementary interpretations: a variable metric forward-backward splitting method, rooted in operator theory, and a waveform relaxation quasi-Newton method, rooted in circuit simulation. We prove uniform and superlinear convergence, with a bound that reflects the conductance structure of the dynamics. The algorithm is illustrated on the classical Hodgkin--Huxley neuron and on networks of up to 5000 neurons.

0.28

Neuromodulation Through Intrinsic Noise

eess.SY q-bio.NC ·2026-11-10 ·Sunghyun Koo, Jin Gyu Lee, Rodolphe Sepulchre
similarity 0.50
Abstract · Submitted to European Control Conference (ECC) 2027

Neuromodulation, the modulation of excitability through the regulation of neuronal parameters, is a key tool in neuromorphic control design. This paper investigates how spiking excitability can be modulated by intrinsic noise. Focusing on a simplified memristive neuron model, we show that intrinsic noise plays distinct functional roles depending on the feedback pathways: Intrinsic noise in the fast excitatory feedback shapes the nature of excitability and modulates the sensitivity of the neuron to external/internal stimuli, whereas that in the slow inhibitory feedback provides internal stimuli that can trigger stochastic spiking. We expect these findings to guide the design of neuromorphic systems that harness intrinsic noise to exploit beneficial stochastic phenomena, such as stochastic resonance.

0.23

Sensing to Intelligence: Principles for Neuromorphic Circuits and Systems

cs.NE ·2026-09-19 ·Saptarshi Maiti, Chetan Singh Thakur
position similarity 0.50
Abstract

Neuromorphic engineering began with the idea that the physical behavior of a system could itself be used for computation, taking inspiration from the way nervous systems sense, adapt, and evolve in time. The field has since expanded far beyond its early analog circuits to include event-based sensors, spiking processors, emerging memory devices, mixed-signal systems, and large-scale neural accelerators. With this expansion, however, the meaning of neuromorphic has become increasingly broad. In this Perspective, we argue that neuromorphic engineering should be defined neither by resemblance to biological components nor by any particular device, signal representation, or substrate. Its potential lies in identifying computational principles in biological systems and translating them into the organization and dynamics of artificial machines. A system is truly neuromorphic when the invoked biological or physical principle plays a causal, design-relevant role in how information is represented, how state evolves, or what capability the complete system achieves. We develop this view across sensing, collective computation, memory, learning, and interaction. Adaptation, nonlinear dynamics, attractor structure, variability, and closed-loop action illustrate how computation can be embedded in a machine's evolving physical state. From these examples, we identify a set of design principles for neuromorphic systems. As neuromorphic engineering moves toward wider deployment, this perspective shifts the central question from how closely machines resemble nervous systems to what computation becomes possible when their principles are understood and deliberately translated into new machines.

0.23