CS Paper Radar

From Time to Channels: Robust and Efficient Local Flaw Detection in Steel Wire Ropes Using Tri-Axis MFL Signals

Siyu You, Yibo Zhang, Shengbo Xu, Yanhui Yang, Huayi Gou, Wen Wu, Bo Du, Fang Xie, Zhiliang Liu

eess.SP ·submitted 2026-09-14 12:05 UTC · v1

Abstract

Steel wire ropes (SWRs) are critical load-bearing components whose local flaws (LFs) pose serious safety risks. Magnetic flux leakage (MFL) inspection commonly detects LFs from temporal or axial morphology, which can change with the sensing axis and operating condition. We show instead that LF responses remain localized over neighboring channels of a circular array. This observation motivates a channel-feature-oriented (CFO) detector that removes smooth channel backgrounds, applies circular matched filtering, and fuses spatially co-located tri-axis responses. Experiments performed on real-world equipment show that CFO attains the highest localization performance among three representative baselines, reaching F1@0.5/F1@0.7 scores of 73.9%/59.5%. It attains the best temporal localization performance under all four conditions and achieves at least 19.4 times the throughput of the evaluated signal-processing baselines. These results demonstrate that circular channel locality provides a robust LF representation across the evaluated operating conditions.

Closest papers

Nearest neighbours by meaning across the whole index.

Distribution-free false-alarm calibration and chance-corrected spatial evaluation for industrial anomaly detection

cs.CV cs.LG ·2026-08-15 ·Jie Deng
theory similarity 0.50
Abstract · 15 pages, 3 figures, 9 tables

Studies of industrial visual inspection commonly report the area under the receiver operating characteristic curve (AUROC) and the overlap between anomaly maps and defect masks. Neither measure specifies the false-alarm rate at a selected threshold, while recurrent defect locations and mask geometry can inflate overlap. We combine a distribution-free upper tolerance threshold with a paired-minus-crossed spatial test. This test compares each detector's score-contributing locations with the matched defect mask and with masks from other images; the difference in rates defines spatial-evidence lift relative to the empirical chance-overlap rate. We evaluate three detectors on 120 point-defect images from three ISP-AD modalities and three fixed data splits. Of 378 alarms, 230 overlap the matched mask. Paired and crossed rates are nevertheless similar in eight of nine detector--modality cells; only DINOv2--ASM has a positive 95\% bootstrap lower bound (lift 0.259, 95\% interval 0.159--0.347). On the independent Magnetic Tile Defect dataset, the same analysis gives lifts of 0.203 (0.169--0.236) for Wide ResNet-50 (WRN50) patch memory and 0.231 (0.202--0.262) for Vision Transformer B/16 (ViT-B/16) patch memory, with one-sided permutation $p=10^{-5}$ for both. When crossed masks are restricted to the same defect class, the lifts remain 0.185 and 0.210. Exact sample planning shows that, with 150 calibration normals, a 95\%-confidence distribution-free claim is supported only for target false-positive rates of 1.98\% or higher; a 1\% target requires at least 299 normals. The results support reporting operating-point performance and chance-corrected spatial evidence alongside AUROC and raw mask overlap.

0.10

CF-YOLO: Context-Aware Feature Refinement for Camouflaged Industrial Micro-Defect Detection

cs.CV ·2026-08-28 ·Xinda Yu, Kunxin Zheng, Chunan Yu, Qingbo Song, Hao Xiao +2 more
benchmarkdatasetcode/datahot direction similarity 0.49
Abstract

Automated detection of surface micro-defects on industrial components, such as copper tubes, is critically important for quality assurance but remains challenging due to the minute scale of anomalies and their visual camouflage against complex backgrounds. These factors lead to weak feature representations and high rates of false positives and missed detections. To address these issues, we propose a novel real-time detection framework designed for efficient context perception and feature refinement. Our method integrates a Context-Perception Aggregation Module (CPAM), which synergises large-kernel perception for macro-texture context and small-kernel aggregation for sharp boundary delineation, effectively breaking the background camouflage. Furthermore, a Feature Additive Refinement Module (FARM) employs a linear-complexity additive token mixer to globally verify and refine the representation of fine-grained anomalies, suppressing noise-induced errors. To support research in this domain, we introduce the Copper Tube Defect Dataset (CTDD), a manually annotated benchmark containing 1,847 images and 4,898 boundingbox defect instances from copper-tube inspection scenarios. Extensive experiments demonstrate that our detector achieves strong and consistent performance on CTDD, outperforming representative baseline detectors, including YOLOv11, by 2.2% in mAP@50 and 3.9% in Precision while maintaining real-time inference speed. This work provides a robust and efficient solution for high-precision industrial inspection, bridging the gap between contextual understanding and detailed feature analysis. Our code and model are available at: https://github.com/Yu-Xinda/CFYOLO-Context-Aware-Feature-Refinement-for-Camouflaged-Industrial-Micro-Defect-Detection

0.43

GaugeDefect: Detecting Surface Anomalies by Curvature of Feature Transport

cs.CV ·2026-09-08 ·Yefan Wang
published similarity 0.48
Abstract · Accepted at the 9th Chinese Conference on Pattern Recognition and Computer Vision (PRCV 2026)

Industrial anomaly localization has advanced rapidly with feature-based, reconstruction-based, and distillation-based methods. Most of these methods score a region by asking how unusual its local appearance or feature representation is with respect to normal training images. This is a strong and practical formulation. In this work, we study a complementary geometric cue for cases where an abnormal region may still contain locally plausible visual features. Thin scratches, small dents, and disrupted repeated patterns often do not make every local patch individually abnormal; instead, they disturb how nearby features vary and connect across the surface. We propose GaugeDefect, a geometric method for surface anomaly localization based on the curvature of feature transport. Given a feature lattice, we estimate a local feature frame at each node and compute orthogonal transports between neighboring frames. The accumulated transport around a small closed loop gives a holonomy matrix, whose deviation from identity measures feature-transport curvature. After calibration on normal training images, unusually large curvature indicates a local inconsistency in the feature field. The curvature here is not the physical curvature of the inspected object, but a representation-space measure of neighborhood inconsistency. This makes the method applicable to curved surfaces, textured materials, and non-planar industrial objects. Its main role is to improve localization of subtle surface disruptions, while often producing sharper responses near defect boundaries as a natural consequence of the curvature signal.

0.30

Exploiting Per-Core Leakage: Electromagnetic Side-Channel Monitoring of Multicore Architectures

cs.CR ·2026-08-28 ·Daehyeon Bae, Sujin Park, Insup Lee, YoungGiu Jung, Kyeongsik Lee +2 more
published similarity 0.47
Abstract · 7 pages, 9 figures. Accepted at the 63rd ACM/IEEE Design Automation Conference (DAC 2026)

Multicore processors are increasingly adopted in embedded systems to meet growing performance demands. However, physical side-channel analysis of multicore architectures remains underexplored, as obtaining usable leakage is inherently challenging. Consequently, side-channel security research on such systems has lagged far behind, leaving a critical security gap. To address this gap, we reveal the electromagnetic leakage mechanisms in multicore architectures and, for the first time, demonstrate per-core leakage exploitation, thereby enabling physical side-channel analysis for these systems. As a practical extension, we present a non-intrusive side-channel monitoring method that achieves per-core granularity. To validate its feasibility and practicality, we implement a prototype on a heterogeneous SoC platform with an RF front-end, and evaluate on a commercial off-the-shelf quad-core embedded system, the Raspberry Pi 4B with ARM Cortex-A72 cores.

0.37

Gradient-Field Frequency Encoding for 1D Localization of Magneto-Mechanical Resonators

eess.SP eess.SY ·2026-10-05 ·Fabian Mohn, Martin Möddel, Tobias Knopp
similarity 0.46
Abstract · 4 pages, 3 figures

Magneto-mechanical resonators (MMRs) have emerged as promising passive sensors for wireless localization and remote inductive sensing in industrial and medical environments. However, fundamental limits on achievable localization accuracy using the spatial sensitivity profiles of receive coils remain a key challenge. In this work, we demonstrate that an MMR - comprising two permanent magnets in an anti-parallel arrangement - exhibits a measurable shift in its mechanical resonance frequency in response to an externally applied magnetic field, a property we exploit for spatial encoding. We derive and experimentally validate a method that maps frequency shifts of 1D positions within a known magnetic gradient field, demonstrating accurate localization along a linear trajectory. This gradient-field frequency encoding approach constitutes a conceptually distinct alternative to conventional sensitivity encoding with receiver coil arrays, with the potential to simplify hardware requirements while improving localization accuracy.

0.27

TEEP-RCNN: Texture-Enhanced Edge-aware Perception for Steel Surface Defect Detection via Improved Convolutional Block Attention in Faster R-CNN

cs.CV ·2026-09-23 ·Kirtan Rajesh
benchmark similarity 0.45
Abstract

Steel surface defect detection is critical for automated industrial quality control but remains challenging due to subtle inter-class texture differences and pronounced class imbalance. We introduce TEEP-RCNN (Texture-Enhanced Edge-aware Perception Region-based CNN), a two-stage detector built on Faster R-CNN with a Feature Pyramid Network backbone and an improved Convolutional Block Attention Module (CBAM). Our CBAM adds dropout regularization in the channel attention MLP and batch normalization on the spatial attention branch, reducing co-adaptation and stabilizing gating logits. Training uses a differential learning rate protocol with cosine annealing warm-up, separating update rates for the pre-trained ResNet-101 backbone and the detection head. At inference, predictions are refined via Test-Time Augmentation fused with Weighted Box Fusion (WBF), improving localization stability on elongated and boundary-adjacent defects. On the NEU-DET benchmark across six defect categories, TEEP-RCNN achieves 73.3\% mAP@50 and 37.9\% mAP@50-95 in only 10 training epochs on a single GPU, competitive with YOLOv11m (76.2\% mAP@50, 100 epochs) while outperforming it on the rolled-in-scale category under the COCO metric. Per-class analysis shows the spatial attention branch is most effective on elongated texture defects such as patches and scratches, while crazing remains an open challenge across both paradigms due to its distributed non-local texture structure.

0.14

FreqSpaNet: Frequency and Spatial Learning of SFPF for Physical Layer Hardware Integrity Detection

cs.LG ·2026-09-15 ·Xiaoxuan Huang, Jinlong Xu, YiZhe Wang, Meng Zhang, Xian Li +1 more
similarity 0.44
Abstract · 5 pages, 6 figures

Unauthorized hardware replacement can preserve a wireless device's logical identity while altering its physical implementation, posing a challenge to hardware integrity verification. Spatio-frequency polarization fingerprints (SFPFs) capture device-dependent responses across multiple frequencies and directions, but their frequency and spatial dimensions exhibit different structural dependencies. We propose FreqSpaNet, an SFPF representation learning network for open set hardware anomaly detection. A frequency branch captures local variations among neighboring frequencies, while a geometry-aware spatial branch models directional relationships using angular information. The two representations are combined through adaptive fusion, and complementary pretraining further captures shared information while preserving the distinct characteristics of the frequency and spatial representations. Experiments show that FreqSpaNet achieves a mean AUROC of 96.31\%, 9.05 points above the baseline. Results under seven hardware replacement scenarios further verify the effectiveness of FreqSpaNet.

0.32

Turning Multipath into Positioning Information: Persistent Electromagnetic-Twin DoA Localization

eess.SP ·2026-10-29 ·Tuo Wu, Zhentian Zhang, Ye Tian, Hing Cheung So
similarity 0.44
Abstract · 13 pages, 11 figures

Reflected paths can support localization when line-of-sight (LoS) links are blocked, but their usefulness depends on how accurately the stored model predicts their directions. This paper develops electromagnetic-twin (ET) direction-of-arrival (DoA) localization with a persistent, physically calibrated path-angle field. A nominal floor plan supplies virtual-path geometry, and sparse reference probes at known positions learn a compact directional correction. Field order and regularization are selected from calibration data alone. For each user, unordered DoAs are processed by joint position estimation and one-to-one path association, using assignment-aware multistart search and robust Gauss--Newton refinement. New trusted probes update the stored correction through recursive least squares (RLS), without reprocessing all previous measurements. The analysis establishes calibration rank conditions, objective descent, and conditional information gains from reflected paths, while also distinguishing the decay of initialization bias from the convergence of localization error. Synthetic experiments use 500 queries per operating point. At 50% LoS blockage and $1.5^\circ$ DoA error, the calibrated ET achieves 0.39 m root-mean-square error, versus 0.55 m for nominal geometry. After a wall change, its final error is 0.43 m, versus 0.63 m for a frozen calibrated map. Equal-evidence comparisons show competitive calibrated alternatives and faster abrupt-change recovery with sliding-window updates than with the configured RLS. The results support reusable directional calibration, not a universally superior map or update rule, and validation is limited to synthetic first-order reflections with trusted calibration labels.

0.39