CS Paper Radar

Learning to Exploit Passive Dynamics for Energy-Efficient Target Hopping of a Spring-Legged Quadcopter

Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or, Mingyi Liu

cs.RO cs.LG ·submitted 2026-09-14 12:14 UTC · v1

Abstract

Combining aerial thrust with spring-loaded hopping makes monopedal quadcopters promising for locomotion over complex terrain, but heuristic proportional-integral-derivative (PID) tuning limits coordination between active thrust and passive contact dynamics. We present a direct estimated-state-to-motor Proximal Policy Optimization (PPO) policy that commands four motors without an explicit hopping state machine or low-level attitude PID. Its reward combines Energy-Manifold Shaping for mass-normalized vertical-energy tracking and apex-state anchoring with Efficiency Shaping, which uses a history-aware power estimator to penalize general power use, impose an additional airborne-power cost, and penalize airborne near-stationarity. In representative hardware runs, the PPO-based control stack reduced cycle-averaged measured electrical power by 30.7% and mean total normalized thrust by 49.8% relative to the tuned PID-based control stack, while retaining repeatable commanded-height hopping and more concentrated landings. These observations are consistent with improved use of passive dynamics and reduced measured electrical demand.

Comment
8 pages, 10 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter

cs.RO ·2026-09-14 ·Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or +1 more
similarity 0.83
Abstract · 9 pages, 10 figures

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

0.21

Battery-Aware Reinforcement Learning for Aggressive Quadrotor Flight

cs.RO ·2026-09-29 ·Alejandro Sanchez Roncero, Olov Andersson, Petter Ogren
similarity 0.69
Abstract · 9 pages, 9 figures, 4 tables. Submitted to ICRA 2027. Supplementary video: https://youtu.be/-JTRXvstFAo

Agile flight tasks such as drone racing and pursuit-evasion require strong acceleration and precise turns, but the available thrust changes as the battery discharges and voltage drops under load. Conservative command limits make this variation easier to tolerate, at the cost of unused performance. We investigate how learned controllers can use that additional thrust while retaining the flight controller's voltage compensation and rate control. Our training simulator couples an identified load-transient battery model to rotor dynamics and firmware saturation. The feedforward policy receives filtered voltage during both training and deployment. Controlled ablations distinguish the benefit of a larger thrust-command range from that of voltage information. On a 38 g Crazyflie Brushless, the resulting policy reduces circle tracking error by 49% relative to stock-authority RL at 3.84 m/s, while preserving easy-task precision. Mean 20-lap race time decreases from 106.22 s to 95.24 s. Compared with a voltage-blind policy with the same increased authority, hardware error and race time are lower by 15.3% and 4.5%, respectively. In simulation, replacing the policy's voltage input with a recording from a different battery condition worsens hard-circle tracking, with a smaller, voltage-dependent effect in racing. Together, these results show where a simple voltage input complements existing actuator compensation in aggressive learned flight.

0.26

Energy-Efficient Gait Adaptation via Hierarchical Reinforcement Learning for Quadrupedal Locomotion Across Diverse Terrains

cs.RO cs.LG ·2026-10-07 ·Ammar Issa, Anubhav Singh, Anton Tsaritsin, Sergey Kolyubin
similarity 0.64
Abstract · 9 pages. Submitted to IEEE ICRA 2027. Ammar Issa, Anubhav Singh, and Anton Tsaritsin contributed equally

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

0.27

Learning Air-Ground Motion Control with Temporal Mode Switching and Cross-Terrain Tracking

cs.RO ·2026-09-22 ·Ruitian Pang, Mingrui Li, Xuanting Liu, Tiancheng Lai, Juncheng Chen +8 more
similarity 0.62
Abstract

Passive-wheeled terrestrial-aerial bimodal vehicles (TABVs) combine aerial mobility with energy-efficient ground locomotion. However, reliable air-ground mode switching under limited onboard perception and robust ground trajectory tracking across diverse terrains remain challenging when targeting real-world applications. In this work, we propose a learning-based air-ground motion control framework for passive-wheeled TABVs: 1) a learned mode selector for autonomous air-ground motion mode switching. The selector uses historical single-point time-of-flight (ToF) measurements and robot states together with future reference information to determine the active locomotion mode. 2) a reinforcement learning control policy for trajectory tracking. The policy combines proprioceptive observations with future reference information to anticipate trajectory changes. For ground locomotion, multi-terrain training and dynamics randomization enable robust tracking across different terrains. Simulation and real-world experiments demonstrate reliable air-ground switching under limited perception and accurate ground tracking across diverse terrain conditions. The learned selector outperforms a rule-based mode selector in challenging transitions, while the ground controller achieves lower position RMSE than PID across all tested conditions and maintains decent tracking where NMPC fails. With these capabilities integrated, the system tracks a 101m air-ground trajectory through multiple autonomous mode transitions with a position RMSE of 0.08m.

0.13

Curriculum-Guided Reinforcement Learning for Energy-Efficient UAV-ISAC in Post-Disaster Search-and-Rescue Operations

cs.NI eess.SY ·2026-09-01 ·Tai-You Guo, Chuan-Chi Lai
similarity 0.62
Abstract · 14 pages, 9 figures, 4 tables. Submitted to an IEEE journal

Uncrewed aerial vehicles (UAVs) are promising platforms for integrated sensing and communication (ISAC), but their limited onboard energy creates a strong coupling among sensing accuracy, communication quality, and propulsion cost. This paper proposes a curriculum-guided soft actor-critic (CG-SAC) framework with propulsion-aware reward shaping for energy-efficient UAV-ISAC, jointly optimizing the 3D trajectory, communication-sensing power split, and per-user power allocation. A rotary-wing propulsion model is incorporated to derive a closed-form propulsion-economic cruising speed, which is used to construct a propulsion-aware speed-shaping term within a normalized composite reward together with navigation, node-visiting, energy-efficiency, and constraint-penalty terms. A log-linear curriculum progressively tightens the communication, sensing, and proximity requirements during training. Across 2000 randomized scenarios, CG-SAC achieves an average energy efficiency of 0.72 Mbits/J, substantially outperforming the evaluated DRL baselines. Among successfully completed missions, it requires 107.6 steps on average, corresponding to a 66%--82% reduction in flight steps relative to the baselines. Crucially, the learned policy exhibits mission-aware speed adaptation by decelerating near service points and accelerating during transit, while achieving a 99.6% communication-rate satisfaction ratio at service instants. Ablation results further demonstrate the complementary roles of the reward components in balancing mission feasibility and energy efficiency.

0.26

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

cs.RO ·2026-09-01 ·Yutong Wang, Dongjae Lee, Xiaofeng Guo, Yuanzhu Zhan, Yufei Jiang +7 more
benchmarkhighly cited similarity 0.62
Abstract · 28 pages, 7 figures, 15 tables

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

0.47

Design and Control of a Multimodal Legged-Aerial Robot Through Separate Control Contraction Metrics

cs.RO eess.SY ·2026-10-19 ·Kaushik Venkatesh Krishnamurthy, Eric Sihite, Alireza Ramezani, Morteza Gharib
published similarity 0.62
Abstract · Presented at 2026 IEEE International Conference on Intelligent Robots and Systems, Pittsburgh PA

The integration of dynamic legged locomotion and aerial mobility offers versatility that is deterred by challenges in payload distribution, actuation, and the contrasting requirements of both domains. In this paper, we present the design and operation of a multimodal quadrupedal aerial-legged robot. The presence of legged aerial systems also allows for thruster-assisted legged locomotion, which we make possible with a unified control framework using Control Contraction Metrics (CCM). We search for separate domain-specific contraction metrics for walking and flight independently offline and unify them using an online energy-based Control Lyapunov Function Quadratic Program (CLF QP). This enables optimal, cross-domain control allocation, which we show using simulations. We also show experimental results that validate the mechanical viability of our hardware and the paradigm of thruster-assisted trotting. The stability of said experiments motivates the deployment of the control framework for multimodal operations.

0.20

Battery-Aware Predictive Trajectory Planning and Control for Multirotors Under Disturbances

cs.RO eess.SY ·2026-09-10 ·Krishna Bhavithavya Kidambi
similarity 0.61
Abstract

This paper presents a battery-aware predictive trajectory-planning and control framework for multirotors operating under spatially localized disturbances. Candidate trajectories are evaluated through closed-loop vehicle--motor--battery propagation, allowing disturbance-induced control demand, electrical energy, battery evolution, and terminal-voltage-dependent actuator capability to enter the planning process. % A reduced-order battery model is numerically benchmarked against an independently implemented Simscape equivalent-circuit reference, with a power NRMSE of $0.64\%$ and a cumulative-energy discrepancy below $0.7\%$. % In a $150$-s, $640$-m mission containing three disturbance regions, the selected trajectory reduces electrical energy consumption by $7.46\%$ and position-tracking RMSE by approximately $72\%$ relative to the disturbance-aware fixed-reference baseline. % Planner ablations show that battery-dependent terms are nonbinding at nominal SOC but alter the selected trajectory under a depleted-battery stress condition. % Execution with multiple feedback controllers further demonstrates that controller selection changes the tradeoff among tracking accuracy, energy consumption, and actuator utilization. % The results demonstrate the benefit of accounting for predicted closed-loop energetic and battery--actuator consequences during trajectory selection.

0.26