CS Paper Radar

Hydrogen-Diesel Dual-Fuel Engine Operation Using Real-Time GRU-Based Nonlinear Model Predictive Control

Alexander Winkler, Vasu Sharma, Julian Bedei, Edward Sperling, Charles Robert Koch, David Gordon, Jakob Andert

eess.SY ·submitted 2026-09-14 16:22 UTC · v1

Abstract

Hydrogen-diesel dual-fuel (H2DF) combustion reduces combustion-out CO2 emissions but exhibits nonlinear cycle-to-cycle dynamics at high hydrogen energy shares (HES). This work evaluates nonlinear model predictive control (NMPC) with a gated recurrent-unit deep neural network dynamics model for transient H2DF control. Trained on 99,800 engine cycles, the model predicts indicated mean effective pressure, nitrogen oxides (NOx), particulate matter (PM), and maximum pressure-rise rate. Single-cylinder Cummins 4.5 L experiments follow an unseen 4,900-engine-cycle trajectory. Compared with production diesel-only control, NMPC improves load-tracking mean absolute error by 27.8% and reduces mean PM by 61.1%, while mean engine-out NOx increases by 105.1% without exhaust-gas recirculation. Mean and peak HES reach 39.7% and 55.1%; a high-hydrogen setting achieves 77.8% peak HES without constraint violations. Robust to feedback noise and model-plant mismatch and executing in 3 to 7 ms per engine cycle on low-cost embedded hardware, learned-dynamics NMPC enables practical, real-time, constraint-aware transient H2DF control with substantial diesel substitution.

Comment
Submitted to International Journal of Hydrogen Energy

Closest papers

Nearest neighbours by meaning across the whole index.

Deep Behaviour Cloning of Model Predictive Control for Real-Time Operation of a Hydrogen-Diesel Dual-Fuel Engine

eess.SY ·2026-09-27 ·Alexander Winkler, Neeraj Naduvath Mana, David Gordon, Jakob Andert
similarity 0.84
Abstract · Submitted to Control Engineering Practice

Hydrogen-diesel dual-fuel (H2DF) combustion engines offer a promising pathway for decarbonising hard-to-electrify transport sectors, yet their highly nonlinear dynamics and coupled process variables demand constraint-aware control strategies. Model Predictive Control (MPC) meets these requirements but requires an online optimisation in every combustion cycle, which limits deployment on low-cost embedded hardware. This paper trains a feedforward deep neural network (DNN) by behaviour cloning (BC) to imitate an MPC expert, using 86,000 engine cycles of demonstration data collected at 1500 min-1 on a modified Cummins QSB 4.5-litre hydrogen dual-fuel engine. Two variants, one with process feedback and one without, are validated experimentally. Both track unseen fast-transient load steps (3-8 bar indicated mean effective pressure, IMEP) with normalised root mean square error (NRMSE) values of 7.80% and 9.03% against the expert's 8.01%, while keeping mean NOx and particulate matter emissions at or below those of the expert. Inference takes 2 ms or less on a Raspberry Pi 400 (ARM Cortex-A72 at 2.2 GHz), including 1 ms communication latency, compared to up to 7 ms for the MPC expert, a 3.5x speedup. Open-loop profiling on a low-cost ESP32 microcontroller at 180 MHz gives 4.3 ms per inference, 4x faster than required for the 18 ms cycle window. Beyond the training range the cloned policy saturates its controls but exceeds the pressure-rise-rate limit. To the authors' knowledge, this is the first experimental BC controller for cycle-to-cycle combustion control of an internal combustion engine (ICE), trained from demonstrations recorded on the engine itself.

0.07

Artificial intelligence-based predictive fuel blending control for flare gas mitigation

eess.SY ·2026-08-24 ·Josip Kir Hromatko, Šandor Ileš, Rube Huljev, Velibor Vučković
published similarity 0.52
Abstract · 6 pages, 10 figures

This paper describes a fuel blending algorithm based on artificial intelligence and model predictive control. A gas-fired power plant was modeled using physical laws and on-site measurements. A neural network is used to calculate the methane number of the fuel and determine the fuel blending ratio limits so that the methane number is within the limits specified by the engine manufacturer. A model predictive controller adjusts the final blending ratio to meet safety requirements and minimize operating costs. The algorithm was tested in simulations with different scenarios and a reduction in both the operating costs and amount of flaring was observed.

0.41

Enhanced Agriculture-informed Neural Network by Domain Knowledge

cs.LG ·2026-09-16 ·Ci Lin, Futong Li, Rose Chong-Wu, Tet Yeap, Iluju Kiringa
similarity 0.51
Abstract

Accurate prediction of nitrous oxide (N2O) emissions from agriculture is important for assessing environmental impacts and supporting sustainable farming. However, prediction remains difficult because N2O emissions result from complex interactions among soil properties, climate, biochemical processes, and management practices, while high-quality observations are limited. Deep learning models can capture nonlinear relationships but often lack physical interpretability and may generalize poorly across environmental conditions. We propose the Knowledge-enhanced Agriculture-informed Neural Network (KAINN), a hybrid neural-mechanistic framework that extends the Agriculture-informed Neural Network by incorporating domain knowledge about fertilizer diffusion, soil respiration, and water-filled porosity. We evaluate KAINN using CNN, LSTM, and Transformer architectures across multiple growing seasons and input-feature configurations. The results show that KAINN generally provides lower root mean square error and mean absolute error and higher R-squared values than purely data-driven models and the original AINN. Analysis of the learned interfaces also shows smoother and more physically consistent parameter trajectories with reduced uncertainty. These findings demonstrate that incorporating environmental knowledge into neural networks can improve the reliability, interpretability, and generalization of agricultural N2O-emission predictions.

0.25

Hierarchical Control via MPC-RL for Multi-Timescale Battery Systems

eess.SY ·2026-10-02 ·Rasa Pourjam, Ehecatl Antonio del Río Chanona, Paulina Quintanilla
similarity 0.50
Abstract

Multi-timescale systems present a fundamental challenge, where fast operational decisions must coexist with long-horizon sustainability targets. In this work, we propose a new hierarchical control framework via Model Predictive Control (MPC) and Reinforcement Learning (RL) to separate decision-making on two distinct timescales. The high-level MPC optimizes long-horizon setpoints at the slow dynamic and on a fast timescale, a low-level pretrained RL agent tracks these setpoints in real time to maximize short-term objectives. RL is introduced to learn nonlinear control policies, without relying on model linearizations or requiring the heavy online computation from solving repeated optimal control problems. The framework is applied to a Battery Energy Storage System (BESS) operating in frequency regulation markets to balance fast profit opportunities (seconds) and slow battery degradation (weeks to months). The design employs a degradation-aware RL agent trained offline to generate safe long-horizon setpoints, and a degradation-unaware agent fine-tuned from it for fast runtime setpoint tracking. Compared to MPC baselines, the proposed approach successfully extends battery lifetime by 84% and increases operational profit by 34%.

0.17

Interpretable Multifidelity Learning with Kolmogorov-Arnold Networks for Spatiotemporal Nuclear Reactor Flow Modeling

cs.LG ·2026-10-04 ·Meredith Eaheart, Majdi I. Radaideh
similarity 0.49
Abstract · 33 pages, 15 figures,9 tables, and a preprint under peer review

High-fidelity computational fluid dynamics (CFD) simulations of nuclear reactor systems are computationally expensive, motivating machine learning methods that reduce cost while preserving accuracy. Multifidelity surrogate modeling addresses this by combining inexpensive low-fidelity data with limited high-fidelity data. This work investigates whether the high-fidelity data required to predict the spatiotemporal mass flow rate across all 193 fuel assemblies of a pressurized water reactor (PWR) core can be reduced, comparing black-box multifidelity feedforward neural networks (MFNNs) with interpretable multifidelity Kolmogorov-Arnold Networks (MFKANs). Cross-fidelity correlation across the core is weak, making this a challenging multifidelity problem, and neither architecture predicts the transient particularly well in absolute terms. MFKAN nonetheless performs comparably to MFNN for one-time-step-forward prediction while also providing closed-form symbolic equations unavailable with MFNN. To address the scarcity of CFD transients, with only one available per fidelity level, TabDDPM-generated synthetic data was used to augment cross-fidelity forecasting. KAN and FNN achieve comparable self-evaluation accuracy (Pearson correlation of roughly 0.73--0.81), but both perform poorly at true cross-fidelity forecasting (correlations of 0.03--0.06). Assembly-level analysis shows that each assembly's forecast correlation tracks its real cross-fidelity correlation for both architectures ($r=0.840$--$0.896$ for KAN, $r=0.804$--$0.903$ for FNN), confirming that forecasting accuracy is fundamentally limited by how correlated the fidelity levels already are. Overall, KAN-based multifidelity modeling achieves accuracy consistently comparable to MFNN across all settings, while additionally providing symbolic equations that match or exceed the spline representation's accuracy.

0.27

Model-Free Control for Residential Heating: Deployment and Simulation of Nonlinear Data-Enabled Predictive Control

eess.SY math.OC ·2026-09-18 ·Sebastian Zieglmeier, Chris Verhoek, Jaap Eising, Mathias Hudoba de Badyn
similarity 0.49
Abstract · 19 pages, 8 figures, 7 tables

Residential heating accounts for a large share of building energy use, and predictive control strategies can reduce it by anticipating rather than reacting to the room temperature alone. The usual manner of implementing predictive control, model predictive control (MPC), requires an accurate model of each individual residential unit for heating control. Obtaining this model is time-consuming to obtain manually or even impossible, and such models do not transfer across a heterogeneous building stock. Data-enabled predictive control (DeePC) removes this modeling step by designing the controller directly using measured trajectories of the system. The foundations of DeePC, however, are built on the class of deterministic linear time-invariant systems, which is an unrealistic assumption for residential heating. This work applies three recently proposed nonlinear extensions of DeePC, collectively referred to as data-driven predictive control (DPC): Select-DPC, gain-scheduling DPC, and linear parameter-varying DPC. These are compared against standard DeePC and the hysteresis controller, the industry standard in residential heating. The comparison runs over a full heating season on a calibrated digital twin of an occupied research unit, the NEST research building in Switzerland, assessed by heating energy and comfort-band violation. Moreover, gain-scheduling DPC was deployed on the real residential apartment and validated the conclusions from the simulations. Each of the DPC controllers consumes significantly less energy than the hysteresis controller, amounting to roughly $11\%$ over the season, validating the use of DPC. The nonlinear methods further outperform linear DeePC in all assessed scenarios, and we analyze the relative costs and benefits of each nonlinear method.

0.40

A tale of perfect fit and phantom optima: how data-driven models can fail in real-time optimization

eess.SY cs.AI ·2026-08-24 ·Prithvi Dake, Rahul Bindlish, James B. Rawlings
benchmark similarity 0.49
Abstract

Real-time optimization (RTO) relies on process models to locate economically optimal operating conditions. Because developing first-principles models requires significant process knowledge, data-driven alternatives are increasingly attractive. Modern machine-learning models can fit historical plant data accurately and often pass standard validation tests. Whether such models can be trusted for economic optimization, however, remains unclear. We investigate this question using a vinyl acetate monomer benchmark process with a unique, well-conditioned economic optimum. We train a structured hybrid model that combines known mass balances and thermodynamics with a neural-network closure for unknown kinetics, and a fully data-driven neural ordinary differential equation (ODE) model. Both models reproduce plant measurements accurately and exhibit little variation in predictions across random initializations. Yet their economic optima differ substantially from that of the plant. Where the plant returns a single optimum on multistart search, the trained models return many phantom optima. We further show that the training optimizer alone can be yet another source of error. Even with noise-free data and initialization at weights that recover the plant optimum, stochastic gradient training can drift to weights that yield substantially worse RTO solutions. The identified model is thus an artifact of the training optimizer as well as the data. These results demonstrate that a good predictive fit of all available measurements does not guarantee reliable economic performance. A data-driven model for RTO should at least be required to recover the optimum on a decision-oriented benchmark like the one developed here before being considered for plant testing and application.

0.23

A Deep Learning-Based Stacking Ensemble Framework for Turbofan Engine Remaining Useful Life Prediction

cs.AI ·2026-08-28 ·Limon Bin Hossain, Md. Salehin Seyam, Md Rashedul Islam, Abdur Rahman, Md Sharifuzzaman
benchmark similarity 0.49
Abstract

This study proposes a two-level stacking ensemble framework for Remaining Useful Life (RUL) prediction of turbofan engines, evaluated on the NASA C-MAPSS benchmark using the FD001 and FD003 subsets. The framework integrates four heterogeneous deep learning base learners: Long Short-Term Memory (LSTM), Convolutional Neural Network (CNN), CNN-LSTM, and CNN-GRU, whose out-of-fold predictions are combined by an XGBoost meta-learner to capture complex degradation patterns while mitigating individual model biases. Comprehensive experiments demonstrate that the stacking ensemble achieves superior predictive performance, with Root Mean Square Error (RMSE) of 9.989 and 8.613, Mean Absolute Error (MAE) of 7.081 and 5.195, and R-squared values of 0.899 and 0.906 for FD001 and FD003, respectively. Compared to the best-reported baseline (TCAT: RMSE 11.12 and 11.02), the proposed method achieves RMSE reductions of 10.2 percent and 21.8 percent for FD001 and FD003, respectively. Feature correlation analysis, residual diagnostics, and training convergence curves validate the model's robustness. These findings underscore the efficacy of stacking ensemble methods for prognostics and health management in safety-critical aerospace applications.

0.29