CS Paper Radar

Review on Electric Railway System Optimization: Train Dynamic Scheduling, Energy Management, and Storage Integration

Fei Liu, Can Wan, Stefan Östlund, Qianwen Xu

eess.SY ·submitted 2026-09-15 10:15 UTC · v1
survey

Abstract

The modernization of railway systems is being driven by the need for greater efficiency, sustainability, and intelligent operation. In this review, recent advancements in dynamic scheduling, energy management, and energy storage systems (ESSs) integration within electric railway networks are analyzed. Optimization strategies for train scheduling and operation control are reviewed, with a focus on methods that reduce energy consumption and improve overall system performance. The role of energy storage technologies is analyzed in terms of energy management, peak shaving, and voltage and frequency control for practical application. The integration of artificial intelligence and advanced control strategies is also reviewed in electrified railway systems. This review provides a comprehensive overview of current research trends and outlines future directions for the development of resilient, energy efficient, and intelligent railway systems with ESSs integration.

Closest papers

Nearest neighbours by meaning across the whole index.

Two-stage Coordinated Energy Management of Train Operation and Wayside Energy Storage System for Rail Power Supply Systems

eess.SY ·2026-09-15 ·Fei Liu, Niklas Biedermann, Stefan Östlund, Qianwen Xu
similarity 0.77
Abstract

The increasing electrification of railway power supply system (RPSS) intensify the operational and economic challenges at the railway power system interface. Energy storage systems (ESSs) can provide fast and flexible support to mitigate short term power spikes and to improve the energy management. However, achieving coordinated operation is challenged by the tight coupling among electrical railway operation and ESS dispatch under time-varying traction demand and network limits. This paper proposes a two-stage coordinated energy management method for electrified RPSSs that jointly optimizes railway system operation, train trajectories and ESS dispatch while explicitly accounting for traction power flow constraints. First, a day-ahead operation stage determines the train operating profiles and the ESS setting decisions to establish the baseline operating plan. Then, an intra-day rolling optimization stage based on adaptive weight economic-model predictive control (AWC-MPC) updates ESS dispatch under refreshed forecasts of traction demand and renewable output. A real Swedish railway case is utilized to minimize the energy purchase cost and the ESS cost while reducing peak grid power, demonstrating its practical applicability with 35.7% peak grid power demand and 28.8% total system cost reduction.

0.27

Optimizing Train Driving to Minimize the Electricity Cost of an Entire Railway Traffic Mesh using Evolutionary Algorithms

cs.NE physics.app-ph ·2026-08-26 ·Eduardo Pilo de la Fuente, Sudip K. Mazumder, Maria Antonia Simon
published similarity 0.57
Abstract · Will be published in a journal

This paper presents a procedure to optimize the way trains are driven, which pursues, in addition to fulfilling operational constraints such as admissible speeds or journey durations, the minimization of the cost related to supplying electrical energy to the trains, including the cost of the energy consumption and the cost of the power capacity utilization. This procedure combines: (i) a traffic model that merges the energy and power footprint of each rail service part of the traffic mesh, and (ii) an evolutionary computation framework that enables searching for the optimal way to drive the trains to achieve an optimal traffic mesh. This procedure is applied to a 450 km long section of the high-speed line from Madrid to Barcelona (Spain).

0.35

Building Seasonal Highways for Residential Energy Hubs: Sizing, planning and operating thermal energy storage

eess.SY math.OC ·2026-10-01 ·Dario Slaifstein, Mohammad Khosravi, Gautham Ram Chandra Mouli, Laura Ramirez-Elizondo, Pavol Bauer
similarity 0.46
Abstract

The operation of residential energy hubs with multiple energy carriers (electricity, heat, mobility) poses a significant challenge due to the energy storage differences in time-constants, round-trip efficiencies and self-discharge rates. Usually, thermal storage exhibits flexibility in yearly planning optimizations or long-term scenarios. However, as optimization horizons shrink (1-48hs) so does their supplied value due to the lower round-trip efficiencies. To avoid this early depletion during operation this paper proposes a data-driven highway to steer the short-term daily control towards long-term optimality. The proposed methodology also presents how to optimally size the thermal storage and avoid yearly simulations and how all of this is related to nonlinearities in the daily operation. The presented framework links seasonal and daily optimizations through dynamic terminal sets and value functions. The seasonally-aware nonlinear economic model predictive controller achieves the most balanced performance, with the second best mean grid cost of all MPCs at -\texteuro 209. It also achieves better battery degradation control than its linear counterparts (between 26-34%) and the best thermal comfort of the nonlinear benchmarks. Nevertheless, the data-driven seasonal highway restrains the ability to control battery degradation and slightly increases computational time.

0.14

Optimal Demand Response-Based Energy Management for Campus Buildings with Battery Energy Storage Systems: A Case Study of the ELB Building

eess.SY ·2026-10-14 ·Ali Beidoun, Quang Manh Hoang, Guilherme Vieira Hollweg, Van-Hai Bui
similarity 0.45
Abstract · 1-12

Buildings account for a significant portion of global electricity consumption, making demand response (DR) an effective strategy for reducing energy costs and improving grid flexibility. This paper presents an optimal energy management framework for a campus building that integrates demand response and battery energy storage systems (BESS) to minimize electricity costs while satisfying operational constraints and occupant comfort requirements. The proposed optimization model schedules building loads and battery charging/discharging based on time-varying electricity prices and building demand profiles. The framework is validated using the Engineering Laboratory Building (ELB) at the University of Michigan-Dearborn as a real-world case study. Four operating scenarios are investigated: (i) baseline operation, (ii) demand response without battery energy storage, (iii) battery energy storage, and (iv) demand response with battery energy storage. Simulation results demonstrate that demand alone reduces the building's electricity cost by approximately 12% compared with conventional operation. When battery energy storage is incorporated, the total electricity cost reduction increases to approximately 26%, highlighting the significant economic benefits of coordinated demand response and energy storage scheduling. The results demonstrate that integrating battery energy storage with demand response substantially enhances the operational flexibility of campus buildings and provides an effective solution for cost-effective and sustainable building energy management.

0.17

Optimal Day-Ahead Scheduling of Fast EV Charging Station With Multi-Stage Battery Degradation Model

eess.SY ·2026-09-17 ·Y. Wan, D. Gebbran, R. K. Subroto, T. Dragičević
top venuehighly cited similarity 0.45
Abstract

The paper proposes a day-ahead scheduling framework with a novel multi-stage battery degradation modeling method for an electric vehicle (EV) fast charging station (FCS) equipped with a battery energy storage system (BESS). Unlike previous studies, which employ a single battery degradation model to represent the aging process, this paper proposes a novel multi-stage battery degradation modeling method to accurately capture the degradation process across the whole lifespan. Subsequently, the multi-stage model is explicitly integrated into the proposed adaptive optimization framework in a computationally tractable way, thus having important practical implications in the field. The paper provides case studies to demonstrate the effectiveness of the proposed modeling method on a selected cycle aging model in reducing the operation cost of FCS with BESS operating in different stages. As a result, the overall operation cost with the multi-stage model is around 2.1% on average lower than the single-stage model counterpart. In addition, results show that with the increasing number of divided stages, the model error decreases and becomes stable, while the reduced operation cost compared with the single-stage model increases and saturates. Finally, we apply the multi-stage framework considering other conventional degradation models to show the superiority of the proposed method.

0.68

Communication Delay Robust Control of BESS for AI Training Load Smoothing

eess.SY ·2026-09-18 ·Xue Lyu, Wei Du, Sheik Mohammad Mohiuddin, Brett A. Ross
hot direction similarity 0.44
Abstract · 10 pages, 17 figures

AI training loads can exhibit rapid power fluctuations because their power demand differs significantly between computational and communication phases, creating challenging ramp rates at the data center point of common coupling (PCC). Integrating battery energy storage systems (BESS) in data centers is a promising mitigation option. This paper proposes a hybrid BESS control strategy that combines droop-based grid-forming (GFM) control with instantaneous load current-based compensation to suppress high frequency load fluctuations. The GFM control loop regulates the long-term power exchange of the BESS, while the load-following control provides fast compensation for short-term AI workload fluctuations. Communication delay between the load current measurements and the BESS controller is explicitly modeled, and its impact on smoothing performance is analyzed. To mitigate delay-induced degradation, a predictor-based compensation method is incorporated into the BESS control structure. High-fidelity electromagnetic transient simulations are conducted to validate the proposed approach. Results demonstrate effective smoothing of AI training load fluctuations across different grid strength conditions and under time varying communication delays.

0.28

Joint Electricity Price and Load Forecasting for Data Center Battery Dispatch Using Polynomial Diffusion Models

eess.SY ·2026-11-05 ·Matthew Van Ham, Yiping Liu, Xiaozhe Wang
similarity 0.44
Abstract · 5 pages, 5 figures, Power & Energy Society (PES) General Meeting

The rapid growth of large-scale data centers (DCs) is increasing electricity demand, market volatility, and operating costs. Battery energy storage systems (BESSs) can mitigate these challenges by shifting electricity purchases from high-price to low-price periods. This paper proposes a real-time BESS dispatch framework using polynomial diffusion models (PDMs) to forecast both electricity prices and DC loads. Leveraging the closed-form conditional expectations of PDMs, the forecasts are integrated into a dynamic programming (DP) framework to minimize electricity procurement costs. Across the evaluated BESS configurations, the proposed approach achieves 2.63 times the cost savings of a rule-based (RB) strategy.

0.21

Supporting Data Center Grid Integration via Co-Optimized Battery Energy Storage Sizing and Capacity Allocation

eess.SY math.OC ·2026-11-06 ·Wei Wang, Himanshu Sharma, Thiagarajan Ramachandran
similarity 0.44
Abstract

Interconnecting large data centers can be delayed by grid requirements on demand flexibility, ramping limits, and ride-through performance. This paper proposes an optimization-based framework to size a Battery Energy Storage System (BESS) that accelerates data center grid integration by providing BESS capacity required to meet selected flexibility and grid-support requirements. The model co-optimizes BESS power rating and energy capacity while allocating capability across three services: (i) demand response over a specified duration, (ii) mitigation of high-magnitude, high-frequency load fluctuations through reserved active power with zero net state-of-charge change, and (iii) voltage support via reactive power capability at the point of common coupling. Minute-level operational scheduling enforces state-of-charge feasibility and load ramp constraints, and incorporates a controllable queue of delay-insensitive computing tasks to enhance flexibility. A case study using a real data center load profile demonstrates the proposed method and quantifies the BESS power-energy requirements and operational trade-offs needed to satisfy the multi-service constraints, providing practical guidance for interconnection planning and deployment.

0.05