CS Paper Radar

Fast-varying Natural Frequencies and Damping Ratio Identification for Linear Time-Varying System

Melisa Bozaci, Alice Cicirello

cs.LG ·submitted 2026-09-17 12:29 UTC · v1
unusual

Abstract

This work proposes a physics-enhanced machine learning approach for the system identification of Linear Time-Varying (LTV) systems under time-varying operating conditions in terms of fast-varying natural frequencies and damping ratios by combining a long short-term memory network with an Extended Kalman Filter (EKF). The proposed approach uses vibration data (displacement and velocity measurements), domain knowledge of modal damping ratios, and a physics-based model that can yield an approximate natural frequencies time-dependency model. The approach is validated using synthetic data generated from a finite element model of a 2-blade offshore wind turbine under realistic environmental and operating conditions. This system displays fast time-varying frequencies due to operating conditions, whose identification is particularly challenging because of the wind and wave loading. The robustness of the proposed approach is assessed under assumed incorrect system information (e.g. damping ratio). The proposed approach is evaluated across different environmental and operating conditions to show its applicability to different operating regimes. The results show the approach can accurately identify the selected fast-varying natural frequency, 1st Fore-Aft (FA-1) mode, with a maximum root mean square error of 0.0012 Hz. The results demonstrate that the model trained on EKF estimates depends on accurate damping values, whereas the model trained on physics-based data exhibits robustness to incorrect damping assumptions. The approach is extended to damping ratio identification for the selected mode by estimating the root mean square error between models trained on EKF estimates and physics-based data. The results show that the approach can yield a good approximation of the FA-1 mode damping ratio using grid search, offering an improvement over covariance-driven stochastic subspace identification.

Comment
Preprint submitted to Mechanical Systems and Signal Processing

Closest papers

Nearest neighbours by meaning across the whole index.

Model Predictive Control of Wind Turbines: A Model-Oriented Review of Prediction Models, Control Objectives, and Nonlinear Aerodynamic Formulations

eess.SY math.DSmath.OC ·2026-10-22 ·Roya Khalili-Amirabadi, Mohsen Jalaeian-Farimani, Mahdi Ghane
published similarity 0.57
Abstract · Khalili-Amirabadi, R., Jalaeian-Farimani, M., & Ghane, M. (2026). Model Predictive Control of Wind Turbines: A Model-Oriented Review of Pred…

Model predictive control (MPC) has been applied to wind-turbine regulation with markedly different internal prediction models, ranging from linearized low-order turbine models to nonlinear, aeroelastic, floating, and data-driven predictors. This review organizes the literature primarily by the model propagated by the controller and treats model order, predictor representation, MPC formulation, control objective, and validation plant as separate descriptors. Primary studies show that low-order linear or piecewise-affine predictors are attractive for constrained power and speed regulation, whereas flexible drivetrain, structural, and floating models are needed when drivetrain twist, tower motion, blade loads, or platform dynamics are explicit control quantities. Nonlinear and economic MPC studies further demonstrate coordinated pitch/torque control across broad operating regions, while preview, repetitive, and data-driven formulations address wind prediction, periodic loads, and model mismatch. Particular attention is given to aerodynamic pitch dependence: variable-pitch turbine dynamics can be non-affine with respect to applied pitch, and the term NMPC alone does not prove that the original nonlinear pitch map is retained inside the optimizer. The review therefore adopts a conservative, equation-based classification for direct nonlinear applied-pitch propagation. Here, direct nonlinear applied-pitch propagation means that the applied pitch at each prediction step is evaluated inside the original nonlinear aerodynamic map, rather than replacing that dependence by a linearized, scheduled, piecewise-affine, or learned surrogate. The literature supports a remaining integration challenge at the intersection of flexible drivetrain prediction, nonlinear aerodynamic pitch treatment, explicit constraints and load objectives, and validated adaptive or learned model correction.

0.35

Data-Driven Surrogate-Model for Real-Time Loads Prediction in Floating Wind Farms

eess.SY ·2026-10-13 ·Federico Bellini, Majid Ebrahimi, Alessandro Fontanella, Marcus Becker, Jan-Willem Van Wingerden +2 more
similarity 0.57
Abstract

This work presents a data-driven load-surrogate modelling framework for real-time control of floating offshore wind farms. The proposed methodology uses mid-fidelity simulations performed with OpenFAST and FAST.Farm together with MLife fatigue analysis to generate Damage Equivalent Load (DEL) datasets of floating wind turbines under wake steering conditions. A two-stage surrogate modelling approach is adopted: first, a Feed-Forward Neural Network (FFNN) is trained using data from simulations of a single floating wind turbine, while a second stage corrects the residual error between the FFNN predictions and FAST.Farm simulations using either Gaussian Process Regression (GPR) or an additional FFNN. The results show that the proposed framework can estimate DELs with errors generally below 15% for tower base bending moment, blade root bending moment, yaw bearing moment, and fairlead tension, while maintaining computational times compatible with real-time applications. The study also highlights the challenges related to generalization of the load-surrogate model under varying environmental and control conditions, especially for large floating wind farms. Overall, the proposed methodology demonstrates the potential of surrogate-based DEL estimation for load-aware floating wind farm control applications.

0.19

A Harmonic-Regression ARMA model for rotating machinery dynamics identification and fault detection under varying conditions

eess.SP ·2026-09-23 ·Dimitrios M. Bourdalos, John S. Sakellariou, Spilios D. Fassois
published similarity 0.57
Abstract · Accepted for publication in the Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2026), Leuven, Belgium,…

Fault detection in rotating machinery under varying operating conditions remains a challenging problem. Existing approaches are mainly based either on non-parametric vibration signal representations, parametric deep learning models, or on parametric ARMA-type models. While deep learning approaches often lack transparency and require large training datasets, ARMA-type models rely on the assumption of a purely rational spectrum, which can be restrictive for rotating machinery vibration signals exhibiting mixed spectral characteristics. To address these limitations, a novel Harmonic Regression ARMA (HR-ARMA) model is presented for rotating machinery dynamics identification, which combines an explicit harmonic regression part for representing the dominant deterministic cyclical components with an ARMA part for the remaining broadband stochastic dynamics. Based on this model and within a Multiple Model framework, fault detection is achieved under varying operating conditions. The HR-ARMA modelling performance is validated through simulation and experimental studies on a single-stage gearbox, demonstrating accurate representation of both cyclical and broadband dynamics, improved parsimony and significantly higher fault detection performance compared with conventional ARMA models, achieving at least 98% True Positive Rate at 5% False Positive Rate in the experimental study.

0.39

Adaptive Model Predictive Control for Damping IBR-Induced SSOs

eess.SY ·2026-11-11 ·Fiaz Hossain, Nilanjan Ray Chaudhuri, Constantino M. Lagoa
similarity 0.56
Abstract

We propose an adaptive model predictive control (MPC) approach to damp sub-synchronous oscillations (SSOs) induced by grid-following (GFL) inverter-based resources (IBRs). Unlike traditional model predictive controller designed considering the nominal plant that may not perform well in other conditions, we use plants that alter with changing operating point. To capture the plant dynamics, we use recursive least squares (RLS) based system identification with variable forgetting factor. This approach allows us to discount past data and avoid bias caused by large transient outliers while performing system identification. We present a proof of the convergence of the model parameters in the presence of finite outliers. We propose to update the model inside the MPC optimization problem periodically after a predetermined time interval instead of each sampling instant since the operating point changes slowly in a practical power system. The MPC design allows us to directly impose constraints on control inputs so that the IBR current limits are respected. Our approach also addresses the issue of unavailability of IBR models. We show the accuracy of the system identification and the superior performance of the proposed controller on the modified IEEE $4$-machine system and the modified IEEE $68$-bus system as compared with the traditional MPC.

0.38

Modelling non-linear aeroelastic loads in long-span bridges with extreme learning machines

cs.CE cs.LG ·2026-09-27 ·Gledson Rodrigo Tondo, Samir Chawdhury, Sergio Andres Castro Giraldo, Guido Morgenthal
publishedcode/data similarity 0.54
Abstract

Accurate modelling of aerodynamic loads is essential for predicting instabilities and ensuring the safety of long-span bridges. A methodology is introduced for modelling aerodynamic self-excited forces in bridge-deck cross-sections using extreme learning machines (ELMs). ELMs, as single-layer feedforward neural networks, offer efficient training and accurate predictions. Forced-oscillation datasets from computational fluid dynamics (CFD) or wind-tunnel experiments are used for training, enabling systematic data selection to capture non-linear aerodynamic behaviour often missed by semi-analytical approaches. Once trained, the model predicts self-excited loads for any arbitrary motion composed by frequencies and amplitudes within the training domain. Comparisons with analytical, semi-analytical, and CFD results show superior accuracy in capturing non-linear force components and close agreement for aerodynamic loads and flutter wind speeds. Training required about 1.1\% of the time of a conventional neural network, and coupled flutter analysis runs in seconds, providing orders-of-magnitude speed-ups over CFD. These results indicate that ELM-based frameworks are accurate, practical, and efficient alternatives for modelling self-excited loads, particularly when preliminary CFD or wind-tunnel data are available. The presented approach offers a reliable data-driven technique for aeroelastic load modelling in long-span bridges.

0.30

Mitigating Forced Oscillations in Power Systems via Data-Enabled Predictive Control

eess.SY ·2026-08-27 ·Soraya Daabak, Verena Häberle, Gabriela Hug, Gustavo Valverde
similarity 0.53
Abstract

Sustained forced oscillations in power systems, driven by large cyclic loads such as data centers, pose a challenge to conventional power system stabilizers (PSSs), which rely on fixed tuned parameters and limited adaptability. This paper investigates the use of Data-Enabled Predictive Control (DeePC) as a data-driven alternative for damping such oscillations. DeePC constructs control actions directly from measured trajectories without requiring an explicit system model, enabling adaptation to changing operating conditions. We evaluate the performance of DeePC on a multi-machine two-area system subject to forced oscillations and compare it against a conventional PSS. The study examines the impact of different input-output configurations and the role of representative historical data in the Hankel matrix construction. Results show that DeePC can achieve superior damping. However, its effectiveness depends critically on the quality and representativeness of the underlying dataset. These findings highlight the potential of data-driven predictive control to complement or outperform conventional stabilizers in modern power systems with evolving and uncertain dynamics.

0.24

Beyond Scalar Inertia: Frequency-Response-Based Assessment of Finite-Duration Inertial Support in Grid-Forming Converters

eess.SY ·2026-11-13 ·Ziqi Zhou, Mahdieh S. Sadabadi, Sante Pugliese, Xiaoqiang Li, Xiaojie Wu +1 more
hot direction similarity 0.52
Abstract · This paper has 6 pages with 5 figures. The target journal will be determined at a later stage

Conventional scalar inertia characterizes only the low-frequency terminal behavior of grid-forming converters (GFMs) and cannot fully predict inertial energy delivery during short-duration frequency disturbances. This letter proposes a frequency-response-based method to assess finite-duration inertial support using complex terminal power--frequency responses, such as those provided by Network Frequency Perturbation (NFP) plots. For GFMs with nonzero steady-state droop, a duration-dependent energy-equivalent inertia is defined after subtracting the ideal static-droop contribution. An exact spectral relationship is established, expressing this metric as a duration-weighted integral of frequency-dependent inertia, without requiring knowledge of the internal controller structure and parameters. The duration dependence of the metric is further shown to encode observable oscillation frequencies and damping ratios. A coefficient-decoupling GFM control with identical scalar inertia and droop across different settings is used for verification.

0.34

Control of hybrid wind-wave energy systems using reinforcement learning

eess.SY ·2026-08-11 ·Zechuan Lin, Kemeng Chen, Maosen Fan, Xiaofan Li, Xi Xiao +1 more
similarity 0.52
Abstract

Integrating wave energy converters (WECs) with floating offshore wind turbines (FOWTs), to form hybrid wind-wave energy (HWWE) systems, is a promising approach to achieve further cost reduction for offshore renewable energy. In such systems, the control of the integrated WECs plays an important role, with the potential to generate additional wave energy while simultaneously suppressing floating platform motion. However, HWWE systems are characterized by complex dynamics, making accurate modelling only viable through numerical simulation, and posing significant challenges for control design. This paper proposes a reinforcement learning (RL) control framework for HWWE systems, in which the real-time control policy is learned directly through interactions with high-fidelity simulation. A numerical model is established for a HWWE system consisting of an IEA 15 MW wind turbine, a VolturnUS semi-submersible platform, and three torus-type WECs, which is then employed as the RL training environment. Control performance is evaluated in terms of both wave energy generation and platform motion reduction, two competing objectives, from a Pareto perspective. It is shown that the proposed RL controller achieves substantial Pareto improvements over conventional control strategies, e.g., over 75\% higher wave energy capture at the same platform motion level, or nearly 50\% lower motion at the same energy capture level, thereby significantly extending the attainable performance boundary of HWWE systems.

0.04