CS Paper Radar

A Unified Dynamic Force Guidance Framework for Performance-Optimized Kinesthetic Teaching

Chunxin Li, Jianhua Wu, Zhenhua Xiong, Xiangyang Zhu

cs.RO ·submitted 2026-09-18 07:26 UTC · v1

Abstract

Collaborative robots are increasingly deployed in industrial scenarios characterized by frequent product changeovers. As an intuitive programming method, kinesthetic teaching facilitates rapid robot deployment. However, users may overlook the configuration of the robot during kinesthetic teaching, leading to degradation in operational performance. Operational performance refers to the capability of the robot to generate motion and can be quantified by the Minimum Singular Value of the Jacobian matrix. To address this issue, this paper proposes an online dynamic force guidance method that integrates performance constraint and optimization mechanisms. Specifically, variable admittance control maintains the operational performance of the robot above a predefined threshold, while a virtual force actively guides the user to drag the robot towards configurations with improved performance. Experiments are conducted on a 6-DOF collaborative robot, comparing three typical paths in the task space. To evaluate the quality of the taught trajectories, trajectory playback experiments are conducted to analyze the relationship between the operational performance of the robot and the work efficiency. The results demonstrate that the proposed method effectively enhances the operational performance of the robot and consequently improves the work efficiency, holding significant value for reducing production takt time in industrial deployment.

Closest papers

Nearest neighbours by meaning across the whole index.

PAKT: Physically-Aligned Kinesthetic Teaching for Reinforcement Learning

cs.RO ·2026-09-22 ·Lars Johannsmeier, Yashraj Narang
similarity 0.65
Abstract · 17 pages, 6 figures, 9 tables, Conference on Robot Learning

Real-world reinforcement learning (RL) systems still struggle with the demands of contact-rich industrial manipulation, including micrometer-level precision, success rates above 99%, and human-level cycle times. Although off-policy algorithms can improve performance by leveraging demonstrations and interventions, a key bottleneck is the lack of an intuitive interface for collecting such guidance while complying with constraints of the physical system and the policy. We propose PAKT, a framework for kinesthetic teaching in RL. As opposed to teleoperation approaches, PAKT relies on kinesthetic guidance, which is widely used in industry. However, a critical weakness of kinesthetic guidance is the possibility for the operator to move the robot along trajectories (e.g., velocities, accelerations, jerk) that the robot and/or policy cannot physically reproduce. Using PAKT, operators guide the robot through admittance control, which maps human-applied forces to motion. The downstream reference generator applies the same kinematic limits used during policy execution, keeping the collected trajectories within these limits. To support this teaching interface with an appropriate execution layer, PAKT adds a high-performance control stack that maps low-frequency RL actions to high-frequency torque commands. It consists of a reference generator and subsequent impedance controller, where the reference generator preserves the tracking performance of the impedance controller while improving contact handling and producing smoother policy actions. Across the reported runs on four insertion and industrial assembly benchmarks, including a data center compute tray, the end-to-end system reduces cycle time by 23%-48% and cumulative intervention count by 62%-86% relative to the HIL-SERL baseline. Project website: https://pakt-website.github.io/pakt-website}{https://pakt-website.github.io/pakt-website

0.37

Enabling Scalable Kinesthetic Teaching via Observer-based Hand-guiding with Active Support

cs.RO ·2026-08-11 ·Anna Tuma, Giuseppe Monetti, Jochen J. Steil, Niels Dehio
published similarity 0.62
Abstract

Kinesthetic teaching through robot hand-guiding provides a natural interface for collecting demonstrations in imitation learning and programming-by-demonstration. However, extended sessions cause operator fatigue, reducing demonstration quality and limiting scalability. Current industrial hand-guiding approaches typically provide no active assistance, and alternatives require costly wrist-mounted force-torque sensors or rely on learned motion priors unavailable for new tasks. We propose RHOAS, a hand-guiding scheme that actively supports operator-intended motions using model-based force estimation without additional hardware. Our approach considers robot hand-guiding as an actively controlled interaction by the human operator, rather than an interaction with a passive environment. Standard methods used for hand-guiding typically rely on general passivity-based compliant control architectures that unnecessarily increase operator effort and limit the range of demonstrable motions without providing the intended stability guarantees in active interaction. Instead, our design utilizes model-based external torque estimation, internal joint torque sensing, and redundant robot kinematics to actively support human physical input within the human interaction frequency bandwidth. We address practical challenges of relying on observer-based force estimation, including suppression of unmodeled joint elastic dynamic effects and measurement noise in the feedback path, reduced estimate accuracy close to kinematic singularities, and static gravity compensation errors. In a user study with 16 participants on a KUKA LWR iiwa we demonstrate statistically significant reductions in physical effort, improved maneuverability for both precise and agile tasks, and clear user preference.

0.23

RoboCompiler: Graph-Native Compilation of Closed-Chain Robots for Consistent Modeling, Control, and Simulation

cs.RO ·2026-09-28 ·Mehdi Heydari Shahna, Joongheon Kim, Jouni Mattila
code/data similarity 0.61
Abstract · GitHub: https://github.com/Mehdi-Heydari-Shahna/RoboCompiler

Robots with kinematic loops, coupled actuators, and changing contacts require consistent models of configuration, motion, force, and dynamics. Yet these interfaces are often reconstructed separately for control and simulation, making closure and actuation consistency difficult to maintain. This paper presents RoboCompiler, a graph-native framework that compiles a canonical mechanism graph into a shared mechanical interface. From bodies, joints, frames, inertias, and actuator ports, it constructs closure paths and analytic residual Jacobians, then assembles feasible configurations through rank-checked continuation and correction. A tangent lift maps independent velocities to full robot and task motion, while paired actuator-port maps preserve virtual work. A constraint-curvature correction extends the reduction to accelerations and projected rigid-body dynamics, including floating-base and support modes. Cycle-local evaluation, generated Jacobians, and dependency-aware reuse enable localized updates when closure inputs change. We evaluate physical loops and task-induced constraints on a industrial excavator, Unitree Go2, Franka Panda, Kangaroo, and a six-UPS Stewart platform. High-precision constrained-dynamics and independent Pinocchio checks confirm mechanical consistency; MuJoCo and Isaac Sim/PhysX executions demonstrate task performance and model reuse under native contact. For Kangaroo, compilation reduces residual-and-Jacobian evaluation time by 96.7% and closed-loop rollout wall time by 66.8%, with dynamics and control held fixed.

0.53

Energy-Regularized Imitation Learning for Force- and Work-Aware Robotic Manipulation

cs.RO cs.CV ·2026-09-16 ·Toshiki Otani, Hiromu Taketsugu, Norimichi Ukita
published similarity 0.61
Abstract · ECCV 2026 Workshop on Force-Grounded, Cross-View Articulated Manipulation

This paper studies energy-aware manipulation as a physically grounded learning problem. We define a joint-space mechanical-work proxy from joint torque and angular displacement, and train a differentiable energy predictor that estimates this work from robot states and actions. The predictor converts a non-differentiable simulator-side physical quantity into a differentiable regularizer for fine-tuning a pretrained manipulation policy. We instantiate the framework with RVT-2 on RLBench and evaluate 12 manipulation tasks involving object contact, articulated motion, placement, pushing, and sweeping. The proposed fine-tuning reduces the average mechanical work from 208.8J to 204.4J (i.e., 2.1% reduction), while the mean task success rate also increases slightly from 86.2% to 86.9%. These results show that work-aware policy optimization can suppress physically inefficient motion without requiring an explicit differentiable dynamics model.

0.34

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.60
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24

LIBERO-Industry: Benchmarking Robotic Manipulation under Industrial Process Constraints

cs.AI ·2026-10-12 ·Ming Shin Cindy Sung, Duan Leijiahao, Haoxiang Wang, Boning Tan, Liangna Fu +7 more
benchmark similarity 0.60
Abstract · 38 pages, 14 figures, 20 tables, including appendices. Project website: https://IAIE-PhysicalAI.github.io/LIBERO-Industry/

Industrial manipulation in flexible manufacturing, e.g., high-mix, low-volume (HMLV) electronics assembly, requires robot policies to adapt to changing products and production conditions. Such settings impose industrial process constraints, including product variants, moving material flows, finite execution windows, and tight geometric tolerances. However, existing evaluation frameworks do not systematically capture these constraints when assessing generalist robot policies. To address this gap, we introduce LIBERO-Industry, a novel benchmark built on the widely used robot learning benchmark LIBERO, that translates the aforementioned industrial constraints into controllable task conditions and measurable success criteria. Specifically, LIBERO-Industry comprises three classic task scenarios: Static-to-Dynamic (S2D) loading, Dynamic-to-Static (D2S) unloading, and Dynamic-to-Dynamic (D2D) transfer. The suites contain 216 tasks in total that systematically vary object geometry, conveyor speed, interaction-window duration, and geometric acceptance region size. Extensive experiments across five generalist robot policies (including vision-language-action models and world-action models) show that performance progressively degrades as industrial constraints are introduced and combined. Under a shared fine-tuning and evaluation protocol, the LIBERO-Industry co-training condition achieved higher observed target-transfer completion than the original-LIBERO condition.

0.35

Differentiable Iterative Learning Control for Black-Box Position-Commanded Manipulators

cs.RO eess.SY ·2026-10-31 ·Mohammed Al-Ghaili, Yakoop Qasim, Hassan Almubarak
similarity 0.60
Abstract

High-accuracy repetitive tracking is challenging for position-commanded manipulators whose low-level controllers are inaccessible, while constrained model-based iterative learning control (ILC) can require substantial manual parameter tuning. We present Differentiable Iterative Learning Control (Diff-ILC), an online bilevel framework that adapts the parameters of a constrained ILC update between physical robot executions. A closed-loop differential model is identified once from paired smooth perturbations and subsequently kept fixed. At each trial, a constrained quadratic program computes a feasible command correction, while a real-anchored next-trial prediction defines a task-level objective. Hypergradients are obtained by implicitly differentiating the locally active KKT system, enabling multiple computational parameter updates without additional robot executions. Experiments on a 6-DoF DOBOT CR3 across unseen planar and three-dimensional trajectories show substantially faster physical-trial convergence than fixed-parameter model-based ILC. Across the four primary trajectories, after only two trial-to-trial updates, Diff-ILC achieves 78.8% and 76.4% lower mean joint-vector and Cartesian RMSE, respectively, than fixed-parameter model-based ILC.

0.19

FORTE: Task-Adaptive Force Capability Optimization for Mobile Manipulators

cs.RO ·2026-09-18 ·Xiao Wang, Heng Zhang, Gokhan Solak, Fei Zhao, Arash Ajoudani
code/data similarity 0.59
Abstract

Effective physical interaction control in robotic manipulation requires not only kinematically feasible motion but also sufficient force-interaction capability. Existing redundancy resolution methods often ignore task-specific force demands or maximize the force capability indiscriminately, sacrificing dexterity when large force margins are unnecessary. We propose a task-oriented force capability optimization framework for redundant mobile manipulators. A Vision-Language Model (VLM) infers object physical properties from an RGB image and a task description, generating a desired task-force sequence that captures gravitational and inertial demands. We then define a task-oriented force capability metric as the signed distance between a task-force uncertainty ball and the dynamic residual force polytope (RFP), quantifying compatibility between task demands and the robot's remaining actuation capacity. This metric is incorporated, alongside manipulability, joint-limit avoidance, trajectory smoothness, and base-oscillation suppression, into a whole-body multi-objective trajectory-optimization problem. Experiments on a mobile manipulator performing lifting and single-point-holding tasks under varying payload conditions demonstrate that the proposed method provides sufficient force capability for heavy loads while preserving high manipulability for light loads. This yields a task-adaptive balance that fixed capability-maximizing baselines (RFP inscribed radius, RFP cone) and manipulability-only optimization fail to achieve. The core implementation is publicly available at https://github.com/yeying256/FORTE.

0.42