CS Paper Radar

Prescribed-Time Contracting-Boundary Control of a Tendon-Driven Flexible Arm

Yi Lu, Chao Tang, Zhiji Han, Hongdu Wang

cs.RO ·submitted 2026-09-19 11:28 UTC · v3

Abstract

This study develops a prescribed-time performance-shaping control method for curvature tracking of a single-segment flexible arm actuated by three antagonistic tendon pairs. A Cartesian curvature representation is introduced to avoid the undefined bending direction at the straight configuration and to establish an explicit six-tendon kinematic mapping. A cubic performance boundary contracts smoothly from an initially admissible error bound to a nonzero terminal accuracy bound within a prescribed time. Based on this boundary, a dual transformation combining static symmetric error scaling and time-varying behavior shaping maps the tracking error into a fixed unit box. The resulting controller guarantees boundary invariance, prescribed-time entry into the terminal accuracy region, and subsequent asymptotic convergence. Numerical evaluations with Python and OpenCR--MuJoCo, together with a supervised reduced-order experiment on a two-section, four-channel platform, provide complementary validation. Across six experimental trials, no violation of the prescribed boundary is observed, and the proposed controller reduces the mean terminal curvature RMSE by 32.5% relative to a matched baseline, with comparable terminal-band entry times. These results support the feasibility of the proposed approach in the reduced-order experimental setting.

Closest papers

Nearest neighbours by meaning across the whole index.

Flexibility-Aware Robotic Manipulation: Deformation Estimation, Kinematics, and Control via Distributed Inertial Measurement

cs.RO ·2026-10-30 ·Amir Hossein Barjini, Sadeq Yaqubi, Pauli Mustalahti, Jouni Mattila
similarity 0.63
Abstract

Flexible robot links challenge the rigid-body assumption, making joint measurements alone insufficient for accurate manipulation. This paper introduces a flexibility-aware manipulation framework that connects structural dynamics directly to sensing, kinematics, and control. Instead of prescribing a dense inertial measurement unit (IMU) network, the dominant vibration modes of each flexible link are first identified from response-convergence and excitation-bandwidth criteria. Under a full-rank modal observability condition, $m$ retained modes require only $m$ independent slope measurements and one reference IMU, defining the minimum observable IMU configuration. The resulting measurements are used to reconstruct the continuous link deformation, which is then incorporated into flexibility-aware forward kinematics and a deformation-informed partial differential equation-based controller. Experiments on hydraulic single- and double-link manipulators evaluate the framework. On the long-reach double-link platform, the proposed kinematics achieves end-effector root mean square errors of $0.0107$~m, $0.0194$~m, and $0.0102$~rad while using fewer sensors than the piecewise-rigid method. Closed-loop reaching experiments further demonstrate real-time integration of IMU-estimated joint states and reconstructed deformation into the proposed controller. The results show that dominant modal information can determine sensing requirements and enable real-time flexibility-aware robotic manipulation.

0.34

Actuation and Control of Passive Tendon-Driven Soft Extensions Through Rigid Manipulator Motion

cs.RO ·2026-11-11 ·Ignacio Cuiral-Zueco, Gonzalo López-Nicolás, Youcef Mezouar
theorycode/data similarity 0.61
Abstract · 16 pages, 12 figures. Soon to be submitted to the IEEE Transactions on Robotics. Code: https://github.com/nachocz/passive_soft_extension_con…

Industrial manipulators offer reach and precision but can damage nearby structures in confined spaces. Soft robots provide compliant contact but typically have limited reach. Rigid-soft systems combine their advantages, although they often require dedicated actuation and control hardware. We propose actuating a passive tendon-driven soft extension through manipulator joint motion. As the robot moves, the exterior spans of tendons anchored to upstream links change, altering tendon tension and deforming the extension. Inspection through narrow apertures, for example, constrains the motion of the end effector (EE). We develop a controller that regulates the soft tip while preserving such EE constraints. A differential model separates rigid transport from soft deformation, combining analytic arm and tendon kinematics with a locally identified span-to-deformation map. We also derive a local upper bound on the number of independent deformation directions transmitted by the tendons under the EE constraint, and conditions for the exponential convergence of the tip error. A quadratic program with control barrier functions imposes obstacle clearance, fulcrum limits, and model-validity conditions. Simulations and real experiments show tip and shape regulation under free, position-constrained, and fulcrum-constrained EE motion.

0.42

Curvature by Design: A Support Structure for Continuum Robots

cs.RO ·2026-11-04 ·Justus Sagemüller, Harald Minde Hansen, Kristin Y. Pettersen
similarity 0.61
Abstract

Constant- and piecewise-constant-curvature models are widely used to simplify the kinematics of continuum robots, although the assumed curvature profiles are not necessarily inherent mechanical properties of the robot and may therefore be violated during operation. Rather than assuming a prescribed curvature profile in the kinematic model and estimating deviations from it, this paper presents a multi-segment scissor-based support structure that mechanically constrains a continuum robot to exhibit prescribed constant or spatially varying curvature profiles. The design uses Taylor approximations to enable an overconstrained multi-joint linkage to predictably distribute global bending among the small-angle movements of multiple flexures. The geometric coupling is realized using compliant flexure joints, enabling the support structure to be manufactured as a single piece. The structure is integrated with a tendon-actuated continuum robot with a flexible backbone. Experiments show that the structure makes the robot resistant to deformations other than the prescribed curvature, significantly enhancing shape precision compared to classical flexible-backbone designs. This constrains the robot from making S-shapes when external loads are applied in the opposite direction of the bending. By mechanically constraining the admissible deformation, the proposed structure reduces the number of independent shape variables that must be estimated.

0.11

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

cs.RO eess.SY ·2026-09-02 ·Jiahe Wang, Eron Ristich, Sultan Haidar Ali, Eric weissman, Lei Zhang +3 more
similarity 0.59
Abstract · 18 pages, 14 figures, submitted to TRO

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

0.35

Reduced Cartesian Kinetostatics for Tendon-Driven Continuum Robots: Residual-Stabilized Full-Shape Propagation

cs.RO ·2026-09-24 ·Ke Wu, Fangju Yang, Xiaohui Zhang, Zhengqiang Zhang, Jingang Yi +1 more
hot direction similarity 0.58
Abstract

Many planning and control tasks for tendon-driven continuum robots (TDCRs) require the complete Cartesian backbone geometry. We present a reduced Cartesian framework for planar, axially compressible TDCRs that propagates equilibrium configurations along prescribed tendon-force and tendon-displacement trajectories. The backbone is represented by two global position fields. Following exact variation, a Taylor-Galerkin reduction condenses prescribed spatial properties and distributed loads into offline moment vectors, yielding analytic reduced residuals and Jacobians without online spatial quadrature or numerical differentiation. Analytical differentiation and residual correction yield first-order rate systems requiring one fixed-dimensional linear solve per rate evaluation after initial equilibrium alignment on a regular branch. Across four simulated cases covering variable tendon routing, nonuniform geometry, axial compression, and their combined effects, the propagated Cartesian shapes and distributed strains closely match pointwise geometrically variable-strain (GVS) equilibrium solutions. Residual correction suppresses propagation drift across the tested step sizes while adding only about 0.98% to the mean update time of uncorrected Euler. The proposed method requires 0.508 ms per update on average, approximately 11 times faster than pointwise GVS solves. Displacement-driven experiments yield a maximum normalized mean backbone position error of 1.02% and a maximum end-effector position error of 0.28%. These results support efficient and accurate Cartesian full-shape prediction along prescribed actuation paths.

0.30

Dynamic Shape Control of Soft Trunk Robots

cs.RO ·2026-11-04 ·Hehui Zheng, Marc Stampanoni, Roshan S. Kaundinya, Ronan Hinchet, George Haller +1 more
similarity 0.57
Abstract

Controlling the shape profile of soft trunk robots extends their reach into complex regions of the workspace and enhances their use in practical applications. Recent advances in soft robot design have enabled soft trunk robots to achieve greater flexibility in conforming to complex shapes. Specifically, trunk robots whose geometries are designed as helicoids have been shown to enable extreme shape-changing capabilities. Their compliance makes them highly nonlinear, which in turn makes shape control difficult. On similar tendon-driven trunk robots, model-based controllers based on the theory of adiabatic spectral submanifolds (aSSMs) have achieved high accuracy in closed-loop end-effector tracking. We extend this approach by learning an aSSM model of the full body of a trimmed-helicoid soft trunk robot from data and use this in a model predictive control (MPC) scheme to demonstrate a range of shape control tasks on hardware. On closed-loop dynamic shape regulation, our method outperforms the available linear baselines by a factor of 10. In human-in-the-loop interactive demos, our method completes section-by-section shaping and balances a tennis ball for over 25 seconds, while the linear baselines fall short. A model-free reinforcement learning policy trained for 12 hours on hardware fails on the same balancing task. These results establish aSSM-based MPC as a practical route to full-body shape control on real soft hardware.

0.21

Time-Optimal Control of One-Mode Flexible Structures: Analytical Solution and the Cost of Flexibility

eess.SY math.OC ·2026-08-11 ·Manuel Keppler
similarity 0.57
Abstract

The time-optimal solution for a double integrator is a foundational result: its time-displacement law $T_r = 2\sqrt{L}$ for a normalized step $L$ is structure that numerical methods cannot provide. We solve the time-optimal control for rest-to-rest maneuvers of a double integrator coupled to a harmonic oscillator, deriving the first analytical solution and closed-form time-displacement law. Synthesis reduces to a single scalar inversion. This is the model to which the two-mass-spring system, the one-bending-mode flexible structure, and the linearized overhead crane reduce. A Pythagorean identity $T^2 = T_r^2 + 2T_s^2$ decomposes the optimal maneuver time into the rigid-body minimum and a synchronization time $T_s \leq π$, the cost of flexibility, giving the sharp envelope $2\sqrt{L} \leq T \leq 2\sqrt{L + π^2/2}$. The penalty is scale-dependent. For small maneuvers $T \propto L^{1/4}$: one oscillator mode costs as much as two additional integrators. For large ones, flexibility is asymptotically free. It vanishes at the natural motions, where the oscillator completes whole cycles. A closed-form sensitivity formula proves the maneuver time non-monotone in stiffness. Adding flexibility to a rigid body never shortens a maneuver, yet softening an already flexible structure can: stiffer is not always faster. The natural motions are robust design targets since first-order sensitivity to stiffness vanishes there.

0.04

PACT: Pose-Robust Actuation Co-Design for Tendon-Driven Robotic Hands

cs.RO ·2026-11-03 ·Prashant Kumar, Rachael Granberry, Taylor Niehues, Andrew A. Stanley, Gabe Pirie
similarity 0.57
Abstract

Humanoid robotic hands must provide sufficient force, speed, and backdrivability within a human-scale envelope. Tendon-driven transmissions address this challenge by relocating actuators to the palm and forearm, but routing paths, moment arms, and capstan dimensions jointly determine both force capability and joint speed, so selecting them sequentially satisfies one requirement at the expense of the other. This paper presents a pose-robust actuation co-design for tendon-driven robot hands (PACT) framework that optimizes tendon routing, moment arms, and capstan dimensions under pose-dependent force requirements and drivetrain-bandwidth constraints. A feasible-force formulation enforces actuator bounds and equilibrium at all joints, while a max-min objective maximizes task-force coverage at the weakest pose. Applied to a four-degree-of-freedom finger, the framework produces an asymmetric N + 1 tendon topology using quasi-direct-drive actuators. Across eight poses, the design achieves task-force coverage of 0.88-1.00 and a predicted 5 Hz minimum isolated-joint flexion/extension bandwidth within a 70th-percentile human-size envelope. Prototype measurements deviate from predictions by up to 24.5%, primarily due to unmodeled transmission losses. These results indicate that co-designing routing with the drivetrain can meet pose-dependent force requirements without relaxing the bandwidth constraint, paving the way for human-sized robotic hands with human-level performance.

0.08