CS Paper Radar

Time-Optimal Control of One-Mode Flexible Structures: Analytical Solution and the Cost of Flexibility

Manuel Keppler

eess.SY math.OC ·submitted 2026-08-11 19:12 UTC · v1

Abstract

The time-optimal solution for a double integrator is a foundational result: its time-displacement law $T_r = 2\sqrt{L}$ for a normalized step $L$ is structure that numerical methods cannot provide. We solve the time-optimal control for rest-to-rest maneuvers of a double integrator coupled to a harmonic oscillator, deriving the first analytical solution and closed-form time-displacement law. Synthesis reduces to a single scalar inversion. This is the model to which the two-mass-spring system, the one-bending-mode flexible structure, and the linearized overhead crane reduce. A Pythagorean identity $T^2 = T_r^2 + 2T_s^2$ decomposes the optimal maneuver time into the rigid-body minimum and a synchronization time $T_s \leq π$, the cost of flexibility, giving the sharp envelope $2\sqrt{L} \leq T \leq 2\sqrt{L + π^2/2}$. The penalty is scale-dependent. For small maneuvers $T \propto L^{1/4}$: one oscillator mode costs as much as two additional integrators. For large ones, flexibility is asymptotically free. It vanishes at the natural motions, where the oscillator completes whole cycles. A closed-form sensitivity formula proves the maneuver time non-monotone in stiffness. Adding flexibility to a rigid body never shortens a maneuver, yet softening an already flexible structure can: stiffer is not always faster. The natural motions are robust design targets since first-order sensitivity to stiffness vanishes there.

Closest papers

Nearest neighbours by meaning across the whole index.

Prescribed-Time Contracting-Boundary Control of a Tendon-Driven Flexible Arm

cs.RO ·2026-09-19 ·Yi Lu, Chao Tang, Zhiji Han, Hongdu Wang
similarity 0.57
Abstract

This study develops a prescribed-time performance-shaping control method for curvature tracking of a single-segment flexible arm actuated by three antagonistic tendon pairs. A Cartesian curvature representation is introduced to avoid the undefined bending direction at the straight configuration and to establish an explicit six-tendon kinematic mapping. A cubic performance boundary contracts smoothly from an initially admissible error bound to a nonzero terminal accuracy bound within a prescribed time. Based on this boundary, a dual transformation combining static symmetric error scaling and time-varying behavior shaping maps the tracking error into a fixed unit box. The resulting controller guarantees boundary invariance, prescribed-time entry into the terminal accuracy region, and subsequent asymptotic convergence. Numerical evaluations with Python and OpenCR--MuJoCo, together with a supervised reduced-order experiment on a two-section, four-channel platform, provide complementary validation. Across six experimental trials, no violation of the prescribed boundary is observed, and the proposed controller reduces the mean terminal curvature RMSE by 32.5% relative to a matched baseline, with comparable terminal-band entry times. These results support the feasibility of the proposed approach in the reduced-order experimental setting.

0.23

Flexibility-Aware Robotic Manipulation: Deformation Estimation, Kinematics, and Control via Distributed Inertial Measurement

cs.RO ·2026-10-30 ·Amir Hossein Barjini, Sadeq Yaqubi, Pauli Mustalahti, Jouni Mattila
similarity 0.56
Abstract

Flexible robot links challenge the rigid-body assumption, making joint measurements alone insufficient for accurate manipulation. This paper introduces a flexibility-aware manipulation framework that connects structural dynamics directly to sensing, kinematics, and control. Instead of prescribing a dense inertial measurement unit (IMU) network, the dominant vibration modes of each flexible link are first identified from response-convergence and excitation-bandwidth criteria. Under a full-rank modal observability condition, $m$ retained modes require only $m$ independent slope measurements and one reference IMU, defining the minimum observable IMU configuration. The resulting measurements are used to reconstruct the continuous link deformation, which is then incorporated into flexibility-aware forward kinematics and a deformation-informed partial differential equation-based controller. Experiments on hydraulic single- and double-link manipulators evaluate the framework. On the long-reach double-link platform, the proposed kinematics achieves end-effector root mean square errors of $0.0107$~m, $0.0194$~m, and $0.0102$~rad while using fewer sensors than the piecewise-rigid method. Closed-loop reaching experiments further demonstrate real-time integration of IMU-estimated joint states and reconstructed deformation into the proposed controller. The results show that dominant modal information can determine sensing requirements and enable real-time flexibility-aware robotic manipulation.

0.34

Aeroelastically Constrained Optimal Path Planning of a Fixed-Wing Airborne Wind Energy System

eess.SY ·2026-11-10 ·Omid Heydarnia, Jolan Wauters, Tom Lefebvre, Joris Degroote, Guillaume Crevecoeur
published similarity 0.55
Abstract

Multi-megawatt fixed-wing airborne wind energy systems (AWES) use an aircraft with large, slender wings that deform over the pumping cycle. To harvest maximum energy, the cycle is usually designed by means of dedicated reference trajectory optimization routines. It is well known that such routines rely heavily on the system model and that close alignment between the model and the physical system is required for the results to hold in practice. Nevertheless, the wing is usually treated as rigid and structural limits are respected indirectly through upper bounding of states and inputs. In this work, we directly enforce bounds on the elastic deflection and twist of the wing in the power-maximizing periodic optimal control problem. To that end, we model the wing by root-clamped modes, loaded by strip-theory aerodynamics and by the gravitational and inertial loads of the manoeuvring aircraft. To keep the problem tractable, the modal dynamics are replaced by their quasi-static equilibrium, which enters every discretization interval as algebraic constraints. For a multi-megawatt reference aircraft, the elastic twist near the wing tips reaches $1.03^\circ$ along the optimal rigid-wing trajectory. With a twist limit of $0.6^\circ$, the optimal trajectory delivers $31\,\%$ less mean power than the rigid-wing one, mainly through a lower tether tension during reel-out. Rigid-wing trajectory optimization can thus overestimate the power that the wing limits permit. Forward simulations that retain the modal dynamics demonstrate that the quasi-static deflection and twist deviate from the dynamic ones by less than $2\,\%$ of their limits. This work shows that elastic deformation can be accounted for in the trajectory optimization and that, depending on the wing limits, it can strongly reduce the achievable power.

0.32

Time-Optimal Operation of a Load-Hoisting Gantry Crane

eess.SY ·2026-09-16 ·Eric Mountain, Tarunraj Singh
similarity 0.52
Abstract · 16 pages, 12 figures

This paper addresses the problem of designing time-optimal control profiles for point-to-point control of a gantry crane moving in a two dimensional plane. It is assumed that the hoisting motor completes the hoisting maneuver at a constant rate and completes its transition in the same time that it takes for the cart to reach its terminal position. This results in a linear time-varying model and a closed form solution to the time-optimal control problem is shown to be parameterized with Bessel functions. A comprehensive analysis of the structure of the time-optimal control profile is studied by examining the switching function which illustrates the mechanism of introduction and decimation of switches in the bang-off-bang control profile. The variation of the number of switches in the optimal control profile is presented and a non-intuitive control profile structure is noted, one which initiates with a stationary cart, while the hoisting cable length is changed prior to the initiation of motion of the cart. To address the issue of uncertainties in the initial cable length, a model with the sensitivity of the system states with respect to the initial cable length is used to augment the system model and is used for the design of robust time-optimal controllers. Experimental results validate the time-optimal and robust time-optimal control profiles.

0.27

Natural Swing-Up of an Underpowered Double Pendulum

cs.RO eess.SY ·2026-11-12 ·Arne Sachtler, Manuel Keppler, Florian Loeffl, Alin Albu-Schäffer
similarity 0.52
Abstract

Robots with weak motors must ride their natural dynamics rather than fight them. We swing up a direct-drive planar two-link robot, whose motors deliver only about 6\,\% of its shoulder gravity torque, along its nonlinear normal modes, two-dimensional invariant manifolds consisting of periodic orbits. On a non-strict mode, injecting energy necessarily moves the state off the manifold, so pumping and stabilization compete for the same bounded torque. We split the input torque into a power-neutral steering component and a scalar pumping input, the only component that changes the energy. The allocation then becomes a linear program in two variables: maximize pumping subject to the torque limits and one control-Lyapunov constraint. The constraint uses the model-based rate of the error, so no stabilizing feedback gain is needed. Experiments in hardware show swing-ups along both modes and compare the allocation with summing-and-clipping and with prioritized stabilization.

0.30

The Minkowski Wrap: A Relativistic Speed Limiter

eess.SY ·2026-09-22 ·Nicoletta Prencipe, Başak Sakçak, Steven M. LaValle
published similarity 0.51
Abstract · 6 pages, 5 figures, to appear in the proceedings of The 65th IEEE Conference on Decision and Control, CDC 2026

In special relativity, a particle can experience constant acceleration, but at the same time, its motion is constrained by the velocity limit imposed by the speed of light $c$. Inspired by this principle, we propose a method for enforcing velocity bounds in control systems by replacing $c$ with the maximum attainable speed of the system. We refer to this as the ``Minkowski wrap," the operation of deforming the phase portrait of a system so as to enforce desired speed limits. We apply this idea to shape the input generated by a state-feedback stabilizing controller and time-optimal controller considering controlling a double integrator system. By applying Pontryagin's Maximum Principle, we show that the time-optimal control of a wrapped double-integrator system is bang-bang. The proposed method transforms the classical double-integrator dynamics into a ``wrapped" system that respects velocity bounds without the need for clipping, offering an explicit nonlinear feedback control strategy conducive to safety applications.

0.35

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

cs.RO eess.SYmath.OC ·2026-11-01 ·Hamza Tariq, Adeel Akhtar
code/data similarity 0.51
Abstract · 8 pages, 3 Figures

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

0.22

Breaking speed scaling in quadrupedal robots via Huygens' coupled-pendulum dynamics

cs.RO ·2026-09-09 ·Yucheng Tao, Yongbin Jin, Shaowen Cheng, Xianwei Liu, Yanyan Yuan +6 more
similarity 0.50
Abstract

Achieving biological-level running speeds has largely been pursued through advances in control algorithms, which improve the utilization of existing hardware. However, the ultimate speed limits remain governed by the underlying force and torque requirements of rapid locomotion, which are typically addressed through increased actuator capacity. Inspired by Huygens' coupled pendulums, we demonstrate that superior locomotion can emerge from principled exploitation of intrinsic dynamics rather than brute-force hardware scaling. Inter-limb inertial coupling redistributes energy across the gait cycle and reduces peak joint torque required for rapid periodic motion, thereby expanding the achievable speed without proportional increases in actuator capability. Incorporating hardware parameters as additional design variables further extends this analysis into a co-optimization framework, enabling the systematic utilization of inertial coupling in robot design. Guided by this framework, a quadruped robot achieves a running speed of 10.74 m/s (Froude number 21.4) and completes a 100-meter sprint in 12.2 seconds, representing the first legged robot to surpass 10 m/s. These results establish inertial coupling as an underlying mechanism governing high-speed legged locomotion and highlight its role in reducing force requirements, offering new insights into the design of agile robotic systems.

0.24