CS Paper Radar

Time-Optimal Operation of a Load-Hoisting Gantry Crane

Eric Mountain, Tarunraj Singh

eess.SY ·submitted 2026-09-16 16:09 UTC · v1

Abstract

This paper addresses the problem of designing time-optimal control profiles for point-to-point control of a gantry crane moving in a two dimensional plane. It is assumed that the hoisting motor completes the hoisting maneuver at a constant rate and completes its transition in the same time that it takes for the cart to reach its terminal position. This results in a linear time-varying model and a closed form solution to the time-optimal control problem is shown to be parameterized with Bessel functions. A comprehensive analysis of the structure of the time-optimal control profile is studied by examining the switching function which illustrates the mechanism of introduction and decimation of switches in the bang-off-bang control profile. The variation of the number of switches in the optimal control profile is presented and a non-intuitive control profile structure is noted, one which initiates with a stationary cart, while the hoisting cable length is changed prior to the initiation of motion of the cart. To address the issue of uncertainties in the initial cable length, a model with the sensitivity of the system states with respect to the initial cable length is used to augment the system model and is used for the design of robust time-optimal controllers. Experimental results validate the time-optimal and robust time-optimal control profiles.

Comment
16 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Time-Optimal Control of One-Mode Flexible Structures: Analytical Solution and the Cost of Flexibility

eess.SY math.OC ·2026-08-11 ·Manuel Keppler
similarity 0.52
Abstract

The time-optimal solution for a double integrator is a foundational result: its time-displacement law $T_r = 2\sqrt{L}$ for a normalized step $L$ is structure that numerical methods cannot provide. We solve the time-optimal control for rest-to-rest maneuvers of a double integrator coupled to a harmonic oscillator, deriving the first analytical solution and closed-form time-displacement law. Synthesis reduces to a single scalar inversion. This is the model to which the two-mass-spring system, the one-bending-mode flexible structure, and the linearized overhead crane reduce. A Pythagorean identity $T^2 = T_r^2 + 2T_s^2$ decomposes the optimal maneuver time into the rigid-body minimum and a synchronization time $T_s \leq π$, the cost of flexibility, giving the sharp envelope $2\sqrt{L} \leq T \leq 2\sqrt{L + π^2/2}$. The penalty is scale-dependent. For small maneuvers $T \propto L^{1/4}$: one oscillator mode costs as much as two additional integrators. For large ones, flexibility is asymptotically free. It vanishes at the natural motions, where the oscillator completes whole cycles. A closed-form sensitivity formula proves the maneuver time non-monotone in stiffness. Adding flexibility to a rigid body never shortens a maneuver, yet softening an already flexible structure can: stiffer is not always faster. The natural motions are robust design targets since first-order sensitivity to stiffness vanishes there.

0.04

Quantile-Based Command-Reserve MPC for Current-Command Gimbal Pointing

cs.RO eess.SY ·2026-10-26 ·Yaokun Lu, Yifan Li, Enmei Wang, Hao Teng, Pengwei Hu +1 more
similarity 0.47
Abstract · 10 pages, 4 figures. Supplementary hardware trial data and recomputation scripts included as ancillary files. Submitted to Journal of the Fr…

This paper studies the constrained line-of-sight pointing control problem of a two-axis current-command gimbal subjected to mismatched mechanical disturbances. Friction, torque ripple, current-response lag, model mismatch, and limited drive commands make accurate pointing more challenging yet interesting. A quantile disturbance predictor is proposed to compensate predictable acceleration residuals and describe their remaining uncertainty, with the aid of learning median and outer quantiles from state, command, and reference histories. A tube-inspired model predictive controller is proposed to reserve command headroom according to prediction uncertainty, with the aid of calibrated radii and stage-dependent input margins. The median improves the nominal prediction, while the radius adapts the command reserve without adding optimization variables. A finite-horizon tube inclusion result is established for a specified linear error model and fixed ancillary policy; its conditions are distinguished from the approximations used in hardware. Native command bounds and a final command limiter keep the sent commands within their prescribed range. On a two-axis embedded platform, four controller configurations are compared in seven repeated trials each. The proposed configuration achieves a two-dimensional pointing root-mean-square error of $3.94 \pm 0.10$ mrad with no command-limit samples in the evaluation windows. Its performance supports the combined use of residual prediction and adaptive command margins in the tested operating condition. Solver times and logged loop overruns are reported separately for the nominal 100 Hz implementation.

0.40

SwingRL: Adaptive Observation Reinforcement Learning with World-Model Prediction for Cable-Suspended Hoisting Control

cs.RO ·2026-09-27 ·Guangming Wang, Xiaoyu Zhang, Yucheng Xin, Wanli Ma, Jiucai Liu +6 more
similarity 0.46
Abstract

Cable-suspended hoisting is widely used to move heavy or bulky payloads that cannot be handled conveniently by rigid pick-and-place systems, for example in crane-assisted construction. Robotic hoisting using flexible cables is challenging because payload motion is underactuated, external disturbances vary, and delayed or lost visual observations can make the perceived payload state stale at control execution. These effects are particularly critical during precise insertion of a suspended payload's sockets onto rebar pins, which is a very common task in construction environments. We present SwingRL, a residual reinforcement-learning (RL) framework that combines an age-aware world model, a classical anti-swing prior, and a recurrent residual policy to address two coupled problems: stale feedback and uncertain dynamics. The world model propagates the newest received payload observation to the current control step using the executed commands, providing a time-aligned state estimate under delayed and lossy sensing. The prior supplies nominal tracking and swing damping. The residual policy learns bounded corrections to the prior rather than the complete control law, compensating for system-parameter variation, external disturbances, and remaining state-estimation errors. We evaluate SwingRL against classical and learning-based baselines across a cumulative difficulty ladder covering system-parameter variation, wind disturbance, degraded sensing, and strong gusts. Under the most difficult setting, SwingRL achieves 69.5% strict and 77.3% broad success, exceeding all baselines by at least 60 percentage points, respectively. World-model ablations support the role of time-aligned state estimation in maintaining insertion success as observation loss increases. Finally, without real-robot fine-tuning, SwingRL achieves 90% success on the physical rig.

0.20

Aerial Non-Stop Trajectories Preserving the Equilibrium of Loads Suspended by Variable-Length Cables

eess.SY ·2026-09-11 ·Antonio Franchi, Alberto Landi, Chiara Gabellieri
similarity 0.45
Abstract

This work studies equilibrium-preserving non-stop trajectories of aerial carriers connected to rigid loads by variable-length cables. Internal-force motions vary the cable directions without changing the load wrench, while cable-length actuation shapes the radial realization of the carrier trajectories. We derive an explicit cable-length law for realizing prescribed carrier-position profiles along a fixed direction, with constant altitude as a relevant specialization. Under this constraint, a carrier stops exactly when its cable direction stops changing. This characterization reveals a distinction between unrestricted and level motion: variable cable lengths enable bounded non-stop motion with two carriers, whereas periodic level non-stop motion is obstructed for two carriers and constructively achieved for three or more under explicit geometric and feasibility conditions. Numerical simulations illustrate the constant-altitude construction.

0.25

Bio-inspired Thrust-Assisted Trotting on a legged-Aerial Robot via Real-Time QP-MPC

cs.RO ·2026-10-19 ·Shreyansh Pitroda, Eric Sihite, Alireza Ramezani, Morteza Gharib
published similarity 0.45
Abstract · To be published in IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This paper presents the hardware implementation of a quadratic program-based controller on Harpy: thruster-assisted bipedal robot to perform thruster-assisted trotting. This is inspired by wing-assisted locomotion observed in birds such as the chukar partridge, which employ thrust vectoring to manipulate the ground reaction force. The proposed controller formulates the thruster-assisted spring-loaded inverted pendulum dynamics as a condensed QP-based model predictive control problem, enabling simultaneous regulation of ground contact force and active thrust vectoring at 500 Hz. A decoupled control architecture is used, where the robot's sagittal dynamics are controlled using QP-MPC while the frontal dynamics is regulated using a cascade orientation stabilization controller. Two experiments were conducted with different forward reference velocities of 0 m/s and 0.1 m/s. While the instantaneous velocity oscillates, the mean velocities can track their respective reference. Additionally, joint tracking error remains within 1 deg while tracking the desired leg length given by the leg trajectory controller and desired swing trajectory given by Raibert's heuristic. The QP-MPC problem is consistently solved with 0.18ms, which is well within the 2ms computation budget while satisfying the GRF friction cone constraint.

0.40

Overcoming Fundamental Control Limitations in Powered Descent Flight through Robust Incremental Nonlinear Dynamic Inversion

eess.SY math.OC ·2026-11-05 ·João T. Diz, Paulo Rosa, Pedro Simplício, Paul Acquatella, Erik-Jan van Kampen +1 more
published similarity 0.44
Abstract · 28 pages, 16 figures, 5 tables. Accepted for presentation at the AIAA SciTech 2027 Forum, Orlando, FL, January 2027

This work identifies a fundamental, controller-independent limitation in reusable launch vehicle powered descent: a sudden $180^\circ$ phase transition in the open-loop transfer functions from the control inputs to the lateral drift and drift rate. The transition occurs inside the flight envelope, reverses the effective control direction, and can destabilize the closed loop system under uncertainty. An analytical condition governing this transition is derived, its physical mechanism is established, and its dependence on vehicle mass, aerodynamic properties, and geometry is characterized. An Incremental Nonlinear Dynamic Inversion (INDI)-based control architecture is then developed to inherently address this limitation and is tuned via $\mathcal{H}_\infty$ Closed Loop Shaping to provide local robustness and performance guarantees. The internal dynamics introduced by the INDI inversion are analytically derived and proven to be stable throughout the flight envelope. The proposed controller is compared against a robust gain-scheduled baseline controller through linear stability analysis and an extensive nonlinear Monte Carlo campaign. Both controllers achieve 100% success across the considered Monte Carlo campaign, though the INDI-based controller provides improved tracking performance, superior nominal and dispersed stability margins, requires fewer controller design points, and reduces controller tuning complexity.

0.45

From Asymptotic to Designer-Assigned-Time Control: A Review of Stability Notions, Design Mechanisms, and Controller Architectures

eess.SY ·2026-10-08 ·Özhan Bingöl
surveybenchmark similarity 0.44
Abstract

Many control tasks require a target to be reached not only eventually but on time. Finite-, fixed-, predefined-, and prescribed-time control address this need, yet the labels are used loosely: a settling time that grows with the initial condition, a bound that holds for all initial conditions, a deadline chosen by the designer, and a limit attained only at the terminal instant often share one name. This review aims to make such claims comparable. It separates three questions that are often conflated: what temporal property is promised, which feature of the Lyapunov analysis produces it, and which controller architecture carries it into the closed loop. A recurring question is whether a guarantee proven for an idealized loop survives once observers, adaptation, disturbances, actuator limits, and digital implementation are included. The examined studies are therefore audited one by one, recording what each claims, which variable is actually certified, and how the result is validated. The audit shows that estimation and approximation errors often reduce an exact guarantee to a practical one, and that experimental evidence comes mostly from fast electromechanical systems. A scalar benchmark with two complementary tunings shows how much of the apparent difference between methods stems from conservative bounds, initial-condition dependence, and numerical tolerance, and how saturation and sampling can delay or remove a deadline. The review closes with open problems, among them deciding which deadlines a given plant can meet, combining certificates across interconnected subsystems, and preserving a guarantee through implementation.

0.18

Real-Time Reference Shaping for Servo Systems

eess.SY ·2026-08-31 ·Zehui Lu, Yebin Wang, Go Sato, Fujita Tomoya
similarity 0.44
Abstract

This paper addresses real-time motion planning for servo systems subject to nonlinear, state-dependent actuator constraints. A reference reshaping method is proposed that combines analytical optimality with high computational efficiency. Using Karush-Kuhn-Tucker conditions, the problem structure is explicitly characterized, and it is shown that the optimal solution lies within a finite set of candidate points. The complete solution set is constructed via closed-form expressions and a small-scale eigenvalue problem, yielding a deterministic algorithm that recovers the exact optimal solution without iterative optimization or root-finding. To address kinematic mismatch induced by aggressive commands, a real-time trajectory compensator is introduced to correct accumulated position error while preserving feasibility. Simulation results demonstrate significant computational speed improvements over existing methods, enabling real-time implementation at frequencies approaching 100 kHz.

0.24