CS Paper Radar

Overcoming Fundamental Control Limitations in Powered Descent Flight through Robust Incremental Nonlinear Dynamic Inversion

João T. Diz, Paulo Rosa, Pedro Simplício, Paul Acquatella, Erik-Jan van Kampen, Spilios Theodoulis

eess.SY math.OC ·submitted 2026-11-05 14:54 UTC · v1
published

Abstract

This work identifies a fundamental, controller-independent limitation in reusable launch vehicle powered descent: a sudden $180^\circ$ phase transition in the open-loop transfer functions from the control inputs to the lateral drift and drift rate. The transition occurs inside the flight envelope, reverses the effective control direction, and can destabilize the closed loop system under uncertainty. An analytical condition governing this transition is derived, its physical mechanism is established, and its dependence on vehicle mass, aerodynamic properties, and geometry is characterized. An Incremental Nonlinear Dynamic Inversion (INDI)-based control architecture is then developed to inherently address this limitation and is tuned via $\mathcal{H}_\infty$ Closed Loop Shaping to provide local robustness and performance guarantees. The internal dynamics introduced by the INDI inversion are analytically derived and proven to be stable throughout the flight envelope. The proposed controller is compared against a robust gain-scheduled baseline controller through linear stability analysis and an extensive nonlinear Monte Carlo campaign. Both controllers achieve 100% success across the considered Monte Carlo campaign, though the INDI-based controller provides improved tracking performance, superior nominal and dispersed stability margins, requires fewer controller design points, and reduces controller tuning complexity.

Comment
28 pages, 16 figures, 5 tables. Accepted for presentation at the AIAA SciTech 2027 Forum, Orlando, FL, January 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Dynamic Inversion: An Incrementally Evolving Methodology for Flight Control Design

eess.SY math.DGmath.DSmath.OC ·2026-08-24 ·Daniel Milz, Gertjan Looye
publishedsurvey similarity 0.63
Abstract · 82 pages, 31 figures, invited to be published in "Progress in Aerospace Sciences"

Nonlinear Dynamic Inversion (NDI) has become a standard methodology in flight control law design. It offers an intuitive approach to decouple commanded variable responses, handle system nonlinearities, and adapt to operating conditions. NDI also comes with a well-structured architecture that reduces design effort by addressing various functional aspects in separate components, and that allows straightforward integration of extended capabilities, such as envelope protection, control saturation handling, and compensating for faults or damage. A development that has resulted in considerable renewed attention is the use of (angular) acceleration sensors to partially replace inverse model equations. Known as incremental NDI, or INDI, this development offers reduced sensitivity to modeling errors and lower control law complexity. Incremental NDI, however, lacks useful design degrees of freedom in the previously present inverse model equations and underlying feedback signal synthesis, and comes with pitfalls in design aspects like control allocation, disturbance rejection, and inter-disciplinary couplings. This has given rise to recently developed hybrid and mathematically restructured approaches. The aim of this article is to give an up-to-date, structured overview of the various evolved forms of NDI from conceptual, historical, architectural, and mathematical perspectives. It hereby intends to provide useful considerations for future flight control law developments by reviewing its various forms and potentials from methodological, design, and application points of view.

0.57

Estimation-Aware Control on Quadrotor State Manifolds via Anisotropic Covariance Filtering

eess.SY ·2026-11-11 ·Daniel Engelsman, Itzik Klein
similarity 0.63
Abstract · 11 Pages, 14 Figures, 2 Tables

Conventional nonlinear flight controllers operate under the implicit assumption of reliable, high-confidence state feedback. During transient sensing degradation or partial unobservability, state estimation uncertainty is frequently misinterpreted as physical tracking error, triggering aggressive and parasitic corrective inputs. To mitigate this vulnerability, we propose a generalized Estimation-Aware (EA) control framework that directly incorporates real-time estimator confidence into control execution. By mapping the posterior error covariance $\mathbf{P}_{k\mid k}$ into an uncertainty-dependent modulation operator, the EA mechanism dynamically scales feedback authority, performing anisotropic attenuation along weakly observed state directions to prevent false error corrections. Validated across six distinct control paradigms, the proposed approach demonstrates substantial performance gains across all baselines. In particular, when integrated into an Incremental Nonlinear Dynamic Inversion (INDI) architecture, the EA mechanism reduces tracking and estimation errors by 24.34% and 33.24%, respectively, at a high flight speed of 10 m/s.

0.20

Aerodynamic Prior-Free Coordinated Trajectory Generation and Tracking Control for a Tail-Sitter UAV

cs.RO ·2026-09-10 ·Erchao Rong, Zihao Liu, Junning Liang, Jianguo Wang, Xiao Jie +3 more
top venuecode/data similarity 0.58
Abstract

This paper presents a coordinated trajectory generation and tracking control framework for a tail-sitter unmanned aerial vehicle (UAV), which does not require aerodynamic priors identified for a specific airframe while addressing the challenge of flight control under highly nonlinear aerodynamics across the full flight envelope. The core innovation lies in employing phase-specific aerodynamic modeling strategies for planning and tracking, tailored to their distinct functional characteristics, without requiring airframe-specific aerodynamic priors. Specifically, the phi-theory model under coordinated flight is employed to derive an analytic differential flatness mapping, and a simplified but locally accurate model is established for predictive control to enable real-time aerodynamic parameter estimation. The proposed framework is evaluated extensively through both simulation and challenging real-world flight tests under mild wind conditions, showing high-precision tracking and adaptability across the tested aerodynamic conditions. To the best of our knowledge, this is the first real-world demonstration of accurate trajectory tracking over tested flight regimes spanning the full envelope of a tail-sitter UAV without relying on aerodynamic identification campaigns. The source code of our framework is available at: https://github.com/SYSU-HILAB/AP-PnC.

0.34

Trajectory Inversion for a Rudderless Dual Vectored-Thrust Flying Wing

cs.RO ·2026-11-07 ·Weicheng Di, Qiqi Liu, Jinwu Xiang, Daochun Li, Zhan Tu
similarity 0.58
Abstract

A rudderless dual vectored-thrust flying wing combines vertical takeoff and landing with efficient for- ward flight in a compact tailless configuration. Without aerodynamic control surfaces, vectored thrust couples translation and pitch control. Therefore, generating dy- namically compatible trajectories remains an open chal- lenge. To address this challenge, this study proposes a trajectory generation method that jointly optimizes path geometry and timing. Trajectory inversion yields state and control histories that satisfy the coupled equations of motion. The optimization balances curvature-induced acceleration against aerodynamic support, lowering thrust- vectoring demand while retaining the defining maneuver features. Representative looping and rolling sequences are tracked in closed-loop simulations. These results provide a basis for planning autonomous aerobatic maneuvers with rudderless vectored-thrust aircraft.

0.31

Taming the Tilt: A Unified Pilot Control Concept for Transformational eVTOL Aircraft

eess.SY math.OC ·2026-08-20 ·Daniel Milz, Marc May, Andreas Seefried, Tobias Bellmann
published similarity 0.57
Abstract · Accepted for publication in "Aerospace Systems", 31 pages, 16 figures

Transformational electric vertical take-off and landing (eVTOL) vehicles have gained significant attention over the past decade due to their efficient wing-borne cruise capabilities and reduced reliance on ground-based infrastructure. However, control system design for these vehicles remains challenging, as they must operate across multiple flight phases, each with distinct dominant dynamics. If left unaddressed, this complexity would significantly increase pilot workload, thus motivating the development of pilot control systems for multi-phase flight operations. The Simplified Vehicle Operations concept presents a promising strategy for reducing pilot workload. This study presents the design and implementation of a novel pilot control concept for eVTOL aircraft, validated through a tandem tilt-wing aircraft simulation on a full-motion simulator equipped with an active, force-feedback side stick. The system provides pilots with tactile feedback during specific flight phases, supporting intuitive control. The proposed approach enables seamless transitions and multi-phase flight maneuvers by leveraging the available degrees of freedom. Furthermore, an optimal-control-based methodology is proposed as a metric to evaluate command-filter-induced performance penalties and inceptor activities. The results show that the proposed command filter does not significantly increase the mission duration compared to the closed-loop system, while the active side stick helps reduce inceptor activity.

0.40

Control Allocation with Adaptive Augmentation for Aerodynamic Optimization of Trailing Edge Morphing Aircraft

eess.SY math.OC ·2026-10-01 ·Mark Spiller, Lennart Kracke, Johannes Autenrieb
similarity 0.56
Abstract · Submitted to American Control Conference (ACC) 2027

This paper presents a control allocation framework with adaptive augmentation for a trailing edge morphing aircraft, providing stability guarantees under uncertainty while exploiting the available morphing degrees of freedom to optimize aerodynamic efficiency. A baseline controller is designed using the nominal aircraft model to establish the desired closed-loop reference dynamics. For the aerodynamics, the wing shape is optimized dependent on the flight state to achieve a target elliptical lift distribution corresponding to minimum induced drag. The adaptive augmentation is tailored to the control allocation problem to account for the uncertain system dynamics and stabilize the aircraft around the reference dynamics. The resulting stabilization condition is formulated as hard constraint in the allocation problem while minimizing deviations from the corresponding state-dependent aerodynamically optimal wing shape. Numerical results demonstrate that the adaptive augmentation compensates for matched uncertainties while the control allocation optimizes the wing shape with respect to the reference elliptical lift distribution.

0.18

Selective Sliding Mode Control Enhances Robustness of Aerial Robots Under Disturbances

cs.RO eess.SY ·2026-10-28 ·Anoop Kiran, Thales C. Silva, Nora Ayanian
hot direction similarity 0.55
Abstract · 8 pages, 5 tables, 8 figures

Quadrotor control under disturbances such as wind gusts and payload variations remains challenging. First-order sliding mode control (SMC) and matched/unmatched uncertainty distinction are classical approaches; however, neither tells a practitioner which loops in a cascaded controller should be made robust to sustain disturbances, how to tune those loops, nor what the additional costs are on an embedded processor. Applying robust control uniformly across all axes addresses disturbances indiscriminately, adding tuning effort on axes where no disturbance acts. On inherently underactuated vehicles, disturbances along some axes cannot be opposed directly at all. We propose a principled methodology for deciding where robust control belongs in a cascaded architecture, with all control running onboard the vehicle. We recover the acting disturbance from PID hover flights under disturbance by inverting the equations of motion, use the recovered signal to identify and quantify the excited axes, and deploy robust control where it counts. Experiments on a Crazyflie 2.1 quadrotor under slung-payload and oblique-wind disturbances show tracking improvements concentrated on the axes the rule selects, and gain sweeps confirm that the switching gain reduces error on matched axes but has no effect on an excited unmatched axis, as the analysis predicts.

0.35

Controllability-Informed Distributed Electric Propulsion Aircraft Design Using Probabilistic Attainable Moment Sets

eess.SY math.OC ·2026-11-13 ·Umut Demir, Torbjørn Cunis, Aamir Ahmad, Walter Fichter
similarity 0.54
Abstract

Integrated aircraft design combines models of aerodynamics, propulsion, mass, and mission performance in one design loop, so that the disciplines can be traded against each other from the earliest stage. For configurations with distributed electric propulsion (DEP), part of the control authority comes from the propulsion system itself, which directly affects the required size of the tail and should therefore be known while the aircraft is being sized. This paper presents a controllability measure that is evaluated for every design in the loop and returned to it as a design signal. The attainable moment set of each candidate design is computed from the surrugate models of the loop and it is compared with a required moment set. Since the low-fidelity surrugate models are uncertain, the comparison is formulated with probabilistic attainable moment sets: the uncertainty is propagated to the boundary of the set, which yields a margin for every direction in the moment space and the probability of violating the requirement. The design loop thereby informed whether a configuration provides sufficient control authority, on which axes it falls short, and how this changes with the design variables. The approach is demonstrated on a DEP regional aircraft, where the signal is used to assess the size of the vertical tail.

0.24