CS Paper Radar

Control Allocation with Adaptive Augmentation for Aerodynamic Optimization of Trailing Edge Morphing Aircraft

Mark Spiller, Lennart Kracke, Johannes Autenrieb

eess.SY math.OC ·submitted 2026-10-01 08:48 UTC · v1

Abstract

This paper presents a control allocation framework with adaptive augmentation for a trailing edge morphing aircraft, providing stability guarantees under uncertainty while exploiting the available morphing degrees of freedom to optimize aerodynamic efficiency. A baseline controller is designed using the nominal aircraft model to establish the desired closed-loop reference dynamics. For the aerodynamics, the wing shape is optimized dependent on the flight state to achieve a target elliptical lift distribution corresponding to minimum induced drag. The adaptive augmentation is tailored to the control allocation problem to account for the uncertain system dynamics and stabilize the aircraft around the reference dynamics. The resulting stabilization condition is formulated as hard constraint in the allocation problem while minimizing deviations from the corresponding state-dependent aerodynamically optimal wing shape. Numerical results demonstrate that the adaptive augmentation compensates for matched uncertainties while the control allocation optimizes the wing shape with respect to the reference elliptical lift distribution.

Comment
Submitted to American Control Conference (ACC) 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Safe Learning-Based Adaptive Augmentation Control for Fixed-Wing UAV under Uncertainty

eess.SY ·2026-09-24 ·Leon Raguse, Lennart Kracke, Mayank Shekhar Jha, Johannes Autenrieb, Mark Spiller
similarity 0.70
Abstract · Submitted to American Control Conference (ACC) 2027

This paper presents a learning-based adaptive augmentation control concept inspired by the adaptation mechanisms of conventional adaptive control, while not being restricted to their specific parametric adaptation structures. In contrast to augmenting a reinforcement learning (RL) baseline controller with classical adaptive control to account for the simulation-to-reality gap, the proposed approach uses RL-based adaptive augmentation to address the limitations of conventional adaptive control. Domain randomization combined with observation stacking is employed to train the RL-based augmentation to compensate for matched uncertainties in a fixed-wing aircraft system. To ensure constraint satisfaction during operation, a safety filter is incorporated into the control architecture. Based on the concept of pseudo control hedging (PCH), we propose a modified reference model that avoids undesirable interactions between the RL-based augmentation and the safety filter. To reduce the conservatism of the safety filter, we additionally incorporate a disturbance observer. The proposed approach is evaluated on a fixed-wing aircraft model subject to uncertainties.

0.13

Safe Receding-Horizon Control of Fixed-Wing Aircraft Using Constrained Approximate Dynamic Programming

eess.SY ·2026-10-05 ·Felipe Arenas-Uribe, Ricardo Gutierrez, Jesse B. Hoagg
similarity 0.61
Abstract

We present a receding-horizon optimal control for fixed-wing aircraft subject to state constraints. These constraints include operational constraints such as altitude, geofencing, and obstacle avoidance, as well as bounds on flight-path angle, roll angle, and airspeed. The state constraints are composed into a single soft-minimum control barrier function (CBF). We use this composite CBF in a constrained-approximate dynamic program to obtain a sequence of analytic closed-form control functions that approximately minimize a quadratic finite-horizon integral cost subject to the CBF constraint. The resulting receding-horizon control is non-myopic in the sense that it approximately optimizes the integral cost while satisfying the state constraint at all times along the entire prediction horizon. We demonstrate constraint satisfaction and performance in simulations of a fixed-wing aircraft navigating an obstacle-filled airspace under wind uncertainty. We also compare this receding-horizon control with 2 other methods.

0.14

Reinforcement Learning for Null-Space Exploitation in Pseudo-Inverse Control Allocation

eess.SY ·2026-11-13 ·Umut Demir, Torbjørn Cunis, Aamir Ahmad, Walter Fichter
similarity 0.58
Abstract

Pseudo-inverse methods are widely used to solve control allocation problems for overactuated aircraft with redundant control effectors. These methods reliably satisfy the primary command tracking objective, while the remaining null-space degrees of freedom are in principle available for secondary objectives such as drag reduction or actuator wear balancing. However, exploiting this freedom in practice requires hand-tuned weighting matrices or a priori preferred deflections that are difficult to specify across a wide flight envelope with nonlinear, state-dependent dynamics. This paper presents a hybrid architecture in which a reinforcement learning agent operates exclusively within the null space of the control effectiveness matrix, learning secondary objective strategies directly from interaction with the flight dynamics. The null-space projector guarantees by construction that primary command tracking remains invariant regardless of the agent output, providing a principled separation between certified primary control and adaptive secondary optimization. The approach is demonstrated on a nonlinear six-degree-of-freedom distributed electric propulsion aircraft model with aero-propulsive effects across diverse mission scenarios, achieving measurable drag reduction compared to the baseline allocation while preserving tracking integrity and respecting actuator constraints. The proposed architecture forms a foundation for future extensions toward multi-objective, mission-conditioned policies.

0.21

Dynamic System Emulation: Fixed Wing Dynamics on a Multicopter

eess.SY cs.RO ·2026-09-06 ·Abdelhakim Amer, Andriy Sarabakha
similarity 0.56
Abstract · 7 pages, 6 figures

This work presents a control framework that enables a multicopter equipped with a two-axis gimbal to emulate the flight dynamics of a fixed-wing aircraft. The goal is to provide an operationally simple platform for training and simulation that avoids the aerodynamic constraints of fixed-wing vehicles, such as minimum airspeed and nonholonomic constraints. A state-input mapping between the two platforms is derived using dynamic feedback linearization. The framework is evaluated on representative fixed-wing manoeuvres. Results show high-fidelity emulation under nominal conditions. While evaluations are conducted in simulation, the approach establishes a practical path toward hardware deployment for pilot training, autonomy research, and controller benchmarking.

0.27

Overcoming Fundamental Control Limitations in Powered Descent Flight through Robust Incremental Nonlinear Dynamic Inversion

eess.SY math.OC ·2026-11-05 ·João T. Diz, Paulo Rosa, Pedro Simplício, Paul Acquatella, Erik-Jan van Kampen +1 more
published similarity 0.56
Abstract · 28 pages, 16 figures, 5 tables. Accepted for presentation at the AIAA SciTech 2027 Forum, Orlando, FL, January 2027

This work identifies a fundamental, controller-independent limitation in reusable launch vehicle powered descent: a sudden $180^\circ$ phase transition in the open-loop transfer functions from the control inputs to the lateral drift and drift rate. The transition occurs inside the flight envelope, reverses the effective control direction, and can destabilize the closed loop system under uncertainty. An analytical condition governing this transition is derived, its physical mechanism is established, and its dependence on vehicle mass, aerodynamic properties, and geometry is characterized. An Incremental Nonlinear Dynamic Inversion (INDI)-based control architecture is then developed to inherently address this limitation and is tuned via $\mathcal{H}_\infty$ Closed Loop Shaping to provide local robustness and performance guarantees. The internal dynamics introduced by the INDI inversion are analytically derived and proven to be stable throughout the flight envelope. The proposed controller is compared against a robust gain-scheduled baseline controller through linear stability analysis and an extensive nonlinear Monte Carlo campaign. Both controllers achieve 100% success across the considered Monte Carlo campaign, though the INDI-based controller provides improved tracking performance, superior nominal and dispersed stability margins, requires fewer controller design points, and reduces controller tuning complexity.

0.45

Condition-Enhanced Generative Adversarial Network for Aerodynamic Configuration Design of Commercial Aircraft

cs.LG ·2026-10-25 ·Youzheng Yu, Jiaqing Kou, Weiwei Zhang
similarity 0.55
Abstract

Generative machine learning provides an end-to-end framework for aerodynamic design optimization by generating diverse aerodynamic configurations conditioned on target performance. However, the generated designs may violate geometric constraints or deviate from the prescribed aerodynamic performance. Therefore, we propose a Condition-Enhanced Generative Adversarial Network (CEGAN) that embeds geometric and aerodynamic information into the generative process. A condition-informed loss function is developed by combining a geometry-guided feasibility penalty with an aerodynamic performance penalty evaluated by surrogate models trained on the same dataset. Additionally, an output filtering mechanism discards infeasible designs using these surrogate models, ensuring compliance with prescribed conditions. The method is demonstrated on aircraft configurations similar to the Cessna Citation X. Each configuration is represented by 28 shape parameters, whose aerodynamic performance is evaluated using OpenVSP. Interpolation and extrapolation tests are conducted for different network architectures and conditioning strategies. Compared with the baseline model, CEGAN reduces the average generation error by at least 36% for interpolated conditions and by at least 46% under extreme extrapolation conditions, while successfully producing diverse and physically feasible designs that extend beyond the training distribution. Therefore, the proposed CEGAN framework offers a robust and accurate tool for rapid aerodynamic configuration exploration during the conceptual design phase.

0.24

Aeroelastically Constrained Optimal Path Planning of a Fixed-Wing Airborne Wind Energy System

eess.SY ·2026-11-10 ·Omid Heydarnia, Jolan Wauters, Tom Lefebvre, Joris Degroote, Guillaume Crevecoeur
published similarity 0.54
Abstract

Multi-megawatt fixed-wing airborne wind energy systems (AWES) use an aircraft with large, slender wings that deform over the pumping cycle. To harvest maximum energy, the cycle is usually designed by means of dedicated reference trajectory optimization routines. It is well known that such routines rely heavily on the system model and that close alignment between the model and the physical system is required for the results to hold in practice. Nevertheless, the wing is usually treated as rigid and structural limits are respected indirectly through upper bounding of states and inputs. In this work, we directly enforce bounds on the elastic deflection and twist of the wing in the power-maximizing periodic optimal control problem. To that end, we model the wing by root-clamped modes, loaded by strip-theory aerodynamics and by the gravitational and inertial loads of the manoeuvring aircraft. To keep the problem tractable, the modal dynamics are replaced by their quasi-static equilibrium, which enters every discretization interval as algebraic constraints. For a multi-megawatt reference aircraft, the elastic twist near the wing tips reaches $1.03^\circ$ along the optimal rigid-wing trajectory. With a twist limit of $0.6^\circ$, the optimal trajectory delivers $31\,\%$ less mean power than the rigid-wing one, mainly through a lower tether tension during reel-out. Rigid-wing trajectory optimization can thus overestimate the power that the wing limits permit. Forward simulations that retain the modal dynamics demonstrate that the quasi-static deflection and twist deviate from the dynamic ones by less than $2\,\%$ of their limits. This work shows that elastic deformation can be accounted for in the trajectory optimization and that, depending on the wing limits, it can strongly reduce the achievable power.

0.32

Dynamic Inversion: An Incrementally Evolving Methodology for Flight Control Design

eess.SY math.DGmath.DSmath.OC ·2026-08-24 ·Daniel Milz, Gertjan Looye
publishedsurvey similarity 0.53
Abstract · 82 pages, 31 figures, invited to be published in "Progress in Aerospace Sciences"

Nonlinear Dynamic Inversion (NDI) has become a standard methodology in flight control law design. It offers an intuitive approach to decouple commanded variable responses, handle system nonlinearities, and adapt to operating conditions. NDI also comes with a well-structured architecture that reduces design effort by addressing various functional aspects in separate components, and that allows straightforward integration of extended capabilities, such as envelope protection, control saturation handling, and compensating for faults or damage. A development that has resulted in considerable renewed attention is the use of (angular) acceleration sensors to partially replace inverse model equations. Known as incremental NDI, or INDI, this development offers reduced sensitivity to modeling errors and lower control law complexity. Incremental NDI, however, lacks useful design degrees of freedom in the previously present inverse model equations and underlying feedback signal synthesis, and comes with pitfalls in design aspects like control allocation, disturbance rejection, and inter-disciplinary couplings. This has given rise to recently developed hybrid and mathematically restructured approaches. The aim of this article is to give an up-to-date, structured overview of the various evolved forms of NDI from conceptual, historical, architectural, and mathematical perspectives. It hereby intends to provide useful considerations for future flight control law developments by reviewing its various forms and potentials from methodological, design, and application points of view.

0.57