CS Paper Radar

Quantile-Based Command-Reserve MPC for Current-Command Gimbal Pointing

Yaokun Lu, Yifan Li, Enmei Wang, Hao Teng, Pengwei Hu, Jianzhong Qiao

cs.RO eess.SY ·submitted 2026-10-26 06:37 UTC · v1

Abstract

This paper studies the constrained line-of-sight pointing control problem of a two-axis current-command gimbal subjected to mismatched mechanical disturbances. Friction, torque ripple, current-response lag, model mismatch, and limited drive commands make accurate pointing more challenging yet interesting. A quantile disturbance predictor is proposed to compensate predictable acceleration residuals and describe their remaining uncertainty, with the aid of learning median and outer quantiles from state, command, and reference histories. A tube-inspired model predictive controller is proposed to reserve command headroom according to prediction uncertainty, with the aid of calibrated radii and stage-dependent input margins. The median improves the nominal prediction, while the radius adapts the command reserve without adding optimization variables. A finite-horizon tube inclusion result is established for a specified linear error model and fixed ancillary policy; its conditions are distinguished from the approximations used in hardware. Native command bounds and a final command limiter keep the sent commands within their prescribed range. On a two-axis embedded platform, four controller configurations are compared in seven repeated trials each. The proposed configuration achieves a two-dimensional pointing root-mean-square error of $3.94 \pm 0.10$ mrad with no command-limit samples in the evaluation windows. Its performance supports the combined use of residual prediction and adaptive command margins in the tested operating condition. Solver times and logged loop overruns are reported separately for the nominal 100 Hz implementation.

Comment
10 pages, 4 figures. Supplementary hardware trial data and recomputation scripts included as ancillary files. Submitted to Journal of the Franklin Institute

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed and Data-Driven Composite Disturbance Separation and Predictive Control for Airborne Electro-Optical Gimbals with Multiple Constraints

cs.RO eess.SY ·2026-10-26 ·Yaokun Lu, Yifan Li, Zhixuan Zhang, Enmei Wang, Hao Teng +1 more
similarity 0.59
Abstract · 20 pages, 8 figures. Includes supplementary derivations and proofs. Demonstration video included as an ancillary file

This paper studies the constrained pointing control problem of airborne electro-optical gimbals subjected to composite periodic and aperiodic disturbances. Under carrier vibration, input delay, and actuator constraints, achieving line-of-sight stabilization and tracking is challenging. A disturbance-separated model predictive control (MPC) scheme is proposed to compensate these heterogeneous disturbances according to their physical characteristics. An adaptive periodic observer predicts multi-harmonic vibrations over the MPC horizon using linear-regression frequency estimation. A linear observer estimates the aperiodic disturbance, and a bounded long short-term memory (LSTM) network predicts its change over the input delay. Embedding periodic predictions into the MPC model while applying aperiodic compensation outside the optimizer limits amplification of aperiodic estimation errors and improves pointing accuracy under frequency changes and parameter mismatch. On the stated headroom envelope, input-set tightening provides feasible commands within the prescribed limits, and a regional practical tracking bound is established under explicit input-sequence and predicted-state margin conditions. A UAV-mounted two-axis gimbal platform is assembled for comparative indoor hovering experiments, complemented by simulations under frequency changes and parameter mismatch. In the reported trials, the proposed method achieves yaw and pitch relative-angle root-mean-square errors (RMSEs) of 0.770 degrees and 0.350 degrees, reducing tracking errors by 25.1% and 45.9% compared with linear active disturbance rejection control.

0.39

Offset-Free Data-Driven Predictive Control: Implicit and Explicit Disturbance Formulations

eess.SY ·2026-11-09 ·Lucca Heinze Faro, Yuanbo Nie, Paul Trodden
similarity 0.58
Abstract · 6 pages, 3 figures. Submitted to ECC 2027

Offset-free tracking is a key objective of any control algorithm. For predictive controllers with linear models, it is well understood that rejecting asymptotically-constant disturbances necessitates augmenting the prediction model with $p$ integrating states, where $p$ is the number of measured outputs. This can be achieved in model predictive control (MPC) by using a velocity form or a combination of disturbance model and observer. In data-driven predictive control (DPC), implicit incorporation of integrating states using the velocity form has been successfully adopted to obtain offset-free tracking; however, formulations based on an explicit disturbance model and observer have not yet been explored. In this paper, we first study how the integrating states are incorporated into the data-based representation used in DPC, translating the requirements of $p$ integrating states into the required modifications of the DPC formulation. We then propose a novel offset-free DPC formulation that incorporates an explicit constant output-disturbance model and an output disturbance observer. Numerical examples show that this formulation has similar disturbance-rejection capabilities to the velocity-form DPC, but using a smaller optimisation problem.

0.39

MSC: Multi-Stage Caster-aware Control Framework with Uncertainty-Aware NMPC and RL-based Execution Layer

cs.RO cs.LG ·2026-10-12 ·Jinho Park, Jeongtae Lee, Jeonghyeok Lim, Keun Ha Choi, Kyung-Soo Kim
published similarity 0.56
Abstract · 8 pages, 6 figures, IROS 2026

Freely swiveling casters are widely adopted in industrial AMRs/SDVs for their mechanical simplicity and load capacity. However, caster misalignment during low-speed or high-curvature maneuvers induces strong contact nonlinearities, widening the planning-execution gap between commanded $(v, ω)$ and realized motion. Existing caster-aware strategies are highly sensitive to state-estimation reliability, causing unstable execution in uncertain transition regimes. To address this, we present Multi-Stage Caster-aware Control (MSC), a planning-execution integrated hierarchical framework featuring two core mechanisms. First, an uncertainty-aware NMPC (CU-MPC) dynamically schedules caster-aware costs and input regularization using predictive uncertainty to suppress overly aggressive maneuvers. Second, a reinforcement learning-based execution layer estimates and predicts caster states under partial observability, transforming high-level velocity commands into physically executable wheel speeds adapted to current contact conditions. Validations in Isaac Sim and real robots demonstrate that MSC offers a clear comparative advantage over existing decoupled compensation approaches by significantly improving caster-state estimation accuracy, minimizing misalignment, and enhancing tracking robustness in caster-sensitive maneuvers.

0.37

Feedback-Linearised Trajectory Tracking via Model-Informed Robust Geometric DDPC

cs.RO eess.SY ·2026-11-17 ·Pranav Gupta, Deepan Muthirayan, Ravi Banavar
similarity 0.55
Abstract · This manuscript has been submitted to the 9th Annual Learning for Dynamics & Control Conference, taking place in Stockholm, Sweden, in June …

Data-driven predictive control (DDPC) predicts system responses from recorded trajectories, but nonlinear dynamics can limit the accuracy of fixed linear predictors. This paper studies geometric robust DDPC for trajectory tracking of a fully actuated manipulator using model-based feedback linearisation. A mechanical model maps virtual acceleration commands into joint torques, while recorded data capture residual dynamics arising from imperfect model parameters. The controller minimises worst-case prediction error over an open Grassmannian ball centred at the fitted trajectory subspace. Simulations on a planar 2R manipulator under gravity compare the proposed method with double-integrator model predictive control (MPC) and direct regularised data-enabled predictive control (DeePC). Results show improved tracking over double-integrator MPC despite increased torque effort, while performance relative to DeePC depends on the reference trajectory.

0.11

CS-MPC: Contraction-Certified Sampling-Based MPC for Nonlinear Systems Under Uncertainty

eess.SY cs.RO ·2026-11-13 ·Yashwanth Kumar Nakka
theoryhot direction similarity 0.55
Abstract

We present contraction-certified sampling-based model predictive control (CS-MPC) for tracking and safety of nonlinear robotic systems under parametric uncertainty, disturbances, and safety constraints that are revealed online. CS-MPC uses a contraction-certified tracking feedback inside every sampled rollout, which concentrates the rollouts around the reference, and an execution layer that verifies the applied input using a quantile-tightened discrete-time control barrier function condition. We derive a verification procedure for nonlinear contraction of the feedback-closed dynamics, and we prove a finite-sample stochastic stability bound and a mission-level probabilistic safety guarantee. We validate CS-MPC in simulation on a rover, a quadrotor, and an asteroid landing. When compared with standard model predictive path integral (MPPI) control, CS-MPC attains the same tracking error with 7 to 20 times fewer rollouts for the rover, and a 2 to 4 times lower tracking error for the quadrotor, with no safety violations in 200 Monte Carlo missions.

0.28

Ground Reaction Force-Aware Model Predictive Control for Underactuated Upright Physical Assistance

cs.RO eess.SY ·2026-11-09 ·Darren Biskup, Jeonghan Yu, Zibo Yu, Sunil K. Agrawal
top venue similarity 0.55
Abstract · Accepted for publication in IEEE Robotics and Automation Letters (RA-L), October 2026. 8 pages, 5 figures

Many rehabilitation robots execute prescribed motions using reactive tracking controllers that do not explicitly incorporate the user's instantaneous human-ground interaction. This paper presents Ground Reaction Force-Aware Model Predictive Control (GRF-MPC), a framework for upright physical assistance. By integrating live GRF and center of pressure (CoP) measurements directly into a human centroidal dynamics model, GRF-MPC formulates a real-time quadratic program (QP) that optimizes assistive forces and moments over a receding horizon. We deployed GRF-MPC on the Robotic Upright Stand Trainer (RobUST) in an underactuated 4-cable configuration and evaluated it against a fully actuated 8-cable Cartesian impedance baseline in nearly 300 trials across six healthy participants. Across tasks spanning impulsive perturbations, lunge trajectories, and voluntary limits of stability, GRF-MPC reduced peak planar center-of-mass (CoM) error by 19.6% during perturbations, lowered trajectory tracking error by 24.1%, required 28.7% less net mechanical work, and permitted a 45.9% greater normalized voluntary excursion area. The underlying QP solves in under 1 ms, comfortably enabling 100 Hz replanning and demonstrating that incorporating live human-ground interaction into predictive control yields stronger, more transparent physical assistance with half the actuators.

0.53

DR-MPC: Fast and Feasible Dynamics-Relaxed Model-Predictive Control for Legged Locomotion

cs.RO eess.SY ·2026-09-17 ·Run Wang, Alapati Tuerxun, Shuo Liu, Wei Xiao, Ján Drgoňa +2 more
code/data similarity 0.54
Abstract · 8 pages, 5 figures, submitted to RA-L

This paper presents dynamics-relaxed model predictive control (DR-MPC), a novel MPC formulation for legged locomotion, and a tailored interior-point method (IPM) solver. The formulation combines online optimization feasibility by construction with a contact-aware input parameterization. DR-MPC moves the dynamics equality and affine input constraints into quadratic penalties and retains only nonempty box constraints. The resulting box-constrained quadratic program (QP) has a block-arrow Hessian that enables the state and affine-output directions to be eliminated through a Schur complement. The solver factors only the reduced control system after swing-force elimination and contact-aligned move blocking. For the evaluated implementations using the same DR-MPC formulation, our method achieves median end-to-end MPC speedups of $16.0\times$ over HPIPM and $4.4\times$ over OSQP, with comparable locomotion performance in simulation. DR-MPC achieves a median onboard MPC end-to-end time of $4.4$ ms and is validated on a Unitree Go1 quadruped. Open-source code will be made available after publication.

0.27

Uncertainty-Aware Vision-Based Autonomous Aerial Refueling

eess.SY ·2026-10-05 ·Minhyuk Jang, Thinh Nguyen, Vivek Khatana, Sandeep Banik, Naira Hovakimyan +1 more
similarity 0.54
Abstract

Probe-and-drogue refueling (PDR) requires accurate terminal alignment of a receiver probe with an uninstrumented, dynamically moving drogue despite uncertainty in both relative-state estimation and closed-loop motion. Existing vision-based docking approaches provide relative-state estimates, but generally do not quantify estimation and operational uncertainty in a way that informs the control authority required for robust docking performance. We present an uncertainty-aware vision-based PDR docking architecture that fuses keypoint-based drogue measurements, differential GPS, and avionics in an extended Kalman filter. Split conformal calibration characterizes near-contact error in the fused probe-to-drogue displacement estimate, while a covariance-based operational uncertainty quantification designs position-dispersion limits along with corrective-command variance budgets under modeled handoff variability and disturbances. The resulting uncertainty statistics define geometric and command margins for a range-conditioned deterministic predictive controller. In high-fidelity FlightGear/JSBSim simulations with four controller variants and 50 runs per variant, the combined-margin controller achieved 45/50 centered basket-plane crossings versus 34/50 for nominal MPC. Median planar crossing error decreased from 0.231 to 0.175~$\mathrm{m}$ and the empirical 90th percentile from 0.403 to 0.286~$\mathrm{m}$, while the roll-command RMS increased from 0.22$^\circ$ to 0.48$^\circ$.

0.25