CS Paper Radar

Offset-Free Data-Driven Predictive Control: Implicit and Explicit Disturbance Formulations

Lucca Heinze Faro, Yuanbo Nie, Paul Trodden

eess.SY ·submitted 2026-11-09 16:36 UTC · v1

Abstract

Offset-free tracking is a key objective of any control algorithm. For predictive controllers with linear models, it is well understood that rejecting asymptotically-constant disturbances necessitates augmenting the prediction model with $p$ integrating states, where $p$ is the number of measured outputs. This can be achieved in model predictive control (MPC) by using a velocity form or a combination of disturbance model and observer. In data-driven predictive control (DPC), implicit incorporation of integrating states using the velocity form has been successfully adopted to obtain offset-free tracking; however, formulations based on an explicit disturbance model and observer have not yet been explored. In this paper, we first study how the integrating states are incorporated into the data-based representation used in DPC, translating the requirements of $p$ integrating states into the required modifications of the DPC formulation. We then propose a novel offset-free DPC formulation that incorporates an explicit constant output-disturbance model and an output disturbance observer. Numerical examples show that this formulation has similar disturbance-rejection capabilities to the velocity-form DPC, but using a smaller optimisation problem.

Comment
6 pages, 3 figures. Submitted to ECC 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Stochastic Data-driven Predictive Control of Linear Systems with Sub-Gaussian Disturbances using Causal Predictors

eess.SY ·2026-09-22 ·Johannes Teutsch, Marion Leibold
published similarity 0.64
Abstract · This manuscript is a revised version of the article published in IFAC Journal of Systems and Control (2026), vol. 25, pp. 100399. It contain…

We present a stochastic data-driven predictive control (DPC) framework for discrete-time linear time-invariant systems subject to sub-Gaussian additive disturbances based solely on input--output data. In contrast to related methods that rely on exact disturbance data or at least sample generation for closed-loop guarantees, the proposed approach leverages a disturbance data estimate. By enforcing consistency of the disturbance data estimate with the available input--output data and system class, we first identify data-driven and provably causal subspace predictors for use in DPC. Then, we analyze statistical properties of the corresponding prediction error, yielding tightened constraints for the nominal predictions that guarantee satisfaction of chance constraints. The proposed DPC scheme comes with guarantees on recursive feasibility and conditional chance constraint satisfaction in closed-loop under standard assumptions. A numerical evaluation study demonstrates the performance of the proposed controller.

0.52

Model-Based Disturbance Rejection via Sliding-Mode Control: Continuous-Time Formulation and Proper Implicit Discretization

eess.SY ·2026-10-02 ·Benedikt Andritsch, Stefan Koch, Jaime A. Moreno
theory similarity 0.64
Abstract · preprint submitted to Automatica

We propose a robust exact sliding-mode controller for reference tracking with model-based disturbance rejection, where the disturbance is generated by a linear time-invariant model driven by a bounded input and may be bidirectionally coupled with the plant. The controller embeds the internal model principle and its error dynamics mirror those of the robust exact differentiator, ensuring finite-time convergence. We develop a proper implicit discretization for sampled-data implementation that preserves stability and accuracy. In the nominal case, which contains a disturbance generated by a $p$-th order integrator chain, the method achieves a control accuracy of $T^{p+1}\bar D$, with discretization time $T$ and disturbance bound $\bar D$. This accuracy is shown to relate to the fundamental lower bound by a factor depending only on the order of the disturbance model. Simulations demonstrate the efficacy of the proposed methods.

0.46

DeoPC: Data-Enabled Output-Feedback Predictive Control for State Regulation

eess.SY math.DS ·2026-11-19 ·Jingyuan Li, Dawei Shi, Ling Shi
similarity 0.63
Abstract · 14 pages, 4 figures

Constrained regulation of the internal state of an unknown linear system is challenging when only input-output measurements are available online. In this work, we develop a data-enabled output-feedback predictive control (DeoPC) framework for constrained state regulation using input-output data. Specifically, a data-driven state estimate is constructed from past input-output data via a subspace-based singular value decomposition. Based on this state representation, we formulate a predictive controller that directly penalizes the state and control effort while enforcing the system constraints. Under persistent excitation and initialization conditions, we establish recursive feasibility and closed-loop stability of DeoPC in both noise-free and bounded-noise settings. In addition, we show that DeoPC can be calibrated to the physical state coordinates using a few offline state measurements, or treated as a model predictive control tuning problem when no state measurements are available. The effectiveness of DeoPC is demonstrated through simulations on an unstable batch reactor system.

0.27

Feedback-Linearised Trajectory Tracking via Model-Informed Robust Geometric DDPC

cs.RO eess.SY ·2026-11-17 ·Pranav Gupta, Deepan Muthirayan, Ravi Banavar
similarity 0.63
Abstract · This manuscript has been submitted to the 9th Annual Learning for Dynamics & Control Conference, taking place in Stockholm, Sweden, in June …

Data-driven predictive control (DDPC) predicts system responses from recorded trajectories, but nonlinear dynamics can limit the accuracy of fixed linear predictors. This paper studies geometric robust DDPC for trajectory tracking of a fully actuated manipulator using model-based feedback linearisation. A mechanical model maps virtual acceleration commands into joint torques, while recorded data capture residual dynamics arising from imperfect model parameters. The controller minimises worst-case prediction error over an open Grassmannian ball centred at the fitted trajectory subspace. Simulations on a planar 2R manipulator under gravity compare the proposed method with double-integrator model predictive control (MPC) and direct regularised data-enabled predictive control (DeePC). Results show improved tracking over double-integrator MPC despite increased torque effort, while performance relative to DeePC depends on the reference trajectory.

0.23

A Unified Framework for Robust Data-Driven Model Predictive Control with Terminal Ingredients

eess.SY ·2026-10-04 ·Zhaohua Yang, Nan Bai, Pengyu Wang, Ling Shi
similarity 0.60
Abstract · Submitted for publication

This paper proposes a unified framework for robust data-driven model predictive control (MPC) with terminal ingredients for unknown linear time-invariant systems. Based on Willems' fundamental lemma, a single offline input-output trajectory is used as an implicit model, while online implementation only requires past input-output measurements. Bounded measurement noise is considered in both offline and online output data. The framework consists of an offline stage, where robust terminal ingredients are designed directly from noisy data, and an online stage, where these ingredients are incorporated into a one-step MPC scheme. Recursive feasibility of the proposed framework and practical exponential stability of the closed-loop system are established. Numerical results illustrate the performance tuning capability of the terminal set, with particularly pronounced benefits for short prediction horizons, and show that the proposed framework achieves performance comparable to data-driven MPC without terminal ingredients while requiring a reduced prediction horizon and less online computation.

0.13

Quantile-Based Command-Reserve MPC for Current-Command Gimbal Pointing

cs.RO eess.SY ·2026-10-26 ·Yaokun Lu, Yifan Li, Enmei Wang, Hao Teng, Pengwei Hu +1 more
similarity 0.58
Abstract · 10 pages, 4 figures. Supplementary hardware trial data and recomputation scripts included as ancillary files. Submitted to Journal of the Fr…

This paper studies the constrained line-of-sight pointing control problem of a two-axis current-command gimbal subjected to mismatched mechanical disturbances. Friction, torque ripple, current-response lag, model mismatch, and limited drive commands make accurate pointing more challenging yet interesting. A quantile disturbance predictor is proposed to compensate predictable acceleration residuals and describe their remaining uncertainty, with the aid of learning median and outer quantiles from state, command, and reference histories. A tube-inspired model predictive controller is proposed to reserve command headroom according to prediction uncertainty, with the aid of calibrated radii and stage-dependent input margins. The median improves the nominal prediction, while the radius adapts the command reserve without adding optimization variables. A finite-horizon tube inclusion result is established for a specified linear error model and fixed ancillary policy; its conditions are distinguished from the approximations used in hardware. Native command bounds and a final command limiter keep the sent commands within their prescribed range. On a two-axis embedded platform, four controller configurations are compared in seven repeated trials each. The proposed configuration achieves a two-dimensional pointing root-mean-square error of $3.94 \pm 0.10$ mrad with no command-limit samples in the evaluation windows. Its performance supports the combined use of residual prediction and adaptive command margins in the tested operating condition. Solver times and logged loop overruns are reported separately for the nominal 100 Hz implementation.

0.40

Fundamental Limits of Data-Driven Predictive Control

eess.SY ·2026-11-11 ·Jiabao He, Feiran Zhao, Yushan Li, Yue Ju, Florian Dörfler +1 more
benchmarktheoryhot direction similarity 0.58
Abstract

Data-driven predictive control (DDPC) has attracted substantial interest, and many variants have been proposed; however, comparatively less is known about the statistical closed-loop performance of these methods and the fundamental limits they are subject to. In this contribution, we apply the statistical decision framework developed in our earlier work to study fundamental limits of DDPC. The performance of a data-driven controller is measured by its risk, the expected deterioration in control performance relative to an oracle model-based controller at a given system, and by its total risk that measures the overall performance across all systems of interest. Lower bounds on these risks are derived using the bias-variance decomposition and the Cramer-Rao inequality. In particular, a lower bound on the total risk is obtained by a calculus-of-variations method. This bound applies to any DDPC design, thereby quantifying unavoidable performance limitations and providing a benchmark for assessing existing DDPC methods. In an illustrative example, we compare the risks of certainty-equivalence model predictive control, subspace predictive control, and data-enabled predictive control with the derived lower bounds, providing a quantitative performance assessment of these methods and some guidance on tuning regularization parameters in DDPC.

0.26

Data-Driven Output Regulation via Predictive Control

eess.SY ·2026-11-13 ·Wenjie Liu, Gang Wang, Lihua Xie
similarity 0.57
Abstract

This paper addresses constrained output regulation for unknown linear systems by means of predictive control directly from input-output data. The objective is to reject disturbances and track references generated by a known exosystem, without identifying a plant model or solving the output regulator equations. The first step is a trajectory parametrization for plants driven by exosignals with known dynamics. % By exploiting the known exosystem eigenstructure, Willems et al's fundamental lemma is extended from autonomous input-output trajectories to trajectories coupled with exogenous modes. By exploiting the known exosystem eigenstructure, input-output trajectories driven by an exosignal of known phase are parametrized directly from data, which contains the affine version of Willems et al.'s fundamental lemma as a special case. This parametrization yields a nominal data-driven predictive control (DDPC) regulator, for which a Lyapunov argument proves exponential convergence to the regulator manifold. For periodic exosignals, the steady-state feedforward input is eliminated from the online problem through an incremental-input regularization, leading to an implementable regulator based on measured data and known exosystem information. Bounded output noise is handled by slack and coefficient regularization, with a regularization center computed offline from data; the resulting robust DDPC law is recursively feasible and practically stabilizing, with an ultimate regulation error that vanishes with the noise bound. A constrained lateral vehicle-control example with periodic road curvature illustrates disturbance rejection, input-constraint satisfaction, and the transition from exact regulation with noise-free data to practical regulation with noisy data.

0.29