CS Paper Radar

Model-Based Disturbance Rejection via Sliding-Mode Control: Continuous-Time Formulation and Proper Implicit Discretization

Benedikt Andritsch, Stefan Koch, Jaime A. Moreno

eess.SY ·submitted 2026-10-02 06:31 UTC · v1
theory

Abstract

We propose a robust exact sliding-mode controller for reference tracking with model-based disturbance rejection, where the disturbance is generated by a linear time-invariant model driven by a bounded input and may be bidirectionally coupled with the plant. The controller embeds the internal model principle and its error dynamics mirror those of the robust exact differentiator, ensuring finite-time convergence. We develop a proper implicit discretization for sampled-data implementation that preserves stability and accuracy. In the nominal case, which contains a disturbance generated by a $p$-th order integrator chain, the method achieves a control accuracy of $T^{p+1}\bar D$, with discretization time $T$ and disturbance bound $\bar D$. This accuracy is shown to relate to the fundamental lower bound by a factor depending only on the order of the disturbance model. Simulations demonstrate the efficacy of the proposed methods.

Comment
preprint submitted to Automatica

Closest papers

Nearest neighbours by meaning across the whole index.

Implicit discretization of PID-like sliding-mode control with third-order output accuracy

eess.SY ·2026-11-13 ·Martin Zapf, Benedikt Andritsch, Leonid Fridman, Martin Horn
code/data similarity 0.78
Abstract · Extended version of a paper submitted to Automatica. 20 pages, 3 figures, 2 tables. Code and verification records: https://github.com/Martin…

A digital PID-like sliding-mode controller is proposed for a double integrator with a Lipschitz matched disturbance. A proper implicit discretization, matched to the exact sampled dynamics of the plant, attains the accuracy of the continuous-time controller without discretization chattering. Global finite-step convergence to a discrete-time sliding mode is established for two gain designs and every sampling time, using an implicit Lyapunov function and a computer-assisted certificate in exact arithmetic. The resulting controller provides third-order output accuracy, second-order accuracy for its derivative, and exact finite-time rejection of constant matched disturbances. These accuracy orders are proved to be optimal among deterministic causal controllers using the same sampled information.

0.33

Offset-Free Data-Driven Predictive Control: Implicit and Explicit Disturbance Formulations

eess.SY ·2026-11-09 ·Lucca Heinze Faro, Yuanbo Nie, Paul Trodden
similarity 0.64
Abstract · 6 pages, 3 figures. Submitted to ECC 2027

Offset-free tracking is a key objective of any control algorithm. For predictive controllers with linear models, it is well understood that rejecting asymptotically-constant disturbances necessitates augmenting the prediction model with $p$ integrating states, where $p$ is the number of measured outputs. This can be achieved in model predictive control (MPC) by using a velocity form or a combination of disturbance model and observer. In data-driven predictive control (DPC), implicit incorporation of integrating states using the velocity form has been successfully adopted to obtain offset-free tracking; however, formulations based on an explicit disturbance model and observer have not yet been explored. In this paper, we first study how the integrating states are incorporated into the data-based representation used in DPC, translating the requirements of $p$ integrating states into the required modifications of the DPC formulation. We then propose a novel offset-free DPC formulation that incorporates an explicit constant output-disturbance model and an output disturbance observer. Numerical examples show that this formulation has similar disturbance-rejection capabilities to the velocity-form DPC, but using a smaller optimisation problem.

0.39

Bifurcation Beyond Surface-Tangential Asymptotic Convergence in Continuous Sliding Mode Control

eess.SY ·2026-09-17 ·Fan Zhang, Jingwen Xu, Peng Li, Jun Zhou, Yaohua Guo
unusual similarity 0.58
Abstract · 13 pages, 5 figures

For second-order systems under continuous sliding mode control (SMC), the literature has long relied, largely through phase-portrait illustrations, on the implicit convention that the phase-plane trajectory approaches the equilibrium along a direction tangential to the designed sliding surface. This paper investigates this tangential convergence assumption through a rigorous phase-plane analysis of the double-integrator system subject to standard linear SMC. We reveal that the asymptotic state ratio is not unique but instead exhibits a bifurcation that depends on the control gains, the sliding surface parameter, and the initial conditions. The key finding is that the system may converge along an implicit secondary manifold rather than aligning with the designed sliding surface, implying that smooth entry is not globally guaranteed. We derive closed-form expressions for the convergence ratios and establish a classification framework that precisely characterizes when the smooth-entry assumption holds and when it fails. The analysis is further extended to classical PD control, and we show that the bifurcation threshold coincides with the critical damping boundary that separates the two convergence regimes. These findings bridge terminal geometry and convergence smoothness, providing a predictive framework for high-performance motion control design. Simulation results validate the proposed classification of convergence regimes.

0.27

Control-Oriented Learning for Dynamic Tracking and Stability Analysis of Soft Pneumatic Actuators

cs.RO ·2026-08-25 ·Nithin S. Kumar, Eric J. Barth
similarity 0.56
Abstract · 8 pages, 10 figures

Soft pneumatic actuators offer inherent compliance and safe interaction but remain difficult to model and control because of their highly nonlinear, distributed dynamics. We present a control-oriented data-driven modeling and control framework that decomposes actuator behavior into a nonlinear static equilibrium model and a linear residual dynamics model identified using Extended Dynamic Mode Decomposition with control (EDMDc). This representation enables feedforward compensation, task-space feedback control, and local closed-loop stability analysis through an augmented linear model. Experiments achieve approximately 1 mm root mean square error (RMSE) during low-speed (approximately 10 mm/s) trajectory tracking and below 10 mm RMSE at higher speeds (approximately 100 mm/s). The framework further achieves stable tracking of highly dynamic user-generated references with peak accelerations exceeding 25 m/s^2 while simultaneously performing real-time obstacle avoidance. Finally, the proposed stability analysis is experimentally validated by accurately predicting stable, marginal, and unstable operating regimes. These results demonstrate that structured, control-oriented learning provides an accurate and practical framework for soft actuator control.

0.37

Fast Sampling or High Gain? iP versus PI Control

eess.SY ·2026-11-09 ·Mohamed Camil Belhadjoudja
similarity 0.56
Abstract · Submitted to IEEE ECC 2027

Intelligent proportional (iP) controllers, introduced in the framework of model-free control, are often presented as an alternative to proportional-integral (PI) controllers that requires no model of the plant. This paper studies this property for a first-order linear plant under sampled-data implementation with a zero-order hold. When the time derivative of the output is estimated by a backward difference, the discrete-time iP and PI controllers are known to obey the same control law under a one-to-one correspondence between their parameters. Building on this correspondence, the paper derives necessary and sufficient conditions for exponential stability of the iP closed loop, in closed form, in terms of the controller parameters KP and alpha, the sampling period h, and the plant parameters. It then shows that, when the iP parameters are held fixed and the sampling period tends to zero, the closed-loop decay rate tends to the iP gain KP, provided that KP is positive and that the ratio rho between the input gain of the plant and alpha satisfies 0 < rho < 2. One closed-loop pole then behaves as 1 - h KP, while the other tends to 1 - rho. With fixed PI gains, by contrast, the decay rate tends to that of the continuous-time PI loop, which depends on the plant parameters. The two parametrizations therefore suggest different tuning procedures, although they achieve the same closed loops at every fixed sampling period. High gain for the PI is, in some sense, replaced by fast sampling of the iP. The results also make explicit which plant information the iP controller requires: the sign of the input gain and a bound on its magnitude in the limit of fast sampling, and bounds on both plant parameters at a given sampling period. Numerical experiments illustrate these results.

0.44

Appointed-Time Fault-Tolerant Fast Terminal Sliding Control for UAVs with a Tracking Error-Based Disturbance Observer

cs.AI ·2026-10-31 ·Jinfa Li, Sheng Xu, Yanjie Wu, Chengyue Su
similarity 0.56
Abstract

This paper addresses the critical challenge of high-performance fault-tolerant tracking control for quadrotor UAVs under complex conditions including external disturbances, parameter uncertainties, and actuator faults. A synergistic control framework is proposed by decoupling the system into position and attitude loops, each governed by the following three innovations. First, an Appointed-Time Prescribed Performance Function (AT-PPF) is developed to strictly constrain the tracking error within a predefined funnel boundary, ensuring convergence within a fixed time regardless of initial conditions. Second, a Tracking Error-Based Fixed-Time Composite Disturbance Observer (TFxTCDO) is developed to enable fast and accurate estimation of lumped disturbances without requiring full-state information or precise system modeling. This observer directly couples disturbance estimation with the control objective, thereby enhancing robustness and convergence. Third, a Fast Second-Order Terminal Sliding Mode Controller (NFSO-TSMC) is designed to achieve faster convergence and effective chattering mitigation. Simulation results demonstrate that the proposed control strategy significantly outperforms conventional methods in terms of tracking accuracy, fault recovery speed, and robustness against uncertainties.

0.21

Stability-aware Residual Reinforcement Learning Framework for Robotic Manipulator Disturbance Compensation

cs.RO ·2026-09-18 ·Jihong Kim, Joonhyuk Kwon, Hwa Soo Kim, TaeWon Seo, Hyung-Tae Seo
similarity 0.55
Abstract · 14 pages, 9 figures

Although conventional controllers and disturbance observers (DOBs) are the standard for precision tracking in manipulators, they suffer from parameter uncertainty, nonlinear friction, and compound disturbances. This study proposes a residual reinforcement learning DOB framework that pairs an analytical observer with an RL policy. The deterministic baseline operates within a reliable region, whereas the RL policy explicitly targets the residuals that the model cannot capture. To make this compensation disturbance-aware, an estimator network aligns the observation history with a privileged disturbance context, organizing the latent space by disturbance regime and enabling rapid adaptation across disturbance transitions. To guarantee stability, we derived and enforced a state-dependent action bound on the RL policy from an input-to-state stability (ISS) analysis such that the closed loop provably confines the tracking error to a certified envelope for arbitrary policy outputs. Experiments on a 6-DOF manipulator demonstrated consistent improvements in disturbance estimation and tracking, including a 27.8% tracking-error reduction on real hardware under zero-shot sim-to-real transfer and a 38.0% reduction under a base-vibration disturbance that was not observed during training.

0.24

Partial-State Deadzone-Adapted Disturbance Suppression Control For Strict-Feedback Systems

eess.SY math.OC ·2026-10-05 ·Iasson Karafyllis, Alexandros Aslanidis, Miroslav Krstic
similarity 0.55
Abstract · 69 pages, 3 figures

In this paper we provide an extension of the partial-state Deadzone-Adapted Disturbance Suppression (DADS) adaptive control scheme in the case of strict-feedback systems. We study two cases: the cases of strict-feedback systems with and without integrators. The DADS controller achieves attenuation of the output to an assignable small level, despite the presence of (time-varying) disturbances, unknown (time-varying) parameters and unknown (time-varying) input coefficients; all of them with arbitrary and unknown bounds. The mechanism that makes DADS work is the same in all previously studied cases where DADS has been applied: the update law "pumps up" the nonlinear controller gain to a sufficient size, adapting the gain to the unknown uncertainties, and shuts off further pumping up of the gain once the output is in the residual set. The results are directly extended to the infinite-dimensional case. Two simple examples are provided: one finite-dimensional example and one infinite-dimensional example. The finite-dimensional example is used for a detailed comparison with existing results in the literature.

0.25