CS Paper Radar

Implicit discretization of PID-like sliding-mode control with third-order output accuracy

Martin Zapf, Benedikt Andritsch, Leonid Fridman, Martin Horn

eess.SY ·submitted 2026-11-13 07:50 UTC · v1
code/data

Abstract

A digital PID-like sliding-mode controller is proposed for a double integrator with a Lipschitz matched disturbance. A proper implicit discretization, matched to the exact sampled dynamics of the plant, attains the accuracy of the continuous-time controller without discretization chattering. Global finite-step convergence to a discrete-time sliding mode is established for two gain designs and every sampling time, using an implicit Lyapunov function and a computer-assisted certificate in exact arithmetic. The resulting controller provides third-order output accuracy, second-order accuracy for its derivative, and exact finite-time rejection of constant matched disturbances. These accuracy orders are proved to be optimal among deterministic causal controllers using the same sampled information.

Comment
Extended version of a paper submitted to Automatica. 20 pages, 3 figures, 2 tables. Code and verification records: https://github.com/MartinZapf/Implicit-PID-like

Closest papers

Nearest neighbours by meaning across the whole index.

Model-Based Disturbance Rejection via Sliding-Mode Control: Continuous-Time Formulation and Proper Implicit Discretization

eess.SY ·2026-10-02 ·Benedikt Andritsch, Stefan Koch, Jaime A. Moreno
theory similarity 0.78
Abstract · preprint submitted to Automatica

We propose a robust exact sliding-mode controller for reference tracking with model-based disturbance rejection, where the disturbance is generated by a linear time-invariant model driven by a bounded input and may be bidirectionally coupled with the plant. The controller embeds the internal model principle and its error dynamics mirror those of the robust exact differentiator, ensuring finite-time convergence. We develop a proper implicit discretization for sampled-data implementation that preserves stability and accuracy. In the nominal case, which contains a disturbance generated by a $p$-th order integrator chain, the method achieves a control accuracy of $T^{p+1}\bar D$, with discretization time $T$ and disturbance bound $\bar D$. This accuracy is shown to relate to the fundamental lower bound by a factor depending only on the order of the disturbance model. Simulations demonstrate the efficacy of the proposed methods.

0.46

Bifurcation Beyond Surface-Tangential Asymptotic Convergence in Continuous Sliding Mode Control

eess.SY ·2026-09-17 ·Fan Zhang, Jingwen Xu, Peng Li, Jun Zhou, Yaohua Guo
unusual similarity 0.56
Abstract · 13 pages, 5 figures

For second-order systems under continuous sliding mode control (SMC), the literature has long relied, largely through phase-portrait illustrations, on the implicit convention that the phase-plane trajectory approaches the equilibrium along a direction tangential to the designed sliding surface. This paper investigates this tangential convergence assumption through a rigorous phase-plane analysis of the double-integrator system subject to standard linear SMC. We reveal that the asymptotic state ratio is not unique but instead exhibits a bifurcation that depends on the control gains, the sliding surface parameter, and the initial conditions. The key finding is that the system may converge along an implicit secondary manifold rather than aligning with the designed sliding surface, implying that smooth entry is not globally guaranteed. We derive closed-form expressions for the convergence ratios and establish a classification framework that precisely characterizes when the smooth-entry assumption holds and when it fails. The analysis is further extended to classical PD control, and we show that the bifurcation threshold coincides with the critical damping boundary that separates the two convergence regimes. These findings bridge terminal geometry and convergence smoothness, providing a predictive framework for high-performance motion control design. Simulation results validate the proposed classification of convergence regimes.

0.27

Profile-Anchored Control: Velocity Shaping with Exact Disturbance Rejection and Transient-Free Replanning

eess.SY math.OC ·2026-11-19 ·Christian Fredrik Sætre, Morten Dinhoff Pedersen
theory similarity 0.54
Abstract

In many motion-control problems, how a target is approached matters as much as whether it is reached: speed and deceleration must stay within actuator, safety or comfort limits despite unknown loads and disturbances. Position-dependent velocity profiles provide a natural way to describe such requirements. We show that the square of such a profile can be used both to plan the motion and to construct the controller that executes it. Our main result, profile-anchored control with exact rejection (PACER), recovers the nominal motion after a finite time under an unknown gain and load, and then allows the profile to be replaced mid-motion without a transient. It combines a static law for scalar second-order systems with a dynamic law for first-order ones, used for disturbance rejection. The static law guarantees uniform global asymptotic stability under an unknown input gain with a known lower bound, and finite-time stability under local homogeneity, while the first-order law gives analogous guarantees under disturbances of bounded rate and provides the exact rejection in PACER. Replanning of a profile under speed, acceleration and jerk limits can be formulated as a convex program. The approach is illustrated on a simulated elevator.

0.25

Offset-Free Data-Driven Predictive Control: Implicit and Explicit Disturbance Formulations

eess.SY ·2026-11-09 ·Lucca Heinze Faro, Yuanbo Nie, Paul Trodden
similarity 0.53
Abstract · 6 pages, 3 figures. Submitted to ECC 2027

Offset-free tracking is a key objective of any control algorithm. For predictive controllers with linear models, it is well understood that rejecting asymptotically-constant disturbances necessitates augmenting the prediction model with $p$ integrating states, where $p$ is the number of measured outputs. This can be achieved in model predictive control (MPC) by using a velocity form or a combination of disturbance model and observer. In data-driven predictive control (DPC), implicit incorporation of integrating states using the velocity form has been successfully adopted to obtain offset-free tracking; however, formulations based on an explicit disturbance model and observer have not yet been explored. In this paper, we first study how the integrating states are incorporated into the data-based representation used in DPC, translating the requirements of $p$ integrating states into the required modifications of the DPC formulation. We then propose a novel offset-free DPC formulation that incorporates an explicit constant output-disturbance model and an output disturbance observer. Numerical examples show that this formulation has similar disturbance-rejection capabilities to the velocity-form DPC, but using a smaller optimisation problem.

0.30

Fast Sampling or High Gain? iP versus PI Control

eess.SY ·2026-11-09 ·Mohamed Camil Belhadjoudja
similarity 0.52
Abstract · Submitted to IEEE ECC 2027

Intelligent proportional (iP) controllers, introduced in the framework of model-free control, are often presented as an alternative to proportional-integral (PI) controllers that requires no model of the plant. This paper studies this property for a first-order linear plant under sampled-data implementation with a zero-order hold. When the time derivative of the output is estimated by a backward difference, the discrete-time iP and PI controllers are known to obey the same control law under a one-to-one correspondence between their parameters. Building on this correspondence, the paper derives necessary and sufficient conditions for exponential stability of the iP closed loop, in closed form, in terms of the controller parameters KP and alpha, the sampling period h, and the plant parameters. It then shows that, when the iP parameters are held fixed and the sampling period tends to zero, the closed-loop decay rate tends to the iP gain KP, provided that KP is positive and that the ratio rho between the input gain of the plant and alpha satisfies 0 < rho < 2. One closed-loop pole then behaves as 1 - h KP, while the other tends to 1 - rho. With fixed PI gains, by contrast, the decay rate tends to that of the continuous-time PI loop, which depends on the plant parameters. The two parametrizations therefore suggest different tuning procedures, although they achieve the same closed loops at every fixed sampling period. High gain for the PI is, in some sense, replaced by fast sampling of the iP. The results also make explicit which plant information the iP controller requires: the sign of the input gain and a bound on its magnitude in the limit of fast sampling, and bounds on both plant parameters at a given sampling period. Numerical experiments illustrate these results.

0.34

Incremental Stability and Convergence Properties of Discrete-Time Projected Control Systems

eess.SY ·2026-09-17 ·Riccardo Bertollo, Sebastiaan van den Eijnden, Maurice Heemels
published similarity 0.52
Abstract

Projection-based controllers can overcome fundamental limitations of classical linear time-invariant control by modifying the controller's input-output behavior via projection. A key example is given by the hybrid integrator-gain system, a projected integrator, which has recently found successful application in several industrial systems. While prior work on analysis and design of projection-based control systems has primarily focused on the continuous-time setting and non-incremental analysis, a more refined incremental analysis in discrete-time is needed to better reflect actual digital implementation and obtain more accurate (robust) performance assessment. To address this need, this paper considers incremental stability and convergence analysis of discrete-time projection-based control systems. Our first methodology is based on showing that such controllers preserve the quadratic incremental stability of their nominal (unprojected) dynamics, if the projection metric is well-designed. Building on this, we derive a small-gain condition guaranteeing incremental input-to-state stability for interconnections of projected controllers with general nonlinear plants. A second approach is grounded in a direct Lyapunov-based method for verifying incremental stability in input-affine piecewise-smooth systems, which can be seen as an extension of the classical discrete-time Demidovic conditions. We illustrate our results through several examples, and demonstrate performance quantification via nonlinear Bode plots, with a special focus on first-order projection elements.

0.34

Velocity-Free Funnel Control of Euler-Lagrange Systems: An Artificial-Delay Approach

eess.SY ·2026-11-12 ·Chayan Kumar Paul, Pushpak Jagtap
similarity 0.51
Abstract

Classical funnel control keeps the tracking error within a prescribed, time-varying envelope by increasing the feedback gain as the error approaches the boundary. For mechanical systems, this guarantee typically relies on velocity measurements. We show that it can be retained for fully actuated Euler--Lagrange systems using only position measurements. The proposed controller replaces the velocity error with a difference quotient of the position error over a fixed delay, while preserving the classical unbounded gain. It requires no plant model, reference derivatives, observer, or filter states. The central challenge is to reconcile the averaging inherent in delayed feedback with a gain that can grow without bound near the funnel boundary. We resolve this by establishing an a priori bound on the gain along closed-loop trajectories, independent of the delay. This bound yields a computable delay threshold that guarantees tracking within the prescribed funnel and boundedness of all closed-loop signals. The threshold depends only on bounds on the inertia, forces, and reference. Simulations demonstrate tracking accuracy comparable to full-state funnel control and tolerance of delays substantially longer than certified. With quantized position measurements, the controller also requires substantially less torque than an existing derivative-free funnel controller.

0.30

Output-Feedback Integral Sliding-Mode Extremum Seeking with Super-Twisting Differentiation

eess.SY ·2026-11-05 ·Hyuntae Kim
benchmark similarity 0.51
Abstract · 14 pages, 3 figures, 6 tables. Submitted to Automatica. Substantially extended from a paper presented at the 23rd IFAC World Congress, 2026

This paper develops a dither-free output-feedback extremum-seeking controller for pre-stabilized nonlinear dynamic systems with unknown steady-state performance maps. The controller uses only the measured performance, the applied parameter, and internal states. Within a local state--parameter domain, integral sliding mode enforces equality between the applied parameter rate and a prescribed nonzero search velocity after finite-time capture under bounded matched rate-channel perturbations. This motion lets a super-twisting differentiator and rate normalization recover a gradient-sign surrogate without demodulation or averaging. A ramp-corrected moving-equilibrium coordinate cancels the first-order ramp-induced plant term and yields explicit flow, reversal, recovery, and dynamic-remainder bounds. The resulting local state--parameter tube supplies the regularity needed for finite-time exact differentiation. Combined with a deadbanded hybrid relay, these results establish local practical convergence to an explicit neighborhood of the unknown optimum. An 80-state tubular-reactor benchmark and paired held-out Monte Carlo tests compare a causal sampled realization with perturbation ESC and a rate-informed super-twisting comparator. The proposed realization succeeds in all 200 held-out cases and attains the smallest upper-tail objective gap under the stated tuning protocol. A matched-rate sweep connects performance degradation to applied-rate mismatch, near-stall motion, reversal, and regularization attenuation.

0.29