CS Paper Radar

Physics-Informed and Data-Driven Composite Disturbance Separation and Predictive Control for Airborne Electro-Optical Gimbals with Multiple Constraints

Yaokun Lu, Yifan Li, Zhixuan Zhang, Enmei Wang, Hao Teng, Jianzhong Qiao

cs.RO eess.SY ·submitted 2026-10-26 05:06 UTC · v1

Abstract

This paper studies the constrained pointing control problem of airborne electro-optical gimbals subjected to composite periodic and aperiodic disturbances. Under carrier vibration, input delay, and actuator constraints, achieving line-of-sight stabilization and tracking is challenging. A disturbance-separated model predictive control (MPC) scheme is proposed to compensate these heterogeneous disturbances according to their physical characteristics. An adaptive periodic observer predicts multi-harmonic vibrations over the MPC horizon using linear-regression frequency estimation. A linear observer estimates the aperiodic disturbance, and a bounded long short-term memory (LSTM) network predicts its change over the input delay. Embedding periodic predictions into the MPC model while applying aperiodic compensation outside the optimizer limits amplification of aperiodic estimation errors and improves pointing accuracy under frequency changes and parameter mismatch. On the stated headroom envelope, input-set tightening provides feasible commands within the prescribed limits, and a regional practical tracking bound is established under explicit input-sequence and predicted-state margin conditions. A UAV-mounted two-axis gimbal platform is assembled for comparative indoor hovering experiments, complemented by simulations under frequency changes and parameter mismatch. In the reported trials, the proposed method achieves yaw and pitch relative-angle root-mean-square errors (RMSEs) of 0.770 degrees and 0.350 degrees, reducing tracking errors by 25.1% and 45.9% compared with linear active disturbance rejection control.

Comment
20 pages, 8 figures. Includes supplementary derivations and proofs. Demonstration video included as an ancillary file

Closest papers

Nearest neighbours by meaning across the whole index.

Quantile-Based Command-Reserve MPC for Current-Command Gimbal Pointing

cs.RO eess.SY ·2026-10-26 ·Yaokun Lu, Yifan Li, Enmei Wang, Hao Teng, Pengwei Hu +1 more
similarity 0.59
Abstract · 10 pages, 4 figures. Supplementary hardware trial data and recomputation scripts included as ancillary files. Submitted to Journal of the Fr…

This paper studies the constrained line-of-sight pointing control problem of a two-axis current-command gimbal subjected to mismatched mechanical disturbances. Friction, torque ripple, current-response lag, model mismatch, and limited drive commands make accurate pointing more challenging yet interesting. A quantile disturbance predictor is proposed to compensate predictable acceleration residuals and describe their remaining uncertainty, with the aid of learning median and outer quantiles from state, command, and reference histories. A tube-inspired model predictive controller is proposed to reserve command headroom according to prediction uncertainty, with the aid of calibrated radii and stage-dependent input margins. The median improves the nominal prediction, while the radius adapts the command reserve without adding optimization variables. A finite-horizon tube inclusion result is established for a specified linear error model and fixed ancillary policy; its conditions are distinguished from the approximations used in hardware. Native command bounds and a final command limiter keep the sent commands within their prescribed range. On a two-axis embedded platform, four controller configurations are compared in seven repeated trials each. The proposed configuration achieves a two-dimensional pointing root-mean-square error of $3.94 \pm 0.10$ mrad with no command-limit samples in the evaluation windows. Its performance supports the combined use of residual prediction and adaptive command margins in the tested operating condition. Solver times and logged loop overruns are reported separately for the nominal 100 Hz implementation.

0.40

Nonlinear Model Predictive Control via Sequential Convex Programming for Drone-to-Drone Docking

cs.RO ·2026-08-11 ·Neeraj Balachandar, Shriram Hari, Vishnu R. Unni
published similarity 0.57
Abstract · Accepted at IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) 2026

Autonomous mid-air docking of multi-rotor vehicles under disturbance-driven target motion poses a constrained non-linear trajectory optimization challenge. This work formulates the docking task as a finite-horizon optimal control problem based on a reduced-order nonlinear model augmented with disturbance states. The resulting problem is solved using sequential convex programming within a receding-horizon framework to generate dynamically feasible docking trajectories. State estimation with noisy measurements is incorporated to enable robust relative motion prediction, while trajectory execution is validated in a high-fidelity rigid-body MuJoCo simulation environment. The proposed framework is evaluated for stationary and constant-velocity target motions, demonstrating reliable convergence to the docking interface while satisfying geometric capture constraints. Quantitatively, the method maintains negligible docking-cone violations and terminal state errors within prescribed tolerances, and achieves consistent, safe docking performance for cone half-angles as low as 10 degrees. Robust operation is observed for wind disturbance levels up to a standard deviation of 0.5, while preserving bounded approach velocities and stable control effort. These results demonstrate the effectiveness of the SCP-based trajectory optimization framework for disturbance-robust aerial docking under estimation uncertainty.

0.22

Estimation-Aware Control on Quadrotor State Manifolds via Anisotropic Covariance Filtering

eess.SY ·2026-11-11 ·Daniel Engelsman, Itzik Klein
similarity 0.56
Abstract · 11 Pages, 14 Figures, 2 Tables

Conventional nonlinear flight controllers operate under the implicit assumption of reliable, high-confidence state feedback. During transient sensing degradation or partial unobservability, state estimation uncertainty is frequently misinterpreted as physical tracking error, triggering aggressive and parasitic corrective inputs. To mitigate this vulnerability, we propose a generalized Estimation-Aware (EA) control framework that directly incorporates real-time estimator confidence into control execution. By mapping the posterior error covariance $\mathbf{P}_{k\mid k}$ into an uncertainty-dependent modulation operator, the EA mechanism dynamically scales feedback authority, performing anisotropic attenuation along weakly observed state directions to prevent false error corrections. Validated across six distinct control paradigms, the proposed approach demonstrates substantial performance gains across all baselines. In particular, when integrated into an Incremental Nonlinear Dynamic Inversion (INDI) architecture, the EA mechanism reduces tracking and estimation errors by 24.34% and 33.24%, respectively, at a high flight speed of 10 m/s.

0.26

Onboard Wind-Preview Model Predictive Control Using Pitot-Static Sensing for Multirotor UAVs

cs.RO ·2026-09-25 ·Bas Meere, Eline Wisse, Laurens Vousten, Sander Doodeman, Elena Torta +2 more
similarity 0.55
Abstract · Submitted to ICRA 2027

Effective wind gust rejection and stable hovering are critical for the outdoor operation of autonomous drones. However, existing gust rejection methods are primarily reactive, inferring the disturbance from the resulting motion or measuring it at the airframe. Either way, the wind has already begun to act before it can be compensated. In this work, we anticipate the gust instead by measuring the wind ahead of the drone with a low-cost, low-weight pitot-static sensor mounted on a boom. The resulting wind preview is incorporated into a nonlinear model predictive controller (MPC), which optimizes the drone motion while anticipating wind disturbances. A longer boom offers more preview time but adds inertia and degrades flight performance. We characterize this trade-off in simulation and show that the optimal preview distance is not a fixed property of the platform, but shifts with the wind speed and with how quickly the drone can respond. Indoor hardware experiments confirm the trend and show that the proposed controller substantially improves hover performance against a PX4 baseline and an otherwise identical wind-unaware MPC. Outdoor experiments show that the error along the wind direction is reduced by 54 percent with respect to the baseline, demonstrating that a single wind-aligned sensor can significantly improve hovering performance.

0.21

DR-IPC: Disturbance-Resilient Integrated Planning and Control for LiDAR-Based Quadrotor Navigation

cs.RO eess.SY ·2026-10-02 ·Peng Liu, Jingyan Wang, Qipeng Ye, Wen Li, Jinya Su +3 more
similarity 0.55
Abstract · 11 pages, 16 figures, 7 tables

LiDAR-based quadrotor navigation in cluttered environments remains challenging under external disturbances, particularly when obstacle-aware motion generation and disturbance-rejection control are handled in separate layers. This article presents disturbance-resilient integrated planning and control (DR-IPC), which combines lightweight path guidance with nonlinear model predictive control (NMPC) to directly generate angular velocity and thrust. An interconnected extended Kalman filter and nonlinear disturbance observer jointly provide filtered state estimates and reconstructed disturbances for NMPC prediction. The resulting formulation unifies nonlinear quadrotor dynamics, actuator constraints, local motion generation, and penalised safe-flight-corridor residuals without requiring a separate trajectory-optimization stage. Gazebo and MARSIM simulations, together with indoor and outdoor experiments, validate DR-IPC under wind, suspended payloads, narrow passages, ball impacts and reactive avoidance of a dynamic obstacle. In multi-goal navigation with disturbances, DR-IPC increases the number of completed missions from 1/10 to 9/10 in Gazebo and reduces the altitude RMSE from 0.34 to 0.01 m in experiments. The complete system operates onboard at 100 Hz. Supplementary videos are available on the project page https://drpp316.github.io/DR-IPC-Page/, and the source code will be released.

0.25

Variable-Step Time-Delay Control for Proactive Aperiodic Spacecraft Attitude Control

eess.SY ·2026-08-11 ·Yonsoo Kim, Hancheol Cho
published similarity 0.54
Abstract · 17 pages, 12 figures, 4 tables. Revised version (v3) with substantial updates to the theoretical analysis, practical implementation, and num…

This paper addresses proactive aperiodic spacecraft attitude control under model uncertainty, environmental disturbances, and actuator degradation. To this end, we develop Variable step Time Delay Control (VTDC), which jointly designs robust feedback control and control-update scheduling rather than treating them as separate components. Inspired by adaptive stepsize regulation in Runge Kutta integration, VTDC structures the local control error to scale with the realized timestep. Using sliding manifold based Time Delay Control, the resulting System Time Delay Error (TDE), which reflects local model and uncertainty variations, is shown to be quadratically bounded by the control interval. This relation yields a closed form feedback law that enlarges or reduces the subsequent interval to regulate the TDE magnitude. The next update time is therefore determined algebraically without continuous trigger monitoring, future state prediction, or iterative search. The resulting variable step closed loop admits bounded timesteps and step ratios, excludes Zeno behavior, and renders the sliding variable uniformly ultimately bounded. Nonlinear spacecraft attitude control simulations demonstrate accurate tracking with low scheduling cost under representative uncertainties and disturbances.

0.23

Cybflight: An Embedded Rust Autopilot for Aerial Robotics Research

cs.RO ·2026-09-25 ·Yifan Lin, Chao Qin, H S Helson Go, Hugh H. -T. Liu
code/data similarity 0.54
Abstract

Bringing an aerial robotics method from simulation to flight should not require rebuilding a mature autopilot or adding a companion computer. Cybflight is an open-source embedded Rust research autopilot whose typed, replaceable interfaces connect hardware access, perception, state estimation, trajectory planning, and control. This modular development and compile-time optimization workflow is demonstrated with replaceable Rust implementations of model predictive contour-tracking control (MPCTC) and incremental nonlinear dynamic inversion (INDI) running on one STM32H743 without a companion computer. Using this configuration, the vehicle reaches 12.38 m/s during indoor flight, while an outdoor flight using global navigation satellite system (GNSS) position updates reaches 31.4 m/s. These flights show that running demanding estimation and nonlinear control entirely on a flight-controller microcontroller need not come at the expense of a modular autopilot structure.

0.64

Appointed-Time Fault-Tolerant Fast Terminal Sliding Control for UAVs with a Tracking Error-Based Disturbance Observer

cs.AI ·2026-10-31 ·Jinfa Li, Sheng Xu, Yanjie Wu, Chengyue Su
similarity 0.54
Abstract

This paper addresses the critical challenge of high-performance fault-tolerant tracking control for quadrotor UAVs under complex conditions including external disturbances, parameter uncertainties, and actuator faults. A synergistic control framework is proposed by decoupling the system into position and attitude loops, each governed by the following three innovations. First, an Appointed-Time Prescribed Performance Function (AT-PPF) is developed to strictly constrain the tracking error within a predefined funnel boundary, ensuring convergence within a fixed time regardless of initial conditions. Second, a Tracking Error-Based Fixed-Time Composite Disturbance Observer (TFxTCDO) is developed to enable fast and accurate estimation of lumped disturbances without requiring full-state information or precise system modeling. This observer directly couples disturbance estimation with the control objective, thereby enhancing robustness and convergence. Third, a Fast Second-Order Terminal Sliding Mode Controller (NFSO-TSMC) is designed to achieve faster convergence and effective chattering mitigation. Simulation results demonstrate that the proposed control strategy significantly outperforms conventional methods in terms of tracking accuracy, fault recovery speed, and robustness against uncertainties.

0.21