CS Paper Radar

Natural Swing-Up of an Underpowered Double Pendulum

Arne Sachtler, Manuel Keppler, Florian Loeffl, Alin Albu-Schäffer

cs.RO eess.SY ·submitted 2026-11-12 22:55 UTC · v1

Abstract

Robots with weak motors must ride their natural dynamics rather than fight them. We swing up a direct-drive planar two-link robot, whose motors deliver only about 6\,\% of its shoulder gravity torque, along its nonlinear normal modes, two-dimensional invariant manifolds consisting of periodic orbits. On a non-strict mode, injecting energy necessarily moves the state off the manifold, so pumping and stabilization compete for the same bounded torque. We split the input torque into a power-neutral steering component and a scalar pumping input, the only component that changes the energy. The allocation then becomes a linear program in two variables: maximize pumping subject to the torque limits and one control-Lyapunov constraint. The constraint uses the model-based rate of the error, so no stabilizing feedback gain is needed. Experiments in hardware show swing-ups along both modes and compare the allocation with summing-and-clipping and with prioritized stabilization.

Closest papers

Nearest neighbours by meaning across the whole index.

Strict Modes Everywhere - Bringing Order Into Dynamics of Mechanical Systems by a Potential Compatible With the Geodesic Flow

cs.RO ·2026-09-04 ·Arne Sachtler, Alin Albu-Schäffer
top venuehighly cited similarity 0.57
Abstract

Strict nonlinear normal modes provide very regular families of oscillations within conservative mechanical systems. However, a strict normal mode will generally be an isolated curve within the configuration space of the system. In this letter, we design a potential that will densely fill the configuration space with strict normal modes such that each configuration belongs to one mode and each mode passes through a common point, the equilibrium. As the potential can be realized by (nonlinear) elastic elements it can be used to execute a variety of periodic trajectories very efficiently. Most of the required torques will come from the elastic elements in the system and not from the actuators. We also design a controller stabilizing the system to a desired target mode and a controller performing swing-up and compensating dissipated energy. Finally, we showcase the approach for a two DoF manipulator. The experiments show that the approach performed well for the example system.

0.71

Total Energy Shaping of Underactuated Systems via Gravity Compensation at the Desired Equilibrium

eess.SY ·2026-11-12 ·M. Reza J. Harandi, Mehrzad Namvar
similarity 0.57
Abstract

This paper investigates total energy shaping of underactuated mechanical systems with gravity compensation evaluated at the desired equilibrium instead of throughout the online closed-loop operation. Within the interconnection and damping assignment passivity-based control (IDA-PBC) framework, sufficient conditions for local asymptotic stability are established in terms of integrability of a vector field and positive definiteness of an augmented potential energy. The approach is also combined with a reformulation of potential energy matching that replaces a nonhomogeneous partial differential equation with a homogeneous one and introduces an additional design term. Analytic constructions for the TORA system and a class of two-degree-of-freedom systems illustrate how the matching and integrability requirements can be addressed. The proposed control law avoids online evaluation of the configuration-dependent gravity term; offline controller synthesis and verification can still require knowledge of the gravity model.

0.31

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.57
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

cs.RO eess.SYmath.OC ·2026-11-01 ·Hamza Tariq, Adeel Akhtar
code/data similarity 0.56
Abstract · 8 pages, 3 Figures

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

0.22

Port-Hamiltonian Koopman Operator Synthesis for Mechanical Systems

cs.RO eess.SY ·2026-09-15 ·Rajpal Singh, Aditya Singh, Jishnu Keshavan
similarity 0.56
Abstract

Finite-dimensional Koopman models enable efficient linear prediction and control of nonlinear robotic systems. However, models learned purely from trajectory data may violate the energetic structure of the underlying mechanics, producing predictions that exhibit artificial energy growth and diverge under recursive propagation. This work presents a structure-preserving Koopman framework for Euler-Lagrange systems built on generalized-momentum coordinates. The momentum transformation exposes the mechanical actuation as a known, state-independent port, which is preserved explicitly in the lifted dynamics. A structure-constrained neural architecture is developed to jointly learn the lifting functions and a port-Hamiltonian Koopman generator, rendering the learned dynamics passive by construction rather than through penalty terms or post-hoc projection. A Cayley-midpoint discretization further preserves the corresponding storage-dissipation balance exactly in discrete time. These properties are established analytically by deriving the discrete storage balance and associated stability guarantees of the learned predictor. Simulation and experimental studies demonstrate improved prediction accuracy, data efficiency, and closed-loop tracking over Koopman baselines, with increasing gains for higher-dimensional systems.

0.23

Real-Time Nonlinear MPC via Sequential Quadratic Programming with Structure-Exploiting ADMM and Interior-Point Methods for Underactuated Double-Pendulum Swing-Up

eess.SY cs.RO ·2026-08-10 ·Nick Karydakis, Konstantinos Chatzilygeroudis
similarity 0.55
Abstract · 6 pages, 4 figures, 1 table, finalist in the 4th AI Olympics with RealAIGym (https://ai-olympics.dfki-bremen.de)

The 4th "AI Olympics with RealAIGym" competition, to be held at IJCAI-ECAI 2026 in Bremen, challenges participants to develop a global control policy for swinging up and stabilizing an underactuated two-link system in its upright position. In contrast to previous editions, participants develop and evaluate their control strategies directly on remotely accessible CloudPendulum hardware, with limited interaction time and without prior knowledge of the system's model parameters. This paper presents an optimal-control-based approach employing real-time nonlinear model predictive control implemented using sequential quadratic programming. The results demonstrate that the proposed SQP-based MPC controller achieves reliable swing-up and stabilization performance, while maintaining robustness against disturbances.

0.20

Breaking speed scaling in quadrupedal robots via Huygens' coupled-pendulum dynamics

cs.RO ·2026-09-09 ·Yucheng Tao, Yongbin Jin, Shaowen Cheng, Xianwei Liu, Yanyan Yuan +6 more
similarity 0.55
Abstract

Achieving biological-level running speeds has largely been pursued through advances in control algorithms, which improve the utilization of existing hardware. However, the ultimate speed limits remain governed by the underlying force and torque requirements of rapid locomotion, which are typically addressed through increased actuator capacity. Inspired by Huygens' coupled pendulums, we demonstrate that superior locomotion can emerge from principled exploitation of intrinsic dynamics rather than brute-force hardware scaling. Inter-limb inertial coupling redistributes energy across the gait cycle and reduces peak joint torque required for rapid periodic motion, thereby expanding the achievable speed without proportional increases in actuator capability. Incorporating hardware parameters as additional design variables further extends this analysis into a co-optimization framework, enabling the systematic utilization of inertial coupling in robot design. Guided by this framework, a quadruped robot achieves a running speed of 10.74 m/s (Froude number 21.4) and completes a 100-meter sprint in 12.2 seconds, representing the first legged robot to surpass 10 m/s. These results establish inertial coupling as an underlying mechanism governing high-speed legged locomotion and highlight its role in reducing force requirements, offering new insights into the design of agile robotic systems.

0.24

Inverse Optimal Feedback Stabilization of 3D Nonholonomic Vehicles in Spherical Coordinates

eess.SY math.OC ·2026-09-28 ·Kwang Hak Kim, Mamadou Diagne, Miroslav Krstic
similarity 0.54
Abstract · Submitted to the 2027 American Control Conference (ACC)

Inverse optimal control provides optimality and robustness guarantees without solving the Hamilton--Jacobi--Bellman (HJB) equation, but its application to 3D nonholonomic vehicles has been precluded by the absence of strict control Lyapunov functions (CLFs). Recently, such strict CLFs were constructed for the 3D nonholonomic vehicle in spherical coordinates, which circumvent Brockett's obstruction, on the largest possible domain. Building on this construction, this paper develops a general inverse optimal stabilizing controller for the 3D nonholonomic vehicle actuated by surge velocity, pitch rate, and yaw rate. The design is a damping $L_gV$ feedback that minimizes a meaningful cost and inherits stability margins. Its flexibility is demonstrated through two choices of penalty function: a quadratic running cost on the state, recovering a near-classical optimal control formulation, and stabilization under user-defined input constraints. Numerical simulations illustrate stabilization performance, control-effort tradeoffs, and the effect of input constraints.

0.16