CS Paper Radar

Total Energy Shaping of Underactuated Systems via Gravity Compensation at the Desired Equilibrium

M. Reza J. Harandi, Mehrzad Namvar

eess.SY ·submitted 2026-11-12 16:56 UTC · v1

Abstract

This paper investigates total energy shaping of underactuated mechanical systems with gravity compensation evaluated at the desired equilibrium instead of throughout the online closed-loop operation. Within the interconnection and damping assignment passivity-based control (IDA-PBC) framework, sufficient conditions for local asymptotic stability are established in terms of integrability of a vector field and positive definiteness of an augmented potential energy. The approach is also combined with a reformulation of potential energy matching that replaces a nonhomogeneous partial differential equation with a homogeneous one and introduces an additional design term. Analytic constructions for the TORA system and a class of two-degree-of-freedom systems illustrate how the matching and integrability requirements can be addressed. The proposed control law avoids online evaluation of the configuration-dependent gravity term; offline controller synthesis and verification can still require knowledge of the gravity model.

Closest papers

Nearest neighbours by meaning across the whole index.

Natural Swing-Up of an Underpowered Double Pendulum

cs.RO eess.SY ·2026-11-12 ·Arne Sachtler, Manuel Keppler, Florian Loeffl, Alin Albu-Schäffer
similarity 0.57
Abstract

Robots with weak motors must ride their natural dynamics rather than fight them. We swing up a direct-drive planar two-link robot, whose motors deliver only about 6\,\% of its shoulder gravity torque, along its nonlinear normal modes, two-dimensional invariant manifolds consisting of periodic orbits. On a non-strict mode, injecting energy necessarily moves the state off the manifold, so pumping and stabilization compete for the same bounded torque. We split the input torque into a power-neutral steering component and a scalar pumping input, the only component that changes the energy. The allocation then becomes a linear program in two variables: maximize pumping subject to the torque limits and one control-Lyapunov constraint. The constraint uses the model-based rate of the error, so no stabilizing feedback gain is needed. Experiments in hardware show swing-ups along both modes and compare the allocation with summing-and-clipping and with prioritized stabilization.

0.30

Modeling and Generative-AI-Based Design of Load-Adaptive Gravity Balancing Mechanisms

cs.RO ·2026-09-25 ·Ryotaro Kayawake, Kazuki Abe, Shota Miyake, Masahiro Watanabe, Kenjiro Tadakuma
similarity 0.56
Abstract · 13 pages, 9 figures. To be submitted to the Journal of Mechanical Design

Load-adaptive gravity balancing mechanisms (LA-GBMs) can accommodate various loading conditions by passively changing their characteristics in response to payload variations. However, their design is difficult because both the desired mechanism motion and static equilibrium under variable payloads must be satisfied simultaneously. This study proposes a general design methodology for LA-GBMs that does not depend on specific mechanism architectures or mechanical elements. The necessary conditions for the potential fields of LA-GBMs are formulated, and two general forms are derived: an affine form representing the effect of payload mass and a factorized form representing state transitions associated with load adaptation and gravity balancing. These forms are then provided to generative AI as design requirements to generate candidate potential functions. The generated functions are analytically verified in terms of their conformity to the two general forms and the conditions required for valid LA-GBMs. Furthermore, the obtained potential functions are decomposed into individual terms, and an example of a method for constructing an LA-GBM by combining springs, counterweights, and function-generating linkage mechanisms is presented. By using potential functions as an intermediate representation, the proposed framework enables the generation of LA-GBM design candidates without prescribing a mechanism architecture in advance. Mechanical realizability and manufacturability of the generated potential fields remain important issues for future work.

0.28

Derivative-Free Generalized Multivariable Super-Twisting Control for Constrained Euler-Lagrange Systems

eess.SY ·2026-09-28 ·Chidre Shravista Kashyap, Jishnu Keshavan
similarity 0.54
Abstract

Robotic manipulators performing payload lift-and-transfer must track prescribed trajectories under abrupt load changes, with limited actuation and inaccurate plant knowledge. Such plants are inherently described by multivariable Euler--Lagrange~(EL) dynamics with cross-coupling established through inertial and Coriolis terms. The super-twisting algorithm~(STA) is the standard approach to regulating a first-order sliding mode~(FOSM) in such settings, yet existing designs are largely restricted to scalar sliding variables, and rest on a disturbance-derivative assumption that EL systems violate. In particular, the FOSM dynamics depend on the disturbance and become discontinuous under the step changes in load produced by payload engagement and release, rendering that derivative ill-defined. This study resolves both with a derivative-free generalized multivariable super-twisting framework. The discontinuous sign-function integral term is replaced with a continuous fractional-power term whose dynamics are independent of the disturbance derivative, while the known state-dependent scaling of the perturbation is incorporated into both the control law and the adaptive gain update. A time-shifting barrier function guarantees prescribed-time convergence to a user-specified bound independently of initial conditions, with the design relying only on mass-matrix norm bounds. Simulation and experimental results on a 7-DoF manipulator under actuator saturation are used to validate the proposed scheme.

0.25

Robust Semi-passive Velocity Field Control with Boundedness Guarantees for Safe Interaction between Mechanical Systems and Physical Environment

eess.SY cs.RO ·2026-08-31 ·Van Trong Dang, Sumitaka Honji, Takahiro Wada
similarity 0.54
Abstract

Controllers that guarantee energetic passivity with respect to the pair of external force and velocity realize safe interaction between the mechanical system and its physical environment. However, solely adhering to energetic passivity constraints may impose fundamental limitations on control performance and, in some cases, prevent the successful execution of controlled tasks. In addition, external disturbances from the physical environment can drive the system energy level and states beyond operational regions, thereby undermining task performance and safety. In this paper, we study a robust time-varying semi-passive velocity field control to aim to relax the inherently conservative nature of fully passive control methods in a controlled manner. Specifically, the proposed control method guarantees passivity of the closed-loop system with respect to the force-velocity input-output pair when the energy level exceeds a predefined level, while permitting non-passive behaviors to preserve task performance otherwise. Furthermore, the energy level and the states of the closed-loop system are proved to converge to bounded domains even in the presence of unpredicted disturbances. Additionally, the proposed method also enables constraining power flow between the closed-loop system and its physical environment to enhance safety in the interaction process. Numerical simulation examples demonstrate the effectiveness of the proposed method.

0.21

Profile-Anchored Control: Velocity Shaping with Exact Disturbance Rejection and Transient-Free Replanning

eess.SY math.OC ·2026-11-19 ·Christian Fredrik Sætre, Morten Dinhoff Pedersen
theory similarity 0.54
Abstract

In many motion-control problems, how a target is approached matters as much as whether it is reached: speed and deceleration must stay within actuator, safety or comfort limits despite unknown loads and disturbances. Position-dependent velocity profiles provide a natural way to describe such requirements. We show that the square of such a profile can be used both to plan the motion and to construct the controller that executes it. Our main result, profile-anchored control with exact rejection (PACER), recovers the nominal motion after a finite time under an unknown gain and load, and then allows the profile to be replaced mid-motion without a transient. It combines a static law for scalar second-order systems with a dynamic law for first-order ones, used for disturbance rejection. The static law guarantees uniform global asymptotic stability under an unknown input gain with a known lower bound, and finite-time stability under local homogeneity, while the first-order law gives analogous guarantees under disturbances of bounded rate and provides the exact rejection in PACER. Replanning of a profile under speed, acceleration and jerk limits can be formulated as a convex program. The approach is illustrated on a simulated elevator.

0.25

Real-Time Nonlinear MPC via Sequential Quadratic Programming with Structure-Exploiting ADMM and Interior-Point Methods for Underactuated Double-Pendulum Swing-Up

eess.SY cs.RO ·2026-08-10 ·Nick Karydakis, Konstantinos Chatzilygeroudis
similarity 0.53
Abstract · 6 pages, 4 figures, 1 table, finalist in the 4th AI Olympics with RealAIGym (https://ai-olympics.dfki-bremen.de)

The 4th "AI Olympics with RealAIGym" competition, to be held at IJCAI-ECAI 2026 in Bremen, challenges participants to develop a global control policy for swinging up and stabilizing an underactuated two-link system in its upright position. In contrast to previous editions, participants develop and evaluate their control strategies directly on remotely accessible CloudPendulum hardware, with limited interaction time and without prior knowledge of the system's model parameters. This paper presents an optimal-control-based approach employing real-time nonlinear model predictive control implemented using sequential quadratic programming. The results demonstrate that the proposed SQP-based MPC controller achieves reliable swing-up and stabilization performance, while maintaining robustness against disturbances.

0.20

Admissibility-Preserving Control for Strict-Feedback Nonlinear Systems with Asymmetric Actuator Constraints

eess.SY cs.ROmath.DS ·2026-08-15 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.53
Abstract

This paper develops Admissibility-Preserving Control (APC), a realization-centered safety-critical control framework for strict-feedback systems subject to asymmetric actuator limits, time-varying output constraints, and actuator-rate limitations. APC denotes the overall control architecture, whereas an Admissibility-Preserving Input Realization (APIR) denotes its constraint-realization module. Therein, the APIR dynamically generates the physical plant input while rendering its prescribed asymmetric actuator set forward invariant. In contrast to algebraic clipping and post-design saturation compensation, the actuator limits are embedded directly in a continuously differentiable dynamic realization with user-selectable regularity and interpretable tuning parameters. The APIR is integrated with recursive backstepping by treating the realized plant input as an additional state. The resulting design does not require an input-to-state stability assumption on the uncontrolled plant. Instead, the nonlinear drift terms are compensated recursively, subject to an explicit compatibility condition between the desired motion, the available control authority, and the APIR interior gain. The framework is further extended to time-varying output-safe tracking through a smooth asymmetric logarithmic barrier coordinate and its associated Lyapunov function and to simultaneous actuator-magnitude and rate constraints through a cascaded APIR. Rigorous Lyapunov and invariance analyses establish regional asymptotic tracking, forward invariance of the compatible admissible sets, and boundedness of all closed-loop signals. Numerical studies illustrate asymmetric actuator utilization, output-safety preservation, and magnitude-rate constraint enforcement.

0.41

Passivity-Based Nonlinear Control

eess.SY ·2026-08-15 ·Pablo Borja
published similarity 0.52
Abstract · 23 Pages, 2 figures

The passivity-based control (PBC) framework focuses on understanding and modifying the energy storage and dissipation in the system to be controlled. To this end, PBC techniques often proceed in two steps: (i) ensuring that the closed-loop system's energy is minimum at the desired point, and then (ii) forcing the system to dissipate energy until reaching that point. These control methods have proven effective in controlling a wide range of systems, especially physical ones, even when they exhibit highly nonlinear behaviors. This chapter discusses the main aspects of some PBC strategies for nonlinear systems.

0.28