CS Paper Radar

Passivity-Based Nonlinear Control

Pablo Borja

eess.SY ·submitted 2026-08-15 13:09 UTC · v1
published

Abstract

The passivity-based control (PBC) framework focuses on understanding and modifying the energy storage and dissipation in the system to be controlled. To this end, PBC techniques often proceed in two steps: (i) ensuring that the closed-loop system's energy is minimum at the desired point, and then (ii) forcing the system to dissipate energy until reaching that point. These control methods have proven effective in controlling a wide range of systems, especially physical ones, even when they exhibit highly nonlinear behaviors. This chapter discusses the main aspects of some PBC strategies for nonlinear systems.

Comment
23 Pages, 2 figures
Journal ref
Chapter in Encyclopedia of Systems and Control Engineering, Volume 2, 2026
DOI
10.1016/B978-0-443-14081-5.00140-9

Closest papers

Nearest neighbours by meaning across the whole index.

Introduction to Passivity-based Control

eess.SY ·2026-08-15 ·Pablo Borja, Romeo Ortega
publishedsurvey similarity 0.93
Abstract · 26 pages, 1 figure

Passivity-based control (PBC) is a nonlinear control design framework that has proven adequate for controlling a wide range of systems, especially physical ones. Their main ingredients are physical quantities such as energy and dissipation, making the control design more intuitive and endowing the controllers with a physical interpretation. In contrast to other, mathematically-based nonlinear control approaches, the energy-based viewpoint and physical intuition of PBC often make this strategy more robust and energy efficient. This chapter provides an overview of PBC, revisiting the basic aspects of this powerful nonlinear control framework and the most common PBC approaches.

0.28

Robust Semi-passive Velocity Field Control with Boundedness Guarantees for Safe Interaction between Mechanical Systems and Physical Environment

eess.SY cs.RO ·2026-08-31 ·Van Trong Dang, Sumitaka Honji, Takahiro Wada
similarity 0.53
Abstract

Controllers that guarantee energetic passivity with respect to the pair of external force and velocity realize safe interaction between the mechanical system and its physical environment. However, solely adhering to energetic passivity constraints may impose fundamental limitations on control performance and, in some cases, prevent the successful execution of controlled tasks. In addition, external disturbances from the physical environment can drive the system energy level and states beyond operational regions, thereby undermining task performance and safety. In this paper, we study a robust time-varying semi-passive velocity field control to aim to relax the inherently conservative nature of fully passive control methods in a controlled manner. Specifically, the proposed control method guarantees passivity of the closed-loop system with respect to the force-velocity input-output pair when the energy level exceeds a predefined level, while permitting non-passive behaviors to preserve task performance otherwise. Furthermore, the energy level and the states of the closed-loop system are proved to converge to bounded domains even in the presence of unpredicted disturbances. Additionally, the proposed method also enables constraining power flow between the closed-loop system and its physical environment to enhance safety in the interaction process. Numerical simulation examples demonstrate the effectiveness of the proposed method.

0.21

Passivity Control for Synchronous Machine Systems using Battery, Field Current and Governor Actuation

eess.SY ·2026-11-17 ·Maryam Khodabakhshloo, Elizabeth L. Ratnam, Ian R. Petersen
similarity 0.53
Abstract

The passivity of synchronous machines enables power system stability to be established from local conditions. A recent state-feedback design enforces robust passivity using battery actuation at the machine terminal bus. This paper extends that design to a model that includes the field winding and the dynamics of a steam turbine and its governor. The extended model provides two additional actuator signals: the exciter input and the governor input. The nonlinear terms in the model depend on speed and field current deviations, and are represented as bounded uncertainties. Robust positive real conditions are derived in terms of a single algebraic Riccati equation. From its solution, a state-feedback controller is designed in closed form. Numerical results show that, unlike the design with battery actuation alone, the proposed controller leads to passivity at all loading levels when the damping is low.

0.09

Towards Passivity-informed Data-driven Predictive Control

eess.SY ·2026-11-09 ·Guanru Pan, Oleksii Molodchyk, Mohammad Itani, Timm Faulwasser
similarity 0.53
Abstract

We propose a passivity-informed data-driven predictive control framework based on passivity-preserving sampling of unknown continuous-time linear systems. We incorporate the passive supply rate into the objective functional alongside an output-regulation cost, thereby explicitly accounting for energy extraction. Despite being practically motivated, the resulting objective is not always convex; its convexity depends on the collected input-output training data. We exploit passivity-induced positive semidefiniteness to derive an equivalent reformulation that remains a convex quadratic program independently of the data. Furthermore, we establish recursive feasibility and asymptotic output convergence using passivity and a terminal equality constraint. Numerical simulations illustrate the closed-loop performance and computational benefits of the proposed approach.

0.24

Total Energy Shaping of Underactuated Systems via Gravity Compensation at the Desired Equilibrium

eess.SY ·2026-11-12 ·M. Reza J. Harandi, Mehrzad Namvar
similarity 0.52
Abstract

This paper investigates total energy shaping of underactuated mechanical systems with gravity compensation evaluated at the desired equilibrium instead of throughout the online closed-loop operation. Within the interconnection and damping assignment passivity-based control (IDA-PBC) framework, sufficient conditions for local asymptotic stability are established in terms of integrability of a vector field and positive definiteness of an augmented potential energy. The approach is also combined with a reformulation of potential energy matching that replaces a nonhomogeneous partial differential equation with a homogeneous one and introduces an additional design term. Analytic constructions for the TORA system and a class of two-degree-of-freedom systems illustrate how the matching and integrability requirements can be addressed. The proposed control law avoids online evaluation of the configuration-dependent gravity term; offline controller synthesis and verification can still require knowledge of the gravity model.

0.31

State-Feedback Passivity Control for Synchronous Machine Systems

eess.SY ·2026-11-05 ·Maryam Khodabakhshloo, Elizabeth L. Ratnam, Ian R. Petersen
similarity 0.51
Abstract

The passivity of a generating station enables network stability to be established from conditions verified locally at each station. For synchronous machines, however, passivity can only be certified under conditions on the operating point, and these conditions fail under heavy loading and weak damping. This paper develops a state-feedback controller that enforces passivity using a storage battery connected at the terminal bus. A bilinear term arising from the product of the rotor-speed and stator-current deviations is treated as a bounded uncertainty, leading to robust positive-real conditions that can be enforced by a state feedback control designed using a single algebraic Riccati equation. The resulting controller guarantees passivity whenever the Riccati equation admits a positive-definite solution, with no separate condition on the operating point. Numerical examples show that existing conditions certify passivity only up to a fraction of the rated current, whereas the proposed state-feedback approach certifies it at the rated operating point of the machine.

0.28

Decentralized and Equilibrium-Set-Oriented Stability Analysis and Control for Power Systems

eess.SY ·2026-08-31 ·Peng Yang, Liaoyuan Yang, Feng Liu
similarity 0.49
Abstract · 12 pages, 7 figures, 4 tables

Conventional power-system stability analysis is largely centralized and centered on a single equilibrium point, which becomes increasingly restrictive in the presence of large-scale fluctuating renewable generation. This paper develops a decentralized framework for stability analysis and control that certifies the asymptotic stability of an equilibrium set rather than that of a given single operating point. To this end, we introduce a new notion termed input--output differential passivity (IODP), which decomposes equilibrium-set stability of the interconnected system into local requirements imposed on individual devices. These requirements are formulated without embedding a particular operating equilibrium into the local conditions; once the certified regions are constructed, stability verification for a given operating scenario reduces to checking whether its equilibrium lies in the certified set. The proposed conditions require each bus to possess a sufficient level of IODP, quantified by an IODP index. To compensate for an IODP shortage, we further develop an I/O-transformation-based passivation controller that reshapes the local input--output behavior of the corresponding device. In this way, all grid-connected components can be made to satisfy the decentralized conditions for system-wide stability. The proposed framework is validated on a modified IEEE 39-bus system. Simulation results demonstrate that it provides a scalable and equilibrium-set-oriented solution for stability certification and control under highly variable operating conditions.

0.23

Real-Time Nonlinear MPC via Sequential Quadratic Programming with Structure-Exploiting ADMM and Interior-Point Methods for Underactuated Double-Pendulum Swing-Up

eess.SY cs.RO ·2026-08-10 ·Nick Karydakis, Konstantinos Chatzilygeroudis
similarity 0.46
Abstract · 6 pages, 4 figures, 1 table, finalist in the 4th AI Olympics with RealAIGym (https://ai-olympics.dfki-bremen.de)

The 4th "AI Olympics with RealAIGym" competition, to be held at IJCAI-ECAI 2026 in Bremen, challenges participants to develop a global control policy for swinging up and stabilizing an underactuated two-link system in its upright position. In contrast to previous editions, participants develop and evaluate their control strategies directly on remotely accessible CloudPendulum hardware, with limited interaction time and without prior knowledge of the system's model parameters. This paper presents an optimal-control-based approach employing real-time nonlinear model predictive control implemented using sequential quadratic programming. The results demonstrate that the proposed SQP-based MPC controller achieves reliable swing-up and stabilization performance, while maintaining robustness against disturbances.

0.20