CS Paper Radar

State-Feedback Passivity Control for Synchronous Machine Systems

Maryam Khodabakhshloo, Elizabeth L. Ratnam, Ian R. Petersen

eess.SY ·submitted 2026-11-05 00:52 UTC · v1

Abstract

The passivity of a generating station enables network stability to be established from conditions verified locally at each station. For synchronous machines, however, passivity can only be certified under conditions on the operating point, and these conditions fail under heavy loading and weak damping. This paper develops a state-feedback controller that enforces passivity using a storage battery connected at the terminal bus. A bilinear term arising from the product of the rotor-speed and stator-current deviations is treated as a bounded uncertainty, leading to robust positive-real conditions that can be enforced by a state feedback control designed using a single algebraic Riccati equation. The resulting controller guarantees passivity whenever the Riccati equation admits a positive-definite solution, with no separate condition on the operating point. Numerical examples show that existing conditions certify passivity only up to a fraction of the rated current, whereas the proposed state-feedback approach certifies it at the rated operating point of the machine.

Closest papers

Nearest neighbours by meaning across the whole index.

Passivity Control for Synchronous Machine Systems using Battery, Field Current and Governor Actuation

eess.SY ·2026-11-17 ·Maryam Khodabakhshloo, Elizabeth L. Ratnam, Ian R. Petersen
similarity 0.80
Abstract

The passivity of synchronous machines enables power system stability to be established from local conditions. A recent state-feedback design enforces robust passivity using battery actuation at the machine terminal bus. This paper extends that design to a model that includes the field winding and the dynamics of a steam turbine and its governor. The extended model provides two additional actuator signals: the exciter input and the governor input. The nonlinear terms in the model depend on speed and field current deviations, and are represented as bounded uncertainties. Robust positive real conditions are derived in terms of a single algebraic Riccati equation. From its solution, a state-feedback controller is designed in closed form. Numerical results show that, unlike the design with battery actuation alone, the proposed controller leads to passivity at all loading levels when the damping is low.

0.09

Decentralized and Equilibrium-Set-Oriented Stability Analysis and Control for Power Systems

eess.SY ·2026-08-31 ·Peng Yang, Liaoyuan Yang, Feng Liu
similarity 0.55
Abstract · 12 pages, 7 figures, 4 tables

Conventional power-system stability analysis is largely centralized and centered on a single equilibrium point, which becomes increasingly restrictive in the presence of large-scale fluctuating renewable generation. This paper develops a decentralized framework for stability analysis and control that certifies the asymptotic stability of an equilibrium set rather than that of a given single operating point. To this end, we introduce a new notion termed input--output differential passivity (IODP), which decomposes equilibrium-set stability of the interconnected system into local requirements imposed on individual devices. These requirements are formulated without embedding a particular operating equilibrium into the local conditions; once the certified regions are constructed, stability verification for a given operating scenario reduces to checking whether its equilibrium lies in the certified set. The proposed conditions require each bus to possess a sufficient level of IODP, quantified by an IODP index. To compensate for an IODP shortage, we further develop an I/O-transformation-based passivation controller that reshapes the local input--output behavior of the corresponding device. In this way, all grid-connected components can be made to satisfy the decentralized conditions for system-wide stability. The proposed framework is validated on a modified IEEE 39-bus system. Simulation results demonstrate that it provides a scalable and equilibrium-set-oriented solution for stability certification and control under highly variable operating conditions.

0.23

Guidelines for the implementation of power oscillation damping controllers in power converters

eess.SY ·2026-09-02 ·Javier Renedo, Macarena Martín Almenta, Sergio Martínez Villanueva, Agustín Díaz-García, Antonio Cordón +1 more
similarity 0.54
Abstract

One of the most effective ways to damp electromechanical oscillations in power systems is by means of supplementary controllers attached to the different devices in the power system is by means of power system stabilizers (PSS) in synchronous machines or by means of power oscillation damping (POD) controllers in facilities with power converters. In the recent years, the use of POD controllers in voltage source converters (VSCs) with grid-following (GFL) control has been investigated. Although the potential of POD controllers to help to damp inter-area oscillations in power systems is enormous, their correct implementation is not trivial, because their effectiveness is strongly linked to their settings. This paper provides guidelines for the implementation of POD controllers in power converters for application in real-world power systems. The paper proposes compliance criteria for POD controllers using a synthetic test system and a systematic methodology used in Spanish technical standard for monitoring compliance (NTS), considering practical considerations. The paper also includes numerical examples to illustrate compliance criteria for POD controllers in a synthetic test system. A generic power converter with grid-following (GFL) control is used for the analysis by simulation and POD controllers using modulation of active-power injection (POD-P), reactive-power injection (POD-Q) or both simultaneously (POD-PQ) will be analysed. Results were validated in a large-scale power system. The paper concludes that by using appropriate synthetic systems, methodologies and compliance criteria, POD controllers in power converters could be effective to damp electromechanical oscillation in large-scale power systems.

0.33

New Results for Networked Control of Nonlinear Plants Subject to Transmission Delays

eess.SY ·2026-10-17 ·Ruchao Su, Xianwei Li, Shaoyuan Li
published similarity 0.52
Abstract · Accepted by IEEE CDC 2026. Copyright may be transferred without notice, after which this version might no longer be accessible

This paper studies networked control for nonlinear plants subject to several network-induced constraints, with a particular focus on transmission delays. In the context of general nonlinear networked control systems, a standard approach for guaranteeing stability is to construct a storage function, coupled with a single timer variable, to analyze the maximum allowable transmission interval (MATI) and maximum allowable transmission delay (MAD). In this paper, we propose a new approach that assigns each signal that is either \textit{in transit or most recently updated}, to an individual timer variable. This enables the individual characterization and compensation for the dynamics of each potential updating error. Subsequently, based on a novel construction of timer-coupled storage functions, the dynamics of these timer variables is designed and investigated, leading to less conservative conditions on the MATI and MAD than those by the standard approach while still ensuring closed-loop input-to-state stability with respect to external disturbances. Finally, simulation results are given to illustrate the advantages of these new results.

0.31

Generalized H matrix stability for power systems

eess.SY ·2026-11-06 ·Elinor Ginzburg-Ganz, Yoash Levron, Juri Belikov, George Weiss
published similarity 0.52
Abstract

The small-signal stability of a power system model with arbitrary loads is investigated, with a focus on locally constant power loads in lossless networks. A central element of the proposed analysis is the matrix H, which represents the partial derivatives of generator powers with respect to their relative angles. The local stability of any equilibrium point is determined by the properties of H if the loads consume locally constant power. Specifically, an equilibrium point is asymptotically stable if H is positive definite and unstable if H is full-rank and not positive definite, while several quantitative relationships between the eigenvalues of H and the system Jacobian matrix are also established. The main contribution is that loads are allowed to be arbitrarily located within the transmission network, thereby generalizing the existing H matrix stability criterion which is valid only if loads are located at the same buses as the generators. The advantage of the proposed criterion is demonstrated through case studies involving systems with up to 2869 buses. Accurate stability assessments are maintained, where alternative methods, such as the NRPS model, are found to be overly conservative. Additionally, a computational acceleration by a factor of 340 relative to Jacobian-based methods is achieved.

0.42

Relative-Degree Wall Restricts Passivity-Based Stability Analysis in Inverter-Dominant Grids

eess.SY ·2026-08-30 ·Xiaoyu Peng, Zhongze Li, Xi Ru, Xinghua Chen, Feng Liu
top venue similarity 0.51
Abstract

This letter reveals a fundamental limitation of passivity-based distributed stability analysis in power systems. Under the standard formulation, passivity certification inherently imposes a relative-degree compatibility constraint that excludes many high-fidelity inverter dynamic models (e.g., those that include electromagnetic transients). Potential extensions of passivity frameworks are discussed to break this limitation.

0.43

Passivity-Based Nonlinear Control

eess.SY ·2026-08-15 ·Pablo Borja
published similarity 0.51
Abstract · 23 Pages, 2 figures

The passivity-based control (PBC) framework focuses on understanding and modifying the energy storage and dissipation in the system to be controlled. To this end, PBC techniques often proceed in two steps: (i) ensuring that the closed-loop system's energy is minimum at the desired point, and then (ii) forcing the system to dissipate energy until reaching that point. These control methods have proven effective in controlling a wide range of systems, especially physical ones, even when they exhibit highly nonlinear behaviors. This chapter discusses the main aspects of some PBC strategies for nonlinear systems.

0.28

Harmonic Stability of Power Systems: A Control-Theoretic Definition and Assessment Criteria

eess.SY ·2026-08-20 ·N. Bhoir, A. Sarkar, J. E. Machado, J. Schiffer
similarity 0.50
Abstract

Harmonic interactions have become a defining dynamic stability phenomenon in converter-based power systems (CBPSs). However, a formalization of the notion of harmonic stability in the context of nonlinear dynamical systems is not available thus far. In this paper, we propose a definition of harmonic stability formulated as a combination of two standard stability notions, namely, bounded-input bounded-output (BIBO) and internal stability properties with respect to any nominal periodic trajectory. Moreover, we rigorously show that the local harmonic stability of any nominal periodic trajectory of nonlinear CBPSs is implied by the stability properties of its linear time-periodic (LTP) approximation. In addition, to enable computationally tractable stability assessment, we develop a framework based on harmonic state-space (HSS) representations of LTP models. In particular, we provide time-invariant linear matrix inequality (LMI) conditions to certify harmonic stability. The proposed methodology is illustrated on a grid-following converter system, where the HSS-based analysis numerically confirms harmonic stability around the periodic operating trajectory.

0.29