CS Paper Radar

New Results for Networked Control of Nonlinear Plants Subject to Transmission Delays

Ruchao Su, Xianwei Li, Shaoyuan Li

eess.SY ·submitted 2026-10-17 03:36 UTC · v1
published

Abstract

This paper studies networked control for nonlinear plants subject to several network-induced constraints, with a particular focus on transmission delays. In the context of general nonlinear networked control systems, a standard approach for guaranteeing stability is to construct a storage function, coupled with a single timer variable, to analyze the maximum allowable transmission interval (MATI) and maximum allowable transmission delay (MAD). In this paper, we propose a new approach that assigns each signal that is either \textit{in transit or most recently updated}, to an individual timer variable. This enables the individual characterization and compensation for the dynamics of each potential updating error. Subsequently, based on a novel construction of timer-coupled storage functions, the dynamics of these timer variables is designed and investigated, leading to less conservative conditions on the MATI and MAD than those by the standard approach while still ensuring closed-loop input-to-state stability with respect to external disturbances. Finally, simulation results are given to illustrate the advantages of these new results.

Comment
Accepted by IEEE CDC 2026. Copyright may be transferred without notice, after which this version might no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

The Race between Protection and Control: Fast Reactive Reserves Against Overvoltage Cascade

eess.SY ·2026-11-14 ·Abdallah Alalem Albustami, Mads Almassalkhi, Ahmad F. Taha
similarity 0.55
Abstract

In an overvoltage cascade, each relay trip removes reactive power absorption and raises the voltage at other plants, often faster than controls can act. This paper determines how much fast reactive power to hold, where, and how fast, so that no contingency trips a plant. A trip certificate allows a relay to pick up if it resets before its delay expires, making the sizing a linear program. A necessary condition identifies the relays that only preventive action can protect, and the reserve of one control decreases with the relay delay and increases with its latency. In nonlinear simulations of four systems, the corrective actions prevent every trip within the analysis window for relays without reset hysteresis, and each plant's own set point is the most effective reserve. A 2\% hysteresis or a small error in the relay voltage can change the reserve as much as the relay delay.

0.31

From Asymptotic to Designer-Assigned-Time Control: A Review of Stability Notions, Design Mechanisms, and Controller Architectures

eess.SY ·2026-10-08 ·Özhan Bingöl
surveybenchmark similarity 0.54
Abstract

Many control tasks require a target to be reached not only eventually but on time. Finite-, fixed-, predefined-, and prescribed-time control address this need, yet the labels are used loosely: a settling time that grows with the initial condition, a bound that holds for all initial conditions, a deadline chosen by the designer, and a limit attained only at the terminal instant often share one name. This review aims to make such claims comparable. It separates three questions that are often conflated: what temporal property is promised, which feature of the Lyapunov analysis produces it, and which controller architecture carries it into the closed loop. A recurring question is whether a guarantee proven for an idealized loop survives once observers, adaptation, disturbances, actuator limits, and digital implementation are included. The examined studies are therefore audited one by one, recording what each claims, which variable is actually certified, and how the result is validated. The audit shows that estimation and approximation errors often reduce an exact guarantee to a practical one, and that experimental evidence comes mostly from fast electromechanical systems. A scalar benchmark with two complementary tunings shows how much of the apparent difference between methods stems from conservative bounds, initial-condition dependence, and numerical tolerance, and how saturation and sampling can delay or remove a deadline. The review closes with open problems, among them deciding which deadlines a given plant can meet, combining certificates across interconnected subsystems, and preserving a guarantee through implementation.

0.18

Reduced-Order Model Characterization of Nonlinear Sustained Oscillations

eess.SY math.DS ·2026-09-27 ·Kaiyang Huang, Dan Wilson, Kai Sun
similarity 0.52
Abstract

Nonlinear sustained oscillations involving inverter-based resources can happen when device and network interactions produce an attracting limit cycle around an unstable equilibrium. A damping controller must then describe nonlinear dynamics over the region between the two invariant sets, where a local equilibrium linearization can be insufficient. In this paper, a controlled phase--isostable model is first developed on a two-dimensional invariant manifold connecting the equilibrium and the limit cycle. Dynamics on this surface are represented by phase and isostable coordinates, while physical states and control inputs are related to these coordinates through nonlinear reconstruction and response functions. The required functions are computed from connecting trajectories and periodic-orbit data. A control strategy is then designed to provide extra damping while limiting phase distortion. Case studies on a two-area system and an IEEE 39-bus system demonstrate more effective oscillation damping than the compared equilibrium-linearized designs under the same conditions.

0.27

State-Feedback Passivity Control for Synchronous Machine Systems

eess.SY ·2026-11-05 ·Maryam Khodabakhshloo, Elizabeth L. Ratnam, Ian R. Petersen
similarity 0.52
Abstract

The passivity of a generating station enables network stability to be established from conditions verified locally at each station. For synchronous machines, however, passivity can only be certified under conditions on the operating point, and these conditions fail under heavy loading and weak damping. This paper develops a state-feedback controller that enforces passivity using a storage battery connected at the terminal bus. A bilinear term arising from the product of the rotor-speed and stator-current deviations is treated as a bounded uncertainty, leading to robust positive-real conditions that can be enforced by a state feedback control designed using a single algebraic Riccati equation. The resulting controller guarantees passivity whenever the Riccati equation admits a positive-definite solution, with no separate condition on the operating point. Numerical examples show that existing conditions certify passivity only up to a fraction of the rated current, whereas the proposed state-feedback approach certifies it at the rated operating point of the machine.

0.28

Performance Analysis of Time-Delay Systems under External Perturbations Using Output-to-Output Gain

eess.SY ·2026-08-29 ·Ruslan Seifullaev, André M. H. Teixeira
similarity 0.50
Abstract

Communication delays are inherent in networked control systems and may significantly affect closed-loop performance. This paper investigates the impact of external perturbations in observer-based linear systems with delayed measurements and control signals using the output-to-output gain (OOG) framework. By employing dissipativity theory and Lyapunov--Krasovskii functionals, delay-dependent linear matrix inequality conditions are derived that provide explicit upper bounds on the OOG for systems with independent delays in measurement and actuation channels. In addition, two special classes of constant-delay systems are considered: Padé-approximated systems and finite-dimension reducible systems. Numerical examples illustrate the applicability of the proposed approaches

0.26

Robust Data-Driven Output Feedback for Systems With Unknown Input Delays

eess.SY ·2026-10-31 ·Ngoc Tuan Dinh, Ba Huy Nguyen, Alexey Peregudin, Egor Dogadin
similarity 0.50
Abstract · 6 pages, 1 figure. Submitted jointly to IEEE Control Systems Letters (L-CSS)

In a history-feedback realization, an input delay increases memory without increasing the number of unknown physical coefficients. We use this structure to design output-feedback controllers for discrete-time systems with one input, one output, and known undelayed order, using noisy input-output data. For a known delay, we derive a necessary and sufficient linear matrix inequality for common-quadratic stabilization of all models consistent with the data. Optimizing its equation-error bound gives a robustness margin for the measured record. For an unknown constant delay in a known interval, we characterize noiseless delay ambiguity and give a sufficient condition for one controller to stabilize all models for every delay consistent with the error bound. Under stated excitation and nondegeneracy assumptions, this procedure is feasible for all sufficiently small equation errors. Numerical examples compare robustness at equal controller memory and show that certified stabilization can succeed while distinct delay models remain compatible with the same data.

0.31

Time-Invariant Control Barrier Functions for Bounded STL Safety

eess.SY ·2026-08-28 ·Avinash Malik
theory similarity 0.50
Abstract · 6 pages, 3 figures

Enforcing finite-time persistence specifications in Signal Temporal Logic typically requires formulating Control Barrier Functions within an extended state-time space. This introduces strict mathematical assumptions on global clock synchronization, rendering multi-agent execution brittle under asynchronous network delays, clock skew, and non-monotonic jitter. In this paper, we prove that for bounded-time safety tasks, explicit time dependency can be mathematically eliminated for general continuous-time nonlinear systems. By leveraging the reciprocal integral of worst-case system dissipation, we systematically compile temporal specifications into static, lower-dimensional spatial invariants. We formally prove that this time-invariant realization is strictly sound, removes the need for heuristic time-varying envelope tuning, and guarantees robust forward invariance even under severe network desynchronization.

0.18

Admissibility-Preserving Control for Block Strict-Feedback Systems Under Time-Varying Asymmetric Actuator and State Constraints

eess.SY math.DS ·2026-11-12 ·Saurabh Kumar, Lohitvel Gopikannan, Shashi Ranjan Kumar, Abhinav Sinha
theory similarity 0.49
Abstract

This paper addresses the tracking control of block strict-feedback nonlinear systems subject to time-varying asymmetric actuator and full state constraints. To that end, we develop a time-varying Admissibility-Preserving Control (APC) framework, in which the Admissibility-Preserving Input Realization (APIR) generates the plant input through a dynamic realization. The APIR guarantees input admissibility under the moving actuator set whenever each actuator bound contracts slower than the decay rate of the realization, and a closed-form lower bound on its gain is derived. The state constraints are handled by a logarithmic barrier coordinate at every backstepping step, with widths measured from the virtual control to the moving envelope of the corresponding state. We prove that every state lies inside its envelope, with each virtual control only required to remain inside the envelope of the next state, while the tracking error converges to zero exponentially. Simulations demonstrate the efficacy of the proposed safety-critical control scheme.

0.18