CS Paper Radar

Breaking speed scaling in quadrupedal robots via Huygens' coupled-pendulum dynamics

Yucheng Tao, Yongbin Jin, Shaowen Cheng, Xianwei Liu, Yanyan Yuan, Yanhong Liang, Chengkai Su, Chaojie Fu, Guorong Lan, Wei Yang, Hongtao Wang

cs.RO ·submitted 2026-09-09 10:58 UTC · v1

Abstract

Achieving biological-level running speeds has largely been pursued through advances in control algorithms, which improve the utilization of existing hardware. However, the ultimate speed limits remain governed by the underlying force and torque requirements of rapid locomotion, which are typically addressed through increased actuator capacity. Inspired by Huygens' coupled pendulums, we demonstrate that superior locomotion can emerge from principled exploitation of intrinsic dynamics rather than brute-force hardware scaling. Inter-limb inertial coupling redistributes energy across the gait cycle and reduces peak joint torque required for rapid periodic motion, thereby expanding the achievable speed without proportional increases in actuator capability. Incorporating hardware parameters as additional design variables further extends this analysis into a co-optimization framework, enabling the systematic utilization of inertial coupling in robot design. Guided by this framework, a quadruped robot achieves a running speed of 10.74 m/s (Froude number 21.4) and completes a 100-meter sprint in 12.2 seconds, representing the first legged robot to surpass 10 m/s. These results establish inertial coupling as an underlying mechanism governing high-speed legged locomotion and highlight its role in reducing force requirements, offering new insights into the design of agile robotic systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.73
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.69
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Extending the Speed Limit of Quadrupedal Locomotion via Refined Actuator Modeling and Adaptive Command Scheduling

cs.RO ·2026-09-09 ·Yucheng Tao, Shaowen Cheng, Guorong Lan, Yanyan Yuan, Yongbin Jin +1 more
top venue similarity 0.69
Abstract · Accepted for publication in IEEE Robotics and Automation Letters (RA-L)

Achieving high-speed locomotion in quadrupedal robots remains highly challenging, as actuators operate near their physical limits and exhibit pronounced nonlinearities. However, many existing methods neglect actuator nonlinearities and physical constraints during training, leading to a significant sim-to-real gap under highly dynamic motions and limiting achievable performance. To address this issue, we propose a high-speed locomotion framework that reduces sim-to-real discrepancies and stabilizes learning over a wide command distribution. A refined actuator model explicitly captures high-speed voltage coupling and magnetic saturation, enabling a more accurate representation of the torque-speed envelope. In addition, a reinforcement learning framework incorporating a two-stage curriculum and adaptive command scheduling (ACS) ensures stable training. Experiments on the 36.5 kg quadruped BlackPanther2 (BP2) demonstrate speeds of up to 13.2 m/s on a treadmill and 11.65 m/s outdoors, establishing a new state-of-the-art and, to the best of our knowledge, a world record for quadrupedal robot locomotion. The results further highlight the importance of accurate actuator modeling in preventing non-physical policy exploitation, and show that ACS improves robustness without sacrificing performance.

0.36

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.65
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27

Design and Analysis of a Nonlinear Parallel Mechanism Coupling for Dynamic Humanoid Legs

cs.RO ·2026-10-12 ·Rohit Kumar, Heiner Peters, Felix Wiebe, Franek Stark, Janne Janzen +3 more
similarity 0.61
Abstract

Humanoids increasingly demand lightweight leg mechanisms for agile, dynamic, and energy-efficient locomotion. Reducing distal inertia through proximal actuation has thus become a common design goal. Yet, compact transmissions that preserve torque capability and efficient force transmission remain hard to achieve. This paper presents a novel series-parallel leg design combining a knee parallel mechanism, an ankle parallel mechanism, and a nonlinear knee-ankle coupling where all actuators placed closer to the hip. As the knee flexes, the coupling passively assists ankle dorsiflexion for foot clearance and, as it extends it assists plantarflexion for push-off, redistributing ankle load through the knee transmission. We derive the coupling's nonlinear transmission models and validate them in simulation and on hardware. The design shows that the shared transmission lets both joints draw on each other's actuator capacity by easing the knee's peak torque demand under load and the ankle's peak speed demand during fast motion. With the leg's proximal actuator placement, the leg achieves an effective reflected mass of 0.37 kg at the foot for a 6 kg leg, demonstrating very low distal leg inertia for dynamic humanoid robots.

0.12

Hip Energized Monopedal Hopping

cs.RO ·2026-08-11 ·Shane Rozen-Levy, Griffon McMahon, Daniel Koditschek
similarity 0.61
Abstract · 35 pages, 11 figures

We present a novel stepping strategy for pitch unlocked planar monopeds where the reaction torques from stabilizing pitch with a conventional PD + feedfoward controller are recruited to counteract energetic losses from damping. By moving the location of the mass center, our controller increases the pitch stabilization torque, thereby adding energy to the gait. A new stepping policy adjusts the distribution of energy between the radial and angular degrees of freedom to counteract dissipative losses and achieve a user specified balance between steady state fore-aft speed and apex height. Hybrid averaging analysis yields closed form expressions for the fixed points and eigenvalues of the resulting gait, lending insight into the interplay between the physical and control parameters' influence on performance. Simulation studies on a generic 5 link biped and a careful model of the Penn Jerboa reveal a useful correspondence to these analytical predictions. Physical experiments on the Penn Jerboa exhibit stable locomotion with speeds ranging from 1.02 m/s to 1.77 m/s (5.10 leg lengths/s to 8.85 leg lengths/s) in a manner effectively approximated by the mathematical analysis.

0.10

QLAUN: A Research-Oriented, Robust, Agile, Modular, and Affordable Torque-Controlled Quadruped Robot

cs.RO ·2026-09-03 ·Mohamad S. Moudallal, Noel J. Maalouf
published similarity 0.61
Abstract · Extended abstract presented at IEEE ICRA@40, Rotterdam, Netherlands, September 2024. 2 pages, 1 figure

QLAUN Bot (Quad-Legged Adaptive Unmanned Navigator Robot) is a torque-controlled quadruped robot that is research-oriented, cost-effective, and aimed at achieving simultaneous robustness and agility while being completely 3D-printed. It is a quadruped robot that is aimed at empowering robotics research at universities and research institutes in Lebanon and the MENA region. Using a novel electronics-free leg design strategy, we present a modular robot with interchangeable and easily replaceable legs. The 15 kg robot possesses 12 DoF (Degrees-of-Freedom) with three per leg, each paired with a completely 3D-printed Quasi-Direct Drive (QDD) actuator that consists of a brushless DC motor and a low-ratio gearbox transmission that is connected to a belt transmission system for significantly increasing the torque outputs at the joints. We present legs that have decoupled hip and knee actuators to improve the overall modularity of the robot. QLAUN is almost completely 3D-printed using polylactic acid (PLA) and assembled using off-the-shelf parts to create a robust, agile, and affordable robot for legged robot locomotion research. The legs possess joints with wide ranges of motion, including a continuous hip flexion-extension joint. A compliant foot, printed using TPU-95A is also implemented for alleviating hard impacts and handling terrain uncertainties. This extended abstract aims to introduce QLAUN, a novel platform for robotics research, emphasizing the design concepts and principles that underpin its development to the academic and research communities in the field of robotics.

0.34

Feedback-Modulated Harmonic Policies for Quadruped Locomotion

cs.RO ·2026-09-16 ·Yixuan Jia, Steven Roche, Jonathan P. How
similarity 0.60
Abstract · 8 pages

Learned quadruped locomotion policies commonly map observations directly to joint-level actions, leaving the periodic structure of locomotion implicit in the policy. We investigate an alternative representation in which each joint trajectory is expressed as a command-conditioned Fourier series and modified online using feedback from the robot state. A context network generates the Fourier coefficients and the weights of a per-step feedback network, whose outputs adjust joint offsets, harmonic gains, frequency, and phase during execution. In simulation, we examine this explicit frequency structure alongside the hidden activations of an MLP policy that directly outputs joint targets. The harmonic waveforms change frequency and shape with commanded speed. Dynamic mode decomposition of selected MLP rollouts reveals dominant activation modes near the foot-height oscillation frequency and its second harmonic, showing periodic structure without an explicit Fourier generator. On a Unitree Go2, the simulation-trained harmonic controller records a provisional onboard-estimated peak speed of 3.67 meter per second and carries added loads up to 5.883 kilogram in separate trials.

0.32