CS Paper Radar

Extending the Speed Limit of Quadrupedal Locomotion via Refined Actuator Modeling and Adaptive Command Scheduling

Yucheng Tao, Shaowen Cheng, Guorong Lan, Yanyan Yuan, Yongbin Jin, Hongtao Wang

cs.RO ·submitted 2026-09-09 08:45 UTC · v1
top venue

Abstract

Achieving high-speed locomotion in quadrupedal robots remains highly challenging, as actuators operate near their physical limits and exhibit pronounced nonlinearities. However, many existing methods neglect actuator nonlinearities and physical constraints during training, leading to a significant sim-to-real gap under highly dynamic motions and limiting achievable performance. To address this issue, we propose a high-speed locomotion framework that reduces sim-to-real discrepancies and stabilizes learning over a wide command distribution. A refined actuator model explicitly captures high-speed voltage coupling and magnetic saturation, enabling a more accurate representation of the torque-speed envelope. In addition, a reinforcement learning framework incorporating a two-stage curriculum and adaptive command scheduling (ACS) ensures stable training. Experiments on the 36.5 kg quadruped BlackPanther2 (BP2) demonstrate speeds of up to 13.2 m/s on a treadmill and 11.65 m/s outdoors, establishing a new state-of-the-art and, to the best of our knowledge, a world record for quadrupedal robot locomotion. The results further highlight the importance of accurate actuator modeling in preventing non-physical policy exploitation, and show that ACS improves robustness without sacrificing performance.

Comment
Accepted for publication in IEEE Robotics and Automation Letters (RA-L)
Journal ref
IEEE Robotics and Automation Letters, Early Access, pp. 1-8, 2026
DOI
10.1109/LRA.2026.3726387

Closest papers

Nearest neighbours by meaning across the whole index.

Breaking speed scaling in quadrupedal robots via Huygens' coupled-pendulum dynamics

cs.RO ·2026-09-09 ·Yucheng Tao, Yongbin Jin, Shaowen Cheng, Xianwei Liu, Yanyan Yuan +6 more
similarity 0.69
Abstract

Achieving biological-level running speeds has largely been pursued through advances in control algorithms, which improve the utilization of existing hardware. However, the ultimate speed limits remain governed by the underlying force and torque requirements of rapid locomotion, which are typically addressed through increased actuator capacity. Inspired by Huygens' coupled pendulums, we demonstrate that superior locomotion can emerge from principled exploitation of intrinsic dynamics rather than brute-force hardware scaling. Inter-limb inertial coupling redistributes energy across the gait cycle and reduces peak joint torque required for rapid periodic motion, thereby expanding the achievable speed without proportional increases in actuator capability. Incorporating hardware parameters as additional design variables further extends this analysis into a co-optimization framework, enabling the systematic utilization of inertial coupling in robot design. Guided by this framework, a quadruped robot achieves a running speed of 10.74 m/s (Froude number 21.4) and completes a 100-meter sprint in 12.2 seconds, representing the first legged robot to surpass 10 m/s. These results establish inertial coupling as an underlying mechanism governing high-speed legged locomotion and highlight its role in reducing force requirements, offering new insights into the design of agile robotic systems.

0.24

Energy-Efficient Gait Adaptation via Hierarchical Reinforcement Learning for Quadrupedal Locomotion Across Diverse Terrains

cs.RO cs.LG ·2026-10-07 ·Ammar Issa, Anubhav Singh, Anton Tsaritsin, Sergey Kolyubin
similarity 0.67
Abstract · 9 pages. Submitted to IEEE ICRA 2027. Ammar Issa, Anubhav Singh, and Anton Tsaritsin contributed equally

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

0.27

Actuator Dynamics Curricula for Narrow-Viability Tasks in Legged Robot Learning

cs.RO ·2026-09-08 ·Kousheek Chakraborty, Chandan K. Rajendra, Ayham Alharbat, Abeje Y. Mersha
published similarity 0.64
Abstract · Accepted at 2026 Conference on Robot Learning (CoRL)

Reinforcement learning has produced capable controllers across a broad range of legged-robot tasks, but a subset of these tasks fail to converge under standard training: those for which most exploration trajectories terminate before producing useful gradient signal. To address such tasks we introduce the \emph{Actuator Dynamics Curriculum}, a procedure that initializes joint stiffness at a high value and anneals it toward the system-identified value as completed episode lengths grow. Using a cart-pole system as a representative example, we show that higher closed-loop joint natural frequency under critical damping enlarges the viability kernel of the underlying Markov Decision Process, increasing the fraction of initial states from which the task is feasible. We validate the kernel monotonicity on the cart-pole and apply the curriculum to a quadrupedal-to-handstand transition on the Boston Dynamics Spot, a narrow-viability task where training under fixed identified stiffness plateaus at a policy that never completes the transition. The trained policy executes the transition in simulation across 10 seeds and transfers to hardware. More broadly, our results suggest that simulated actuator dynamics is a useful axis along which to design curricula for tasks in which exploration is bottlenecked by termination conditions rather than by reward signal.

0.34

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

cs.RO ·2026-10-16 ·Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen +3 more
top venue similarity 0.64
Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

0.23

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.62
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter

cs.RO ·2026-09-14 ·Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or +1 more
similarity 0.62
Abstract · 9 pages, 10 figures

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

0.21

Around the World: Unified Learned Locomotion on a 270 g Continuous-Rotation Quadruped

cs.RO ·2026-10-02 ·Arturo Flores Alvarez, Nathan Lintu, Dennis Hong
similarity 0.62
Abstract · 13 pages, including appendices. Project website: https://submissionreview.github.io/around-the-world/

Closed-loop learned locomotion is established on commercial quadrupeds but remains uncommon at the sub-kilogram scale. Continuous-rotation legs give MiNI-Q, a 270 g quadruped, access to supporting configurations on either side of the body. We exploit this range with a single posture-conditioned reinforcement-learning policy that runs entirely onboard. A continuous joint-space reference on the torus $T^8$ and its gravity-conditioned transformation connect upright walking, inverted walking, and landing recovery without state machines or phase switching. Coordinated posture and release curricula train this behavior family; identified actuation, cross-engine validation, and embedded execution support hardware transfer. The same sub-100k-parameter network tracks forward velocity with RMSE of 0.037 m/s upright and 0.050 m/s inverted, resumes walking in 24 of 30 release trials, and operates with four interchangeable foot geometries across four indoor surfaces. Hardware experiments and simulation ablations connect these capabilities to the representation, conditioning, and training choices that exploit the platform's motion range. Demonstration videos and supplementary material are available on the project website: https://submissionreview.github.io/around-the-world/.

0.33

Feedback-Modulated Harmonic Policies for Quadruped Locomotion

cs.RO ·2026-09-16 ·Yixuan Jia, Steven Roche, Jonathan P. How
similarity 0.61
Abstract · 8 pages

Learned quadruped locomotion policies commonly map observations directly to joint-level actions, leaving the periodic structure of locomotion implicit in the policy. We investigate an alternative representation in which each joint trajectory is expressed as a command-conditioned Fourier series and modified online using feedback from the robot state. A context network generates the Fourier coefficients and the weights of a per-step feedback network, whose outputs adjust joint offsets, harmonic gains, frequency, and phase during execution. In simulation, we examine this explicit frequency structure alongside the hidden activations of an MLP policy that directly outputs joint targets. The harmonic waveforms change frequency and shape with commanded speed. Dynamic mode decomposition of selected MLP rollouts reveals dominant activation modes near the foot-height oscillation frequency and its second harmonic, showing periodic structure without an explicit Fourier generator. On a Unitree Go2, the simulation-trained harmonic controller records a provisional onboard-estimated peak speed of 3.67 meter per second and carries added loads up to 5.883 kilogram in separate trials.

0.32