CS Paper Radar

Learning-Based 3D Reconstruction of Power Networks from Aerial Point Clouds

Rishabh Jain, Anuja Saini, Vishal Jain

eess.IV cs.CVcs.LG ·submitted 2026-09-20 22:43 UTC · v1
published

Abstract

This paper presents an end-to-end framework for reconstructing overhead power utility network topology and extracting span-level physical metadata from large-scale aerial LiDAR. The pipeline begins with semantic segmentation of the input point cloud using an improved KPConv-based model, in which data sampling and loss functions are adapted to emphasize pole and conductor (wire) classes. Network topology inference then proceeds in two stages: (i) pole instances are obtained by clustering pole-class points and validating candidates using geometric criteria, including height and verticality estimated via PCA, and (ii) candidate pole pairs are evaluated using a heuristic method and a lightweight ResNet-based classifier on 2D top-view projections of pole and wire point distributions to determine whether a physical conductor span exists. By explicitly classifying candidate spans, the approach mitigates common failure modes of heuristic connectivity rules in dense or cluttered scenes and under partial wire observation. For each validated wire, attributes regarding utility infrastructure geometry are computed, including endpoint conductor heights, ground elevation, sag-related lowest-point features, conductor arrangement, and wire width. Evaluation on multiple real-world aerial LiDAR datasets demonstrates decimeter-level endpoint height accuracy and approximately 9% relative improvement in recall for topology reconstruction compared to heuristic nearest-neighbor baselines, with larger gains in complex layouts.

Comment
5 pages, 6 figures. Accepted for oral presentation at IEEE IGARSS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Reconstruction of Power Lines from Incomplete Mobile and Aerial LiDAR Data

cs.CV ·2026-11-03 ·Mohamed Gaha, Damos Ayobo Abongo, Philippe Massicotte, Eya Ben Kacem, Wael Jaafar +2 more
code/data similarity 0.78
Abstract · 15 pages, 9 figures

Accurate vegetation-encroachment assessment and risk mitigation require electric utilities to accurately locate and characterize distribution-network assets, including poles and power lines, and distinguish among medium-voltage, low-voltage, neutral, and telecommunication lines. Mobile and aerial Light Detection and Ranging (LiDAR) point clouds provide detailed 3D representations of these assets and their surroundings. However, power-line detection and reconstruction remain challenging because conductor returns are often sparse, incomplete, noisy, or occluded by vegetation. These challenges are especially significant in distribution networks, where lower pole heights and complex line configurations place conductors close to trees. In addition, mobile and aerial LiDAR datasets differ substantially in point density, viewing geometry, spatial coverage, and occlusion patterns. We propose a robust and automated reconstruction method combining scaled density-based clustering, robust polynomial fitting, and iterative fragment merging to recover individual conductors under severe data incompleteness and occlusion. Following semantic classification, the same reconstruction pipeline processes both mobile and aerial LiDAR data without modality-specific code or parameter tuning. The method is evaluated through degradation experiments, benchmarking, parameter sensitivity analysis, and large-scale validation. On the aerial dataset, it achieves 96.87% precision, 96.66% recall, a 96.76% F$_1$-score, and a geometric RMSE of 0.127 m. On the mobile dataset, where conductor-level reference annotations were unavailable, it achieves a point-to-model RMSE of 0.045 m and a reconstruction coverage of 95.27%. Source code, documentation, and evaluation data are publicly available at https://github.com/varen-project.

0.29

Power Line Detection in Point Clouds with Point-SAM and RANSAC

cs.CV ·2026-11-16 ·Christoph Dalitz, Oskar Waedt, Steffen Goebbels, Mahdieh Shamsadini Motlagh, Gabriel Gerzabek
publishedcode/data similarity 0.67
Abstract · 8 pages, 10 figures, accepted for VISAPP 2027

This article deals with the problem of detecting the position of power lines in airborne laser scanning point clouds. We address both the problem of segmenting power lines from background like ground and vegetation and of identifying individual lines. For segmentation we compare a rule-based approach with one based on transfer learning (Point-SAM). For individual line detection, we derive the mathematical formulas for RANSAC applied to 3D catenaries and compare it with a non-parametric method (TriplClust). All methods are evaluated on a newly created dataset "PowLiDFR", which we make publicly available. The samples have been taken from the French project LiDAR HD and cover a variety of terrain layouts and point cloud resolutions. On this dataset, an unsupervised transfer learning outperformed a mere rule-based segmentation, and for individual power line detection, RANSAC was better in following the shape of catenaries than the non-parametric algorithm.

0.54

CedarCypress3D: an annotated UAV-LiDAR dataset of individual trees in planted cedar and cypress forests

cs.CV ·2026-08-31 ·Katsuto Shimizu, Fumiaki Kitahara, Tomohiro Nishizono, Hideki Saito, Masayoshi Takahashi +6 more
code/data similarity 0.58
Abstract · 15 pages, 8 figures

Individual tree measurements derived from Light Detection and Ranging (LiDAR) mounted on Unmanned Aerial Vehicles (UAV) provide valuable information for forest inventory, ecosystem monitoring, and sustainable forest management. Recent advancements in machine learning have increased the demand for annotated datasets to develop and evaluate point cloud-based approaches, especially for individual tree segmentation. However, publicly available annotated UAV-LiDAR datasets in temperate forests are limited. In this article, we present CedarCypress3D, a manually annotated UAV-LiDAR dataset collected in Japanese cedar (Cryptomeria japonica) and Japanese cypress (Chamaecyparis obtusa) plantations in Japan. The dataset consists of UAV-LiDAR point clouds and field survey measurements from 34 circular plots across two sites with different topographic characteristics, along with terrestrial LiDAR point clouds available for a subset of 22 plots. A total of 1,627 trees were measured in the census field survey and manually annotated to match the corresponding trees in the UAV-LiDAR point clouds. For the subset of plots with terrestrial LiDAR data, semantic labels (i.e., stem and non-stem) were additionally assigned to tree points in the UAV-LiDAR data. CedarCypress3D provides high-quality annotated UAV-LiDAR data for developing and evaluating individual tree instance segmentation and semantic segmentation methods in temperate planted forests. The dataset can also support research on tree attribute prediction and multi-platform LiDAR analysis. The dataset is publicly available at https://doi.org/10.5281/zenodo.22168721.

0.33

RaSFNet: Ray-aligned and Scan-aware Fusion Network for LiDAR Semantic Segmentation

cs.CV cs.LG ·2026-10-22 ·Chuang Chen
similarity 0.57
Abstract

LiDAR point cloud semantic segmentation is a fundamental component of 3D perception for autonomous driving and robotics. Projection-based methods map 3D point clouds into 2D representations for feature extraction using 2D networks. However, aggregating multiple points during projection can obscure geometric differences within each frustum, while local feature extraction limits the modeling of spatial relationships across scanning regions. Moreover, proximity in the projected representation does not necessarily imply proximity in 3D space, and interactions between point and projected features may mix features from different ranges, reducing semantic discriminability. To address these challenges, we propose the Ray-aligned and Scan-aware Fusion Network (RaSFNet), which incorporates point cloud geometry and LiDAR scanning characteristics into projection-based semantic segmentation. Specifically, the Ray-Aligned Geometric Distribution Encoding (RAGDE) module characterizes point distributions within each frustum using a ray-aligned coordinate system. To model spatial context, a Scan-Topology-Aware Mamba (STAM) block organizes frustum features according to the LiDAR azimuth sampling pattern and captures long-range dependencies across scanning regions. In addition, a Range-Constrained Point-Frustum Fusion (RCPFF) mechanism uses shared range information to guide feature exchange between point and frustum representations while maintaining spatial correspondence. RaSFNet achieves mIoU scores of 70.2% and 77.7% on the SemanticKITTI and nuScenes validation sets, respectively, indicating competitive segmentation performance compared with the evaluated methods.

0.12

From Geometry to Function: A Multi-Task LiDAR Benchmark Dataset for Semantic and Functional Parsing of Urban Facades

cs.CV cs.AIcs.GRcs.LG ·2026-11-05 ·Abdiaziz Muse, Tooba Javed, Tao Pu, Jiju Poovvancheri, Dong Chen
publishedbenchmarkcode/data similarity 0.56
Abstract · Accepted to WACV 2027. 19 pages (8 main + supplementary), includes appendix. Project page: https://jijup.github.io/hfx3d-benchmark/ ; Code: …

Understanding building facades is central to urban digital twins, heritage modelling, and sustainable city analysis, yet existing LiDAR benchmarks stop at geometry and semantic segmentation and offer little support for reasoning about the functional role of each architectural element. We introduce HFX3D, a large-scale urban facade benchmark of approximately 492 million LiDAR points from 26 buildings in Halifax, Canada, captured across four seasons, day and night, and varied weather. Each facade is annotated at three tiers, semantic, instance, and per-instance functional attributes, making it, to our knowledge, the first facade dataset to pair geometry and semantics with functional labels. Annotations are produced by a semi-automatic pipeline that combines geometry-guided heuristics with expert validation. We benchmark representative point-based, graph-based, convolutional, and transformer architectures and find that semantic segmentation is already challenging under severe class imbalance, while instance separation of repetitive structures and functional reasoning from geometry are substantially harder. The benchmark establishes a new foundation for function-aware 3D urban understanding. Project page: https://jijup.github.io/hfx3d-benchmark/ ; code: https://github.com/jijup/hfx3d-benchmark

0.48

Role-based Effectiveness of an Epistemic Uncertainty Estimate in Training Models for Semantic Segmentation of 3D LiDAR Point Clouds

cs.CV cs.LG ·2026-11-03 ·Krishnakumar N, Jaya Sreevalsan-Nair
hot direction similarity 0.56
Abstract · 23 pages, 7 figures, 10 tables

Point cloud segmentation is a fundamental task in 3D data analysis, with applications across robotics, augmented and virtual reality, and remote sensing. However, the inherent sparsity, noise, and unordered nature of point clouds introduce significant challenges, particularly in achieving reliable classification. While the state-of-the-art rely on training models for explicit modeling of uncertainty, there is a gap in exploring different roles that estimated uncertainty using generative approaches can play. This work investigates the impact of deterministic uncertainty in point cloud segmentation by explicitly modeling epistemic uncertainty and using it in different roles, namely, as a feature and in loss function. We evaluate a baseline artificial neural network (ANN) and two uncertainty-aware variants (uncertainty as an additional input feature and as a per-sample confidence weight in the training loss) on four large-scale LiDAR benchmarks spanning airborne and mobile acquisition, namely ISPRS Vaihingen, AHN3, Paris-Lille-3D, and Toronto-3D, together with PointNet++ and RandLA-Net references and their uncertainty-augmented counterparts under canonical spatially disjoint train and test splits. Under this protocol, uncertainty-aware modeling improves mean Intersection over Union, recovers minority classes that the baseline ANN never predicts at all, and in half of the configurations improves the alignment between prediction error and estimated uncertainty as measured by Patch Accuracy versus Patch Uncertainty. Our findings indicate that uncertainty can play multiple roles in the segmentation pipeline rather than as a device for improving accuracy alone.

0.31

The Role of Radiometric Features in Cross-Site Leaf-Wood Segmentation of LiDAR Point Clouds

cs.CV ·2026-09-18 ·Roman Kaharlytskyi, Derek T. Robinson, Roberto Guglielmi
published similarity 0.55
Abstract · 5 pages, 6 figures. Accepted for presentation at IGARSS 2026 (IEEE International Geoscience and Remote Sensing Symposium)

Leaf-wood segmentation of individual trees from LiDAR point clouds is essential for quantitative structure models (QSMs) used in non-destructive biomass estimation. Existing segmentation methods typically exclude radiometric features (e.g., intensity, return number) to maximize cross-sensor compatibility. We challenge this design choice by evaluating cross-site and cross-platform generalization: training on the public Heidelberg dataset (terrestrial TLS, 1550nm) and testing on a novel dataset from Ontario, Canada (RPA-LS, 905nm). Results show that geometry-only methods - including state-of-the-art deep learning models trained on high-density LiDAR datasets - fail to generalize to the sparse, top-down geometry of aerial scans, achieving F1 scores <= 0.56. Incorporating radiometric features (intensity, return number, number of returns) improves F1 to 0.61, but more critically, increases wood recall by 119% from 0.16 to 0.35. Furthermore, geometry-only approaches often result in fragmented stem and branch components. We find that leveraging radiometric features preserves greater structural connectivity, resulting in more coherent architectures that are better suited for QSM reconstruction. We demonstrate that while geometric patterns are view-dependent and prone to overfitting scan patterns, radiometric features encode physical material properties that generalize across disparate sensors and environments.

0.32

Aerial Content-Aware Sample-Adaptive Classifier for Urban Photogrammetric Point Cloud Segmentation

cs.CV ·2026-11-02 ·Chong Liu, Yonghua Lu, Zhanglin Cheng
similarity 0.55
Abstract

Urban photogrammetric point clouds are commonly processed as local 3D patches, limiting the context available for distinguishing geometrically similar categories. Orthographic projection of the same data yields a co-registered digital orthophoto map (DOM)/RGB-D representation that supports efficient large-context modeling but compresses vertical geometry. Existing projection--point methods mainly fuse these two representations at the feature level while retaining a classifier shared across all samples. We present the Aerial Content-Aware Sample-Adaptive Classifier (ACASAC), which complements feature fusion with decision-level adaptation. A point-aligned aerial region bridges the full aerial crop and local 3D patch. ACASAC models scene-to-local variation within the projection and the representation discrepancy between aligned 2D and 3D supports, then transfers both relations to refine the local point class representation. The refined representation, scene-level aerial context, and fixed fused-head prior jointly form a classifier for the current sample. ACASAC improves the fixed dual-representation head by 2.1 and 2.7 mIoU points on SensatUrban and UrbanBIS, respectively, and by 2.1--2.3 points across four tested encoder combinations.

0.30