CS Paper Radar

Robust Reconstruction of Power Lines from Incomplete Mobile and Aerial LiDAR Data

Mohamed Gaha, Damos Ayobo Abongo, Philippe Massicotte, Eya Ben Kacem, Wael Jaafar, Rami Langar, Christian Buteau

cs.CV ·submitted 2026-11-03 16:48 UTC · v2
code/data

Abstract

Accurate vegetation-encroachment assessment and risk mitigation require electric utilities to accurately locate and characterize distribution-network assets, including poles and power lines, and distinguish among medium-voltage, low-voltage, neutral, and telecommunication lines. Mobile and aerial Light Detection and Ranging (LiDAR) point clouds provide detailed 3D representations of these assets and their surroundings. However, power-line detection and reconstruction remain challenging because conductor returns are often sparse, incomplete, noisy, or occluded by vegetation. These challenges are especially significant in distribution networks, where lower pole heights and complex line configurations place conductors close to trees. In addition, mobile and aerial LiDAR datasets differ substantially in point density, viewing geometry, spatial coverage, and occlusion patterns. We propose a robust and automated reconstruction method combining scaled density-based clustering, robust polynomial fitting, and iterative fragment merging to recover individual conductors under severe data incompleteness and occlusion. Following semantic classification, the same reconstruction pipeline processes both mobile and aerial LiDAR data without modality-specific code or parameter tuning. The method is evaluated through degradation experiments, benchmarking, parameter sensitivity analysis, and large-scale validation. On the aerial dataset, it achieves 96.87% precision, 96.66% recall, a 96.76% F$_1$-score, and a geometric RMSE of 0.127 m. On the mobile dataset, where conductor-level reference annotations were unavailable, it achieves a point-to-model RMSE of 0.045 m and a reconstruction coverage of 95.27%. Source code, documentation, and evaluation data are publicly available at https://github.com/varen-project.

Comment
15 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Learning-Based 3D Reconstruction of Power Networks from Aerial Point Clouds

eess.IV cs.CVcs.LG ·2026-09-20 ·Rishabh Jain, Anuja Saini, Vishal Jain
published similarity 0.78
Abstract · 5 pages, 6 figures. Accepted for oral presentation at IEEE IGARSS 2026

This paper presents an end-to-end framework for reconstructing overhead power utility network topology and extracting span-level physical metadata from large-scale aerial LiDAR. The pipeline begins with semantic segmentation of the input point cloud using an improved KPConv-based model, in which data sampling and loss functions are adapted to emphasize pole and conductor (wire) classes. Network topology inference then proceeds in two stages: (i) pole instances are obtained by clustering pole-class points and validating candidates using geometric criteria, including height and verticality estimated via PCA, and (ii) candidate pole pairs are evaluated using a heuristic method and a lightweight ResNet-based classifier on 2D top-view projections of pole and wire point distributions to determine whether a physical conductor span exists. By explicitly classifying candidate spans, the approach mitigates common failure modes of heuristic connectivity rules in dense or cluttered scenes and under partial wire observation. For each validated wire, attributes regarding utility infrastructure geometry are computed, including endpoint conductor heights, ground elevation, sag-related lowest-point features, conductor arrangement, and wire width. Evaluation on multiple real-world aerial LiDAR datasets demonstrates decimeter-level endpoint height accuracy and approximately 9% relative improvement in recall for topology reconstruction compared to heuristic nearest-neighbor baselines, with larger gains in complex layouts.

0.44

Power Line Detection in Point Clouds with Point-SAM and RANSAC

cs.CV ·2026-11-16 ·Christoph Dalitz, Oskar Waedt, Steffen Goebbels, Mahdieh Shamsadini Motlagh, Gabriel Gerzabek
publishedcode/data similarity 0.69
Abstract · 8 pages, 10 figures, accepted for VISAPP 2027

This article deals with the problem of detecting the position of power lines in airborne laser scanning point clouds. We address both the problem of segmenting power lines from background like ground and vegetation and of identifying individual lines. For segmentation we compare a rule-based approach with one based on transfer learning (Point-SAM). For individual line detection, we derive the mathematical formulas for RANSAC applied to 3D catenaries and compare it with a non-parametric method (TriplClust). All methods are evaluated on a newly created dataset "PowLiDFR", which we make publicly available. The samples have been taken from the French project LiDAR HD and cover a variety of terrain layouts and point cloud resolutions. On this dataset, an unsupervised transfer learning outperformed a mere rule-based segmentation, and for individual power line detection, RANSAC was better in following the shape of catenaries than the non-parametric algorithm.

0.54

CedarCypress3D: an annotated UAV-LiDAR dataset of individual trees in planted cedar and cypress forests

cs.CV ·2026-08-31 ·Katsuto Shimizu, Fumiaki Kitahara, Tomohiro Nishizono, Hideki Saito, Masayoshi Takahashi +6 more
code/data similarity 0.60
Abstract · 15 pages, 8 figures

Individual tree measurements derived from Light Detection and Ranging (LiDAR) mounted on Unmanned Aerial Vehicles (UAV) provide valuable information for forest inventory, ecosystem monitoring, and sustainable forest management. Recent advancements in machine learning have increased the demand for annotated datasets to develop and evaluate point cloud-based approaches, especially for individual tree segmentation. However, publicly available annotated UAV-LiDAR datasets in temperate forests are limited. In this article, we present CedarCypress3D, a manually annotated UAV-LiDAR dataset collected in Japanese cedar (Cryptomeria japonica) and Japanese cypress (Chamaecyparis obtusa) plantations in Japan. The dataset consists of UAV-LiDAR point clouds and field survey measurements from 34 circular plots across two sites with different topographic characteristics, along with terrestrial LiDAR point clouds available for a subset of 22 plots. A total of 1,627 trees were measured in the census field survey and manually annotated to match the corresponding trees in the UAV-LiDAR point clouds. For the subset of plots with terrestrial LiDAR data, semantic labels (i.e., stem and non-stem) were additionally assigned to tree points in the UAV-LiDAR data. CedarCypress3D provides high-quality annotated UAV-LiDAR data for developing and evaluating individual tree instance segmentation and semantic segmentation methods in temperate planted forests. The dataset can also support research on tree attribute prediction and multi-platform LiDAR analysis. The dataset is publicly available at https://doi.org/10.5281/zenodo.22168721.

0.33

Autonomous 3D Visual-Thermal Inspection for Utility-Scale Solar Farms

cs.AI cs.CVcs.RO ·2026-10-13 ·Lachlan Tychsen-Smith, Mark Cox, Brett Wood, David Haddon, Kenrick Anderson +4 more
published similarity 0.58
Abstract · Accepted at the 2026 Asia-Pacific Solar Research Conference (APSRC 2026), Canberra, Australia, 1-3 December 2026

Utility-scale photovoltaic (PV) inspection is dominated by aerial surveys, which are effective for identifying module-level hot cells but provide limited visibility of critical components located under the array, including connectors, cabling, fasteners and structural elements. These assets are difficult to inspect consistently at scale, and their defects are often spatially small, partially occluded and difficult to localise from isolated images. We present an automated 3D visual-thermal inspection system (Tricorder) for under-panel PV asset inspection. The approach combines LiDAR-inertial Simultaneous Localization and Mapping (SLAM) with geometrically calibrated RGB and thermal imagery and machine-learning-based object detection and segmentation. Detected assets are associated with the reconstructed 3D environment, allowing visual and thermal observations from multiple viewpoints to be spatially fused and localised. We demonstrate the approach on utility-scale PV data for MC4 connector detection and connection-state recognition, thermal anomaly identification, and detection of structural components including bolts, nuts and torque tubes. The results demonstrate a pathway from image-based inspection toward spatially grounded autonomous inspection, where defects are detected and linked to specific assets and their 3D locations within the solar farm.

0.28

The Role of Radiometric Features in Cross-Site Leaf-Wood Segmentation of LiDAR Point Clouds

cs.CV ·2026-09-18 ·Roman Kaharlytskyi, Derek T. Robinson, Roberto Guglielmi
published similarity 0.56
Abstract · 5 pages, 6 figures. Accepted for presentation at IGARSS 2026 (IEEE International Geoscience and Remote Sensing Symposium)

Leaf-wood segmentation of individual trees from LiDAR point clouds is essential for quantitative structure models (QSMs) used in non-destructive biomass estimation. Existing segmentation methods typically exclude radiometric features (e.g., intensity, return number) to maximize cross-sensor compatibility. We challenge this design choice by evaluating cross-site and cross-platform generalization: training on the public Heidelberg dataset (terrestrial TLS, 1550nm) and testing on a novel dataset from Ontario, Canada (RPA-LS, 905nm). Results show that geometry-only methods - including state-of-the-art deep learning models trained on high-density LiDAR datasets - fail to generalize to the sparse, top-down geometry of aerial scans, achieving F1 scores <= 0.56. Incorporating radiometric features (intensity, return number, number of returns) improves F1 to 0.61, but more critically, increases wood recall by 119% from 0.16 to 0.35. Furthermore, geometry-only approaches often result in fragmented stem and branch components. We find that leveraging radiometric features preserves greater structural connectivity, resulting in more coherent architectures that are better suited for QSM reconstruction. We demonstrate that while geometric patterns are view-dependent and prone to overfitting scan patterns, radiometric features encode physical material properties that generalize across disparate sensors and environments.

0.32

Provisioning Robust and Efficient LiDAR Perception for Autonomous Driving

cs.CV ·2026-10-20 ·Tingxu Han, Zijie Shen, An Guo, Lyuke Wang, Chunrong Fang +2 more
code/data similarity 0.56
Abstract

LiDAR-based 3D object detection is a core perception service for autonomous driving, but deployment requires robustness to point-cloud corruption while meeting latency and memory requirements. Existing approaches address robustness and resource efficiency separately, resulting in compact detectors that are fragile under corruption or robust detectors that remain costly to deploy. We therefore formulate LiDAR perception provisioning as constructing a detector that remains accurate under point-cloud corruptions while meeting constraints on inference latency and peak GPU memory. To achieve robustness, we first craft corrupted samples that mimic extreme weather conditions. Then we train candidate detectors offline by ordering clean and corrupted samples by perturbation sensitivity, through which detectors learn more from hard corrupted samples. We estimate perturbation sensitivity using an ensemble of seven heterogeneous 3D detectors by tracking changes in confidence, BEV overlap, and unmatched detections. To improve efficiency, we narrow the network and use offline neighborhood-density measurements to determine how many points and neighbors each sampling stage processes. We evaluate our method using AP (Average Precision) under clean and corrupted conditions, inference latency, and peak allocated GPU memory. On KITTI for Car detection with PointRCNN, our method improves Moderate AP under corruption by 3.32 points over the original detector while reducing mean latency by 19.8% and peak allocated GPU memory by 53.9%. Across two datasets, two detector architectures, and three object classes, our method improves AP under corruption by 4.03 points on average over the corresponding original detectors, while reducing mean inference latency and peak allocated GPU memory by 14.4% and 38.0%, respectively. Our code is available at https://github.com/drunklibai/robust-efficient-lidar-perception.

0.20

Role-based Effectiveness of an Epistemic Uncertainty Estimate in Training Models for Semantic Segmentation of 3D LiDAR Point Clouds

cs.CV cs.LG ·2026-11-03 ·Krishnakumar N, Jaya Sreevalsan-Nair
hot direction similarity 0.56
Abstract · 23 pages, 7 figures, 10 tables

Point cloud segmentation is a fundamental task in 3D data analysis, with applications across robotics, augmented and virtual reality, and remote sensing. However, the inherent sparsity, noise, and unordered nature of point clouds introduce significant challenges, particularly in achieving reliable classification. While the state-of-the-art rely on training models for explicit modeling of uncertainty, there is a gap in exploring different roles that estimated uncertainty using generative approaches can play. This work investigates the impact of deterministic uncertainty in point cloud segmentation by explicitly modeling epistemic uncertainty and using it in different roles, namely, as a feature and in loss function. We evaluate a baseline artificial neural network (ANN) and two uncertainty-aware variants (uncertainty as an additional input feature and as a per-sample confidence weight in the training loss) on four large-scale LiDAR benchmarks spanning airborne and mobile acquisition, namely ISPRS Vaihingen, AHN3, Paris-Lille-3D, and Toronto-3D, together with PointNet++ and RandLA-Net references and their uncertainty-augmented counterparts under canonical spatially disjoint train and test splits. Under this protocol, uncertainty-aware modeling improves mean Intersection over Union, recovers minority classes that the baseline ANN never predicts at all, and in half of the configurations improves the alignment between prediction error and estimated uncertainty as measured by Patch Accuracy versus Patch Uncertainty. Our findings indicate that uncertainty can play multiple roles in the segmentation pipeline rather than as a device for improving accuracy alone.

0.31

Bayesian methods and Markov chain Monte Carlo algorithms for curve reconstruction and point cloud data analysis

cs.LG stat.ML ·2026-08-27 ·Asir Intesar Tushar, Ioannis Sgouralis
similarity 0.55
Abstract · 32 pages and 12 figures

Point-cloud data routinely captured by modern imaging and sensor technologies provide detailed geometric descriptions of objects and environments, but their analysis is hindered by large data volumes, localization noise, and missing information. In addition, existing point-cloud reconstruction pipelines typically return a single best-fit structure without uncertainty quantification. We introduce a fully Bayesian framework for representing point-cloud data and reconstructing closed curves, in which observed points are modeled as noisy perturbations of latent locations constrained to lie on the underlying curve that is regularized by a non-parametric prior. Posterior inference in our framework is carried out using a series of Markov chain Monte Carlo samplers tailored to point-cloud characteristics. Numerical experiments, including synthetic examples and real-world LiDAR datasets, show accurate reconstructions and quantified uncertainty over the recovered curves.

0.28