CS Paper Radar

Power Line Detection in Point Clouds with Point-SAM and RANSAC

Christoph Dalitz, Oskar Waedt, Steffen Goebbels, Mahdieh Shamsadini Motlagh, Gabriel Gerzabek

cs.CV ·submitted 2026-11-16 17:25 UTC · v2
publishedcode/data

Abstract

This article deals with the problem of detecting the position of power lines in airborne laser scanning point clouds. We address both the problem of segmenting power lines from background like ground and vegetation and of identifying individual lines. For segmentation we compare a rule-based approach with one based on transfer learning (Point-SAM). For individual line detection, we derive the mathematical formulas for RANSAC applied to 3D catenaries and compare it with a non-parametric method (TriplClust). All methods are evaluated on a newly created dataset "PowLiDFR", which we make publicly available. The samples have been taken from the French project LiDAR HD and cover a variety of terrain layouts and point cloud resolutions. On this dataset, an unsupervised transfer learning outperformed a mere rule-based segmentation, and for individual power line detection, RANSAC was better in following the shape of catenaries than the non-parametric algorithm.

Comment
8 pages, 10 figures, accepted for VISAPP 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Reconstruction of Power Lines from Incomplete Mobile and Aerial LiDAR Data

cs.CV ·2026-11-03 ·Mohamed Gaha, Damos Ayobo Abongo, Philippe Massicotte, Eya Ben Kacem, Wael Jaafar +2 more
code/data similarity 0.69
Abstract · 15 pages, 9 figures

Accurate vegetation-encroachment assessment and risk mitigation require electric utilities to accurately locate and characterize distribution-network assets, including poles and power lines, and distinguish among medium-voltage, low-voltage, neutral, and telecommunication lines. Mobile and aerial Light Detection and Ranging (LiDAR) point clouds provide detailed 3D representations of these assets and their surroundings. However, power-line detection and reconstruction remain challenging because conductor returns are often sparse, incomplete, noisy, or occluded by vegetation. These challenges are especially significant in distribution networks, where lower pole heights and complex line configurations place conductors close to trees. In addition, mobile and aerial LiDAR datasets differ substantially in point density, viewing geometry, spatial coverage, and occlusion patterns. We propose a robust and automated reconstruction method combining scaled density-based clustering, robust polynomial fitting, and iterative fragment merging to recover individual conductors under severe data incompleteness and occlusion. Following semantic classification, the same reconstruction pipeline processes both mobile and aerial LiDAR data without modality-specific code or parameter tuning. The method is evaluated through degradation experiments, benchmarking, parameter sensitivity analysis, and large-scale validation. On the aerial dataset, it achieves 96.87% precision, 96.66% recall, a 96.76% F$_1$-score, and a geometric RMSE of 0.127 m. On the mobile dataset, where conductor-level reference annotations were unavailable, it achieves a point-to-model RMSE of 0.045 m and a reconstruction coverage of 95.27%. Source code, documentation, and evaluation data are publicly available at https://github.com/varen-project.

0.29

Learning-Based 3D Reconstruction of Power Networks from Aerial Point Clouds

eess.IV cs.CVcs.LG ·2026-09-20 ·Rishabh Jain, Anuja Saini, Vishal Jain
published similarity 0.67
Abstract · 5 pages, 6 figures. Accepted for oral presentation at IEEE IGARSS 2026

This paper presents an end-to-end framework for reconstructing overhead power utility network topology and extracting span-level physical metadata from large-scale aerial LiDAR. The pipeline begins with semantic segmentation of the input point cloud using an improved KPConv-based model, in which data sampling and loss functions are adapted to emphasize pole and conductor (wire) classes. Network topology inference then proceeds in two stages: (i) pole instances are obtained by clustering pole-class points and validating candidates using geometric criteria, including height and verticality estimated via PCA, and (ii) candidate pole pairs are evaluated using a heuristic method and a lightweight ResNet-based classifier on 2D top-view projections of pole and wire point distributions to determine whether a physical conductor span exists. By explicitly classifying candidate spans, the approach mitigates common failure modes of heuristic connectivity rules in dense or cluttered scenes and under partial wire observation. For each validated wire, attributes regarding utility infrastructure geometry are computed, including endpoint conductor heights, ground elevation, sag-related lowest-point features, conductor arrangement, and wire width. Evaluation on multiple real-world aerial LiDAR datasets demonstrates decimeter-level endpoint height accuracy and approximately 9% relative improvement in recall for topology reconstruction compared to heuristic nearest-neighbor baselines, with larger gains in complex layouts.

0.44

CedarCypress3D: an annotated UAV-LiDAR dataset of individual trees in planted cedar and cypress forests

cs.CV ·2026-08-31 ·Katsuto Shimizu, Fumiaki Kitahara, Tomohiro Nishizono, Hideki Saito, Masayoshi Takahashi +6 more
code/data similarity 0.60
Abstract · 15 pages, 8 figures

Individual tree measurements derived from Light Detection and Ranging (LiDAR) mounted on Unmanned Aerial Vehicles (UAV) provide valuable information for forest inventory, ecosystem monitoring, and sustainable forest management. Recent advancements in machine learning have increased the demand for annotated datasets to develop and evaluate point cloud-based approaches, especially for individual tree segmentation. However, publicly available annotated UAV-LiDAR datasets in temperate forests are limited. In this article, we present CedarCypress3D, a manually annotated UAV-LiDAR dataset collected in Japanese cedar (Cryptomeria japonica) and Japanese cypress (Chamaecyparis obtusa) plantations in Japan. The dataset consists of UAV-LiDAR point clouds and field survey measurements from 34 circular plots across two sites with different topographic characteristics, along with terrestrial LiDAR point clouds available for a subset of 22 plots. A total of 1,627 trees were measured in the census field survey and manually annotated to match the corresponding trees in the UAV-LiDAR point clouds. For the subset of plots with terrestrial LiDAR data, semantic labels (i.e., stem and non-stem) were additionally assigned to tree points in the UAV-LiDAR data. CedarCypress3D provides high-quality annotated UAV-LiDAR data for developing and evaluating individual tree instance segmentation and semantic segmentation methods in temperate planted forests. The dataset can also support research on tree attribute prediction and multi-platform LiDAR analysis. The dataset is publicly available at https://doi.org/10.5281/zenodo.22168721.

0.33

The Role of Radiometric Features in Cross-Site Leaf-Wood Segmentation of LiDAR Point Clouds

cs.CV ·2026-09-18 ·Roman Kaharlytskyi, Derek T. Robinson, Roberto Guglielmi
published similarity 0.57
Abstract · 5 pages, 6 figures. Accepted for presentation at IGARSS 2026 (IEEE International Geoscience and Remote Sensing Symposium)

Leaf-wood segmentation of individual trees from LiDAR point clouds is essential for quantitative structure models (QSMs) used in non-destructive biomass estimation. Existing segmentation methods typically exclude radiometric features (e.g., intensity, return number) to maximize cross-sensor compatibility. We challenge this design choice by evaluating cross-site and cross-platform generalization: training on the public Heidelberg dataset (terrestrial TLS, 1550nm) and testing on a novel dataset from Ontario, Canada (RPA-LS, 905nm). Results show that geometry-only methods - including state-of-the-art deep learning models trained on high-density LiDAR datasets - fail to generalize to the sparse, top-down geometry of aerial scans, achieving F1 scores <= 0.56. Incorporating radiometric features (intensity, return number, number of returns) improves F1 to 0.61, but more critically, increases wood recall by 119% from 0.16 to 0.35. Furthermore, geometry-only approaches often result in fragmented stem and branch components. We find that leveraging radiometric features preserves greater structural connectivity, resulting in more coherent architectures that are better suited for QSM reconstruction. We demonstrate that while geometric patterns are view-dependent and prone to overfitting scan patterns, radiometric features encode physical material properties that generalize across disparate sensors and environments.

0.32

UrbanTwin Sim2Real LiDAR Challenge 2026: Site-Calibrated Synthetic Data and Multi-Detector Fusion for Roadside 3D Detection

cs.CV eess.SP ·2026-11-16 ·Arnav Kumar, Brijesh Soni
similarity 0.56
Abstract

This report summarizes the work submitted by team arnav007 (submission ID 1054222) for the UrbanTwin Sim2Real LiDAR Challenge (V2X-Real track) at the IEEE BigData Cup 2026. The primary objective is to train 3D detectors for vehicles, pedestrians, and trucks using only synthetic roadside LiDAR data, and to generate synthetic scans that are realistic enough to be indistinguishable from real ones. A CARLA based pipeline is developed and calibrated to the fixed sensor site, accurately modeling the range image, including no-return beams, based on unlabelled real development scans. A combined inference detector, using multiple 3D detectors (VoxelNeXt, PV-RCNN, and SECOND) trained exclusively on synthetic data, is also proposed. Each scan is aligned to the synthetic ground plane and processed through the detectors at multiple ground heights. The resulting bounding boxes are fused using bird's-eye view (BEV) clustering, followed by class-specific post-processing to refine heading, box size, and filter low-confidence detections. The final submission achieved a combined score of 0.8947. The ablation study shows that per-scan ground leveling more than doubled the real-scan mAP, while fusing boxes across different heights and models further improved performance.

0.21

Reducing the Gap Between Spatial and Space-Filling Curve Neighbors in 3D Point Cloud Segmentation

cs.CV ·2026-10-14 ·Konan Sasaki, Junya Komori, Kazuhiro Hotta
published similarity 0.55
Abstract · Accepted by ECCV2026 Workshop "3rd Workshop on Scalable 3D Scene Generation and Geometric Scene Understanding"

As a lightweight and highly accurate method for nearest-neighbor search in 3D point clouds, approaches based on space-filling curves (SFC) have been proposed. However, due to the inherent properties of SFC, a gap arises between proximity relationships along the SFC and those in the original Euclidean space. In this study, we propose a loss function that reduces the influence of this gap. Specifically, we compute the distances between adjacent points along the SFC and train the model to optimize feature similarity between pairs of points that are distant from each other in the original 3D space. We incorporate the proposed method into a high-performing 3D point cloud segmentation model and evaluate its effectiveness on three datasets. The results demonstrate that the proposed method outperforms conventional methods on both indoor and outdoor point cloud datasets.

0.31

GHySSeg: Real-Time Geometric Ground and Road Segmentation for Hybrid Solid-State LiDAR

cs.RO cs.CV ·2026-11-16 ·Martín Palos, Fernando García
benchmark similarity 0.55
Abstract · 14 pages, 8 figures, 3 tables. Submitted to IEEE Transactions on Intelligent Transportation Systems. This work has been submitted to the IEE…

Hybrid solid-state LiDAR sensors are making their way into production vehicles, yet the data they produce differs structurally from that of the established spinning mechanical sensors behind today's autonomous-driving datasets: it is ring-free, dense, cluttered, and concentrated in a frontal field of view. The classical geometric methods that autonomous vehicles rely on for drivable space computation and navigation assume the ordered ring-and-column structure of a 360-degree spinning LiDAR and degrade or fail on this data, while learned alternatives are computationally heavy, hard to certify, and trained almost exclusively on spinning-LiDAR data. We demonstrate that the same dense, per-curve geometry is instead an opportunity to close the divide between the industry's preferred sensors and autonomous-driving research. We present GHySSeg, a purely geometric method that segments ground and drivable road from a single hybrid solid-state LiDAR frame by tracing each scan curve and reading two geometric signatures, a step in height and a fold-back in range, with no training and no graphics processing unit. To evaluate it, we release HySoLiD-Drive, the first public benchmark dedicated to ground and road segmentation on an automotive hybrid solid-state LiDAR, comprising 100 manually labeled and 7000 unlabeled frames recorded by two vehicles in real driving. On this benchmark, GHySSeg surpasses both geometric and learned state-of-the-art baselines across ground and road segmentation, reaching an intersection-over-union of 0.907 for road and 0.896 for ground at over 0.96 precision, while running in real time at about 22 milliseconds per frame on a single core.

0.42

Semantic-ITC: A Frame-wise Indoor Mobile Laser Scanning Dataset and Benchmark for Semantic Segmentation

cs.CV ·2026-09-16 ·Haiyang Wu, Muhammad Affan, George Vosselman, Ville Lehtola
benchmarkhot direction similarity 0.55
Abstract

Semantic labels for indoor mobile laser scanning (MLS) frames remain largely absent from current point cloud semantic segmentation benchmarks, which mainly focus on reconstructed indoor scenes or outdoor LiDAR perception. This paper introduces Semantic-ITC, to the best of our knowledge the first public dataset and benchmark for frame-wise indoor MLS semantic segmentation. The dataset contains 52 indoor sequences, 79,108 MLS frames, and 1.23 billion labeled points collected in classrooms, corridors, meeting rooms, offices, and study areas. Labels are attached directly to measured LiDAR points in each frame using 16 semantic classes covering structural elements, furniture, room equipment, vegetation, and other indoor objects. Semantic-ITC preserves the sparse, non-uniform, and frame-wise sampling pattern of indoor MLS, making it distinct from scene-level reconstructed point clouds and mesh-based indoor datasets. The annotations are produced by a hybrid workflow that combines predictions from a visual foundation model applied to synchronized RGB images, structural information from BIM, and manual refinement, with the final labels assigned to the original LiDAR frames. A single-frame benchmark is provided, and the best baseline reaches 79.27\% mIoU. Remaining errors are concentrated around object boundaries and ambiguous indoor classes, indicating the challenges of indoor MLS segmentation under sparse frame geometry and long-tailed class distributions. The dataset provides a public benchmark for evaluating semantic segmentation directly on measured indoor MLS frames and supports future studies on frame-wise indoor MLS semantic segmentation.

0.51