CS Paper Radar

Autonomous 3D Visual-Thermal Inspection for Utility-Scale Solar Farms

Lachlan Tychsen-Smith, Mark Cox, Brett Wood, David Haddon, Kenrick Anderson, Benjamin Duck, Jim O'Malley, Noel W Duffy, Peyman Moghadam

cs.AI cs.CVcs.RO ·submitted 2026-10-13 05:43 UTC · v1
published

Abstract

Utility-scale photovoltaic (PV) inspection is dominated by aerial surveys, which are effective for identifying module-level hot cells but provide limited visibility of critical components located under the array, including connectors, cabling, fasteners and structural elements. These assets are difficult to inspect consistently at scale, and their defects are often spatially small, partially occluded and difficult to localise from isolated images. We present an automated 3D visual-thermal inspection system (Tricorder) for under-panel PV asset inspection. The approach combines LiDAR-inertial Simultaneous Localization and Mapping (SLAM) with geometrically calibrated RGB and thermal imagery and machine-learning-based object detection and segmentation. Detected assets are associated with the reconstructed 3D environment, allowing visual and thermal observations from multiple viewpoints to be spatially fused and localised. We demonstrate the approach on utility-scale PV data for MC4 connector detection and connection-state recognition, thermal anomaly identification, and detection of structural components including bolts, nuts and torque tubes. The results demonstrate a pathway from image-based inspection toward spatially grounded autonomous inspection, where defects are detected and linked to specific assets and their 3D locations within the solar farm.

Comment
Accepted at the 2026 Asia-Pacific Solar Research Conference (APSRC 2026), Canberra, Australia, 1-3 December 2026

Closest papers

Nearest neighbours by meaning across the whole index.

A 10K drone image dataset with component-level annotations for rooftop photovoltaic inspection

cs.CV ·2026-11-10 ·Penglei Zhang, Wan Zhang, Ruizhe Deng, Bo Chen, Wenhao Duan +6 more
datasethot direction similarity 0.67
Abstract · 14 pages, 4 figures. Supplementary information is included as an ancillary file

Component-level information supports rooftop photovoltaic (PV) inspection, but recognizing individual components across complex scenes remains challenging. We present PVIS-10K, a dataset of 10,065 drone images with component-level annotations covering 63,632 physical PV modules across 22 rooftop installations. The high-resolution red-green-blue (RGB) images were acquired by unmanned aerial vehicles (UAVs, also known as drones) in Ningbo, Shaoxing and Shenzhen, China. Multi-angle oblique observations capture installation-height and scale variation, dense arrangements, occlusion, shadows and reflections. Three-dimensional delineation, reprojection and image-by-image review produced 3,516,675 image-level polygon annotations, stored in Common Objects in Context (COCO) format. Station-disjoint partitions support evaluation on unseen stations within and across cities. Four supervised models and text-prompted zero-shot Segment Anything Model 3 (SAM 3) provide full-resolution benchmarks of instance matching and foreground coverage. PVIS-10K supports component localization, delineation and image-based counting for drone-based rooftop PV inspection research.

0.23

Markerless Multi-Modal Autonomous Robotic Inspection of Large Space Structures

cs.RO ·2026-09-24 ·Juan De Dios Alfaro, Arturo Ríos, David Rodríguez-Martínez, Carlos Pérez-del-Pulgar
published similarity 0.62
Abstract · 7 pages, 5 figures, accepted conference paper

Future orbital infrastructures, such as deployable antennas, solar farms, and large orbital platforms will require autonomous inspection systems able to operate with limited prior knowledge and without cooperative markers. Current on-orbit servicing approaches often rely on predefined trajectories, standard interfaces, fiducial markers or accurate target models, which limits scalability for large, heterogeneous or partially unknown structures. This paper presents a markerless autonomous robotic inspection pipeline in which 3D reconstruction is used as an inspection-support representation. The system integrates a Kinova Gen2 manipulator with an end-effector-mounted multimodal sensor head composed of an RGB-D camera, a thermal camera and a 2D LiDAR. The pipeline estimates an approximate inspection volume, generates viewpoints, plans collision-free motions with MoveIt, and synchronously records RGB-D images, thermal data, and robot poses in ROS2. Candidate reconstruction methods were evaluated to select a practical method for this pipeline, with Nerfacto used for geometric reconstruction and Thermal-Nerfacto used to demonstrate thermal-aware rendering for inspection. Validation in a Gazebo-based simulator and preliminary laboratory tests reveal that the proposed system can autonomously acquire spatially coherent inspection data and produce reconstructions suitable for visual and geometric assessment, representing a step towards inspection of large non-cooperative space structures.

0.31

High-fidelity training-free photovoltaic module mapping from multi-view UAV imagery

cs.CV ·2026-11-03 ·WenHao Duan, Qi Chen, Penglei Zhang, Ruizhe Deng, Zhiling Guo +2 more
similarity 0.62
Abstract · 39 pages, 16 figures

High-fidelity photovoltaic (PV) module mapping requires complete instance recovery and accurate delineation. Vision foundation models offer zero-shot segmentation, but converting incomplete and inconsistent predictions across views into a complete, geometrically accurate map of individual modules remains challenging. We propose the Multi-View PV Module Mapper (MV-PVMapper), a training-free framework coupling vision foundation models with unmanned aerial vehicle (UAV) photogrammetry. First, Segment Anything Model 3 (SAM 3) generates candidates from original images using text prompts. Their contours are then transferred into object space through per-module slope correction to limit distortion from surface-model noise, and verified against representative module dimensions to guide cross-view instance selection. Finally, accepted instances return to all covering images as box prompts for SAM~3, supplementing text prompts with spatial cues for iterative segmentation, verification and fusion. On five-direction surveys of three operational rooftop PV plants at approximately 1 cm nadir ground sampling distance, two feedback iterations recover 7,710 of 7,711 reference modules with no false positives at an intersection-over-union (IoU) matching threshold of 0.5. Macro-averaged area precision and recall reach 99.00 % and 98.52 %, respectively. Averaged across sites, the aggregated Jaccard index reaches 97.55 %, compared with 60.73 % and 41.24 % for orthomosaic segmentation and multi-view pixel-voting baselines, respectively; average precision at the stricter IoU threshold of 0.95 reaches 95.67 %. Ablation studies show that module-size constraints are critical for instance separation, while slope correction and feedback to all covering views improve boundary accuracy. These results are achieved without task-specific image annotation or segmentation-model weight updates.

0.30

RAPA: Ray-Aware Physics Augmentation for Robust Camera-LiDAR Calibration

cs.CV ·2026-11-09 ·Kyung-Rin Oh, Ji-Hoon Kim, TaeJoon Ha, Jae-Sang Hyun
similarity 0.59
Abstract

Camera-LiDAR calibration is essential for reliable perception in robotic and autonomous systems. Most target-based calibration methods rely on checkerboard observations, but accurate checkerboard feature extraction from LiDAR point clouds remains challenging due to measurement sparsity. Existing approaches either require manual annotation of 3D corners or depend on geometric feature extraction methods, both of which can become unreliable when checkerboard features are insufficiently observed. In this paper, we formulate checkerboard localization as a 2D detection problem using cylindrical LiDAR reflectivity images. To overcome the limited availability of labeled training data, we propose ray-aware physics augmentation (RAPA), which generates diverse synthetic samples from a single checkerboard observation. The generated data are used to improve detector robustness and generalization under varying sensing conditions. Across four independently captured indoor and outdoor locations, the proposed synthetic augmentation exceeds the strongest evaluated image-space augmentation baseline by 16.1-43.1 percentage points in mAP@0.5. Compared with training-free target-based methods on 242 observations, RAPA yields the largest number of valid target localizations, with 96.4% of its returned detections yielding valid target poses. These reliable localizations support downstream camera-LiDAR calibration across all four evaluated locations. Overall, RAPA addresses a key bottleneck in target-based calibration by enabling automated LiDAR-side target localization with only a single annotated target observation.

0.21

Robust Reconstruction of Power Lines from Incomplete Mobile and Aerial LiDAR Data

cs.CV ·2026-11-03 ·Mohamed Gaha, Damos Ayobo Abongo, Philippe Massicotte, Eya Ben Kacem, Wael Jaafar +2 more
code/data similarity 0.58
Abstract · 15 pages, 9 figures

Accurate vegetation-encroachment assessment and risk mitigation require electric utilities to accurately locate and characterize distribution-network assets, including poles and power lines, and distinguish among medium-voltage, low-voltage, neutral, and telecommunication lines. Mobile and aerial Light Detection and Ranging (LiDAR) point clouds provide detailed 3D representations of these assets and their surroundings. However, power-line detection and reconstruction remain challenging because conductor returns are often sparse, incomplete, noisy, or occluded by vegetation. These challenges are especially significant in distribution networks, where lower pole heights and complex line configurations place conductors close to trees. In addition, mobile and aerial LiDAR datasets differ substantially in point density, viewing geometry, spatial coverage, and occlusion patterns. We propose a robust and automated reconstruction method combining scaled density-based clustering, robust polynomial fitting, and iterative fragment merging to recover individual conductors under severe data incompleteness and occlusion. Following semantic classification, the same reconstruction pipeline processes both mobile and aerial LiDAR data without modality-specific code or parameter tuning. The method is evaluated through degradation experiments, benchmarking, parameter sensitivity analysis, and large-scale validation. On the aerial dataset, it achieves 96.87% precision, 96.66% recall, a 96.76% F$_1$-score, and a geometric RMSE of 0.127 m. On the mobile dataset, where conductor-level reference annotations were unavailable, it achieves a point-to-model RMSE of 0.045 m and a reconstruction coverage of 95.27%. Source code, documentation, and evaluation data are publicly available at https://github.com/varen-project.

0.29

Region-Aware Multi-View Inspection Using Deep Learning and Domain-Informed Decision Fusion

cs.CV cs.LGeess.IV ·2026-10-21 ·Srivishnu Ethirajulu Krishnaraj, Rishikesh R. Chopade
similarity 0.57
Abstract · 10 pages, 4 figures, 10 tables

Automated optical inspection of precision components with tiny surface defects remains challenging when different regions of the same component exhibit different defect characteristics and, therefore, different acceptance criteria. This paper presents a region-aware, dual-model inspection framework that combines instance segmentation of localized seat-region defects with image-level classification of global shaft-region anomalies. Rather than treating these two model detections as sufficient evidence for component rejection, a deterministic decision fusion layer that formalizes industrial Standard Operating Procedures is applied to the model outputs to make the final component level decision. A PLC-synchronized imaging system acquires 18 seat and 18 shaft images over a full 360-degree rotation to provide multi-view circumferential coverage. The framework was evaluated on 380 automotive fuel injector needles, covering representative operational defect types, using identical model predictions in all configurations. Direct model-output aggregation via simple union logic (where any single-view detection flags a rejection) identified all 104 non-conforming components but produced a component level false rejection rate of 57.6%. Inclusion of a complete decision layer maintained the observed non-conforming (NOK) recall of 100% while reducing the false rejection rate to 10.9%, corresponding to an 81.1% reduction in false-positive component decisions. The results demonstrate that formalized manufacturing acceptance criteria can complement sensitive visual models by translating frame-level detections into practical and traceable component-level decisions.

0.27

Visual-SLAM for the detection of hidden tomatoes in greenhouses by Hierarchical Localization and GLOMAP for robotized harvesting

cs.RO ·2026-09-10 ·Fernando Cañadas-Aránega, José C. Moreno, José L. Blanco-Claraco, Francisco Rodríguez
similarity 0.56
Abstract

Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.

0.33

Spatio-Temporal Detection of Photovoltaic Systems on Industrial Building Rooftops Using Satellite Imagery and Machine Learning

cs.CV cs.LG ·2026-10-12 ·Frederick Bruch, Christian Knoth, Florian Detsch, Edzer Pebesma, Hanna Meyer
code/data similarity 0.56
Abstract

The global transition toward carbon-neutral energy systems is heavily dependent on the rapid deployment of solar photovoltaic (PV) infrastructure, yet the speed of this expansion has outpaced the ability of administrative registries to maintain accurate records. While high-resolution commercial imagery is often used for monitoring, its high cost and infrequent updates can create an information gap for grid operators, energy infrastructure developers and policymakers. This study addresses the lack of scalable monitoring for industrial-scale rooftop PV systems by developing a machine learning framework that utilizes open-access, multispectral Sentinel-2 satellite imagery. By integrating building geometries from OpenStreetMap with Sentinel-2 reflectance data, a Random Forest model was trained to identify the specific spectral signatures of PV modules. Moving beyond theoretical modeling, this work emphasizes practical implementation through the development of an interactive web-based prototype for on-demand site monitoring. The application enables users to retrieve up-to-date satellite observations and assess the presence of PV systems on industrial building rooftops. The tool incorporates quality metrics that inform users whether a prediction is supported by sufficient training data density or requires manual verification. This end-to-end framework demonstrates that open-source medium-resolution data can effectively bridge this monitoring gap.

0.37