CS Paper Radar

RAPA: Ray-Aware Physics Augmentation for Robust Camera-LiDAR Calibration

Kyung-Rin Oh, Ji-Hoon Kim, TaeJoon Ha, Jae-Sang Hyun

cs.CV ·submitted 2026-11-09 09:43 UTC · v1

Abstract

Camera-LiDAR calibration is essential for reliable perception in robotic and autonomous systems. Most target-based calibration methods rely on checkerboard observations, but accurate checkerboard feature extraction from LiDAR point clouds remains challenging due to measurement sparsity. Existing approaches either require manual annotation of 3D corners or depend on geometric feature extraction methods, both of which can become unreliable when checkerboard features are insufficiently observed. In this paper, we formulate checkerboard localization as a 2D detection problem using cylindrical LiDAR reflectivity images. To overcome the limited availability of labeled training data, we propose ray-aware physics augmentation (RAPA), which generates diverse synthetic samples from a single checkerboard observation. The generated data are used to improve detector robustness and generalization under varying sensing conditions. Across four independently captured indoor and outdoor locations, the proposed synthetic augmentation exceeds the strongest evaluated image-space augmentation baseline by 16.1-43.1 percentage points in mAP@0.5. Compared with training-free target-based methods on 242 observations, RAPA yields the largest number of valid target localizations, with 96.4% of its returned detections yielding valid target poses. These reliable localizations support downstream camera-LiDAR calibration across all four evaluated locations. Overall, RAPA addresses a key bottleneck in target-based calibration by enabling automated LiDAR-side target localization with only a single annotated target observation.

Closest papers

Nearest neighbours by meaning across the whole index.

Provisioning Robust and Efficient LiDAR Perception for Autonomous Driving

cs.CV ·2026-10-20 ·Tingxu Han, Zijie Shen, An Guo, Lyuke Wang, Chunrong Fang +2 more
code/data similarity 0.69
Abstract

LiDAR-based 3D object detection is a core perception service for autonomous driving, but deployment requires robustness to point-cloud corruption while meeting latency and memory requirements. Existing approaches address robustness and resource efficiency separately, resulting in compact detectors that are fragile under corruption or robust detectors that remain costly to deploy. We therefore formulate LiDAR perception provisioning as constructing a detector that remains accurate under point-cloud corruptions while meeting constraints on inference latency and peak GPU memory. To achieve robustness, we first craft corrupted samples that mimic extreme weather conditions. Then we train candidate detectors offline by ordering clean and corrupted samples by perturbation sensitivity, through which detectors learn more from hard corrupted samples. We estimate perturbation sensitivity using an ensemble of seven heterogeneous 3D detectors by tracking changes in confidence, BEV overlap, and unmatched detections. To improve efficiency, we narrow the network and use offline neighborhood-density measurements to determine how many points and neighbors each sampling stage processes. We evaluate our method using AP (Average Precision) under clean and corrupted conditions, inference latency, and peak allocated GPU memory. On KITTI for Car detection with PointRCNN, our method improves Moderate AP under corruption by 3.32 points over the original detector while reducing mean latency by 19.8% and peak allocated GPU memory by 53.9%. Across two datasets, two detector architectures, and three object classes, our method improves AP under corruption by 4.03 points on average over the corresponding original detectors, while reducing mean inference latency and peak allocated GPU memory by 14.4% and 38.0%, respectively. Our code is available at https://github.com/drunklibai/robust-efficient-lidar-perception.

0.20

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.69
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25

Generalizable Target-Less Joint Intrinsic-Extrinsic Camera-LiDAR Calibration using Deep Pixel-Point Correspondences

cs.RO ·2026-10-27 ·Simon Bultmann, Daniele Cattaneo, Abhinav Valada
similarity 0.69
Abstract · 8 pages, 5 figures

Accurate camera-LiDAR calibration is an essential prerequisite for robust multi-modal perception in robotics. Recent target-less methods based on learned pixel-point correspondences achieve high extrinsic calibration accuracy and generalize across environments. However, they operate on rectified images with known camera intrinsics, restricting their applicability to systems whose cameras have already been individually calibrated. We present a fully automatic, target-less framework that jointly estimates camera intrinsics, radial-tangential distortion, and camera-LiDAR extrinsics from raw images and LiDAR scans. Our method generalizes deep correspondence-based calibration from rectified images to raw cameras through intrinsic- and distortion-aware correspondence learning via synthetic augmentations. During calibration, we iteratively couple correspondence prediction and nonlinear optimization to jointly refine the camera parameters and relative sensor transformation. We evaluate our approach on an unseen camera-LiDAR configuration from the KITTI dataset and on three real robotic platforms in a zero-shot manner. The results demonstrate that joint calibration with our generalized pixel-point correspondence network improves extrinsic accuracy over correspondence-based methods using pre-calibrated cameras, while additionally recovering accurate intrinsics.

0.20

NIDAR: NIR-Guided Intrinsic Decomposition for Scalable Scene-Agnostic LiDAR Intensity Reconstruction

cs.RO ·2026-09-29 ·Junjie Zhang, Jie Yin, Kefei Qian, Jie Li, Mengpei Jia +3 more
published similarity 0.69
Abstract · 9 pages, 8 figures. Accepted by IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2026

LiDAR return intensity provides complementary surface-response cues for robotic perception and state estimation, yet many simulation pipelines omit it or reproduce it using reconstruction methods that require real intensity supervision and per-scene optimization. These requirements increase data-collection and fitting costs and limit reuse across simulated scenes. We present NIDAR, a feed-forward framework that synthesizes dense intensity-like observations from RGB appearance and simulator geometry. NIDAR combines pretrained pseudo-NIR translation, hierarchical intrinsic decomposition, geometry-aware modulation, and source-domain distribution calibration to transfer reflectance-related image cues to simulated point clouds. Its learned components are trained offline using Waymo data; their weights and calibration remain fixed during evaluation on Waymo and nuScenes. Deployment therefore requires neither target-scene intensity labels nor target-scene gradient-based fitting. The reported comparisons show competitive pixel-wise accuracy and favorable structural and perceptual fidelity against the evaluated reconstruction baselines. A controlled pseudo-NIR-versus-RGB diagnostic further shows that the pseudo-NIR prior is most beneficial when used through the paper-aligned reflectance-and-remapping route, rather than as a simple direct intensity regressor. We further integrate NIDAR with Unreal Engine 5, Isaac Sim, and a generative LiDAR pipeline. Two intensity-aware SLAM systems evaluated in two simulated indoor scenes suggest potential downstream utility, but do not constitute real-robot validation. NIDAR therefore offers a scalable intensity-synthesis interface for the evaluated settings; cross-wavelength, camera-configuration, embedded, and real-sensor validation remain future work.

0.29

Transformer-based Monte Carlo Localization in Construction Meshes

cs.RO ·2026-09-25 ·Linus Kramer, William Talbot, Olga Vysotska, Marco Hutter
similarity 0.68
Abstract

To be able to perform inspection or digitization tasks, mobile robots on construction sites must be able to localize themselves reliably with respect to a global reference frame that is shared with a building map. Similar room layouts and low-texture surfaces pose a challenge for existing LiDAR- and vision-based localization methods. We approach this problem with a LiDAR-based global relocalization system that estimates the robot's pose relative to a building mesh and combines a PointNet++ encoder with a place recognition decoder, whose outputs serve as a learned observation model within a Monte Carlo Localization (MCL) framework. The pipeline is trained exclusively on synthetic LiDAR scans obtained by simulating the robot's sensors inside the building mesh. Our approach is robust in ambiguous environments due to an uncertainty-aware decoder that scales positional likelihoods and a resampling strategy that injects model hypotheses into the particle set, enabling recovery from potential particle depletion. Evaluations on real-world datasets show that our method outperforms both diffusion-based and ScanContext++ baselines while maintaining fast inference (18 ms per call), demonstrating the practicality of synthetic-data training for mesh-referenced global localization in construction robotics.

0.18

Agreement Is Not Accuracy: LiDAR Elevation Errors Hidden in LiDAR-Camera Extrinsics

cs.CV ·2026-11-18 ·Yeon Kun Lee, Dongseok Yang, Deok-Kyeong Jang, Choongho Chung, Junyoung Lee +1 more
similarity 0.68
Abstract · 14 pages, 6 figures, including supplementary material

LiDAR and cameras provide complementary measurements for 3D vision, yet agreement between their observations does not establish the accuracy of either sensor's internal geometry. We show that systematic LiDAR elevation biases can be absorbed into the estimated extrinsics. Using synchronized LiDAR intensities and camera-estimated checkerboard poses, we jointly estimate a sensor-specific elevation correction shared across recordings and extrinsics for each recording. Ray-plane intersections locate the checker pattern without using reported ranges, preventing range errors from directly moving the lookup. Under matched intensity and correction models, this lookup gives smaller camera-consistency residuals than measured-point lookup. Across six identically designed rigs using the same sensor models, recording-excluded corrections reduce the mean translation-reference distance from 7.57 to 3.04 mm. On separate structures, they reduce inter-plane angle errors against references from independent dense camera scans and improve image-edge alignment. Rolling the rigs shifts the plane pairs exhibiting the largest angular improvements, as predicted for an elevation-only correction. Within the ray-plane model, calibration-target projections and loop-consistency residuals change little despite these geometric improvements. These findings show why agreement after extrinsic calibration need not establish correct internal LiDAR geometry. Synchronized observations of a familiar checkerboard provide a practical route to estimating and testing elevation corrections without a dedicated large calibration field. We plan to release code and data for reproducing the main results.

0.30

LightLoc++: Sensor-Robust Representation Learning for Efficient Outdoor LiDAR Localization

cs.CV ·2026-08-15 ·Wen Li, Shangshu Yu, Dunqiang Liu, Shaoyang Chen, Qiming Xia +4 more
datasetcode/data similarity 0.67
Abstract · v2: corrected author list (Shaoyang Chen was inadvertently omitted in v1)

Scene coordinate regression (SCR) achieves strong performance in outdoor LiDAR localization, but it usually requires scene-specific training that can take days, limiting practical deployment. Recent works improve training efficiency by decoupling SCR into a scene-agnostic backbone and scene-specific prediction heads, where the backbone is pretrained on source datasets and frozen for new scenes, and only lightweight heads are optimized. However, we find that this paradigm heavily depends on the pretrained backbone. Existing decoupled methods can match conventional SCR methods fully optimized for each new scene when LiDAR configurations are similar to those used during backbone pretraining, but their accuracy drops noticeably on datasets collected with different LiDAR sensors. This suggests that efficient LiDAR localization requires representations that capture stable scene geometry across LiDAR configurations. Motivated by this observation, we propose LightLoc++, a sensor-robust and efficient outdoor LiDAR localization framework. To support sensor-robust representation learning, we introduce SULID, a synchronized urban multi-LiDAR dataset with representative 32-, 64-, and 128-beam rotating LiDARs, extensive cross-sensor overlap, and diverse urban scenes. Using SULID, we pretrain a sensor-robust backbone through cross-sensor consistency learning. LightLoc++ further preserves efficient new-scene learning by incorporating sample classification guidance and redundant sample downsampling, which reduce regression ambiguity and computational redundancy in large-scale outdoor scenes. Extensive experiments on multiple outdoor LiDAR localization benchmarks demonstrate that LightLoc++ achieves state-of-the-art localization performance with the lowest new-scene training cost among compared methods. Code and dataset will be made available at https://github.com/liw95/LightLoc-PlusPlus.

0.24

Drones as Annotators: Amodal 3D Auto-Labeling for Ground LiDAR with Aerial Priors

eess.IV ·2026-09-06 ·Tianheng Zhu, Zhenhao Wang, Yiheng Feng
similarity 0.67
Abstract

Scaling perception data in autonomous driving is hindered by manual 3D bounding box annotation, a costly and labor intensive process requiring substantial domain expertise. Existing auto-labeling methods reduce this burden, but most of them rely on onboard sensors, where a single ground-level viewpoint yields occluded and sparse observations and inaccurate object geometry. We introduce DAA (Drones as Annotators), a drone-assisted training-free framework for amodal 3D auto-labeling. DAA augments ground LiDAR with an aerial agent that provides less occluded vehicle detections with continuous tracks. Ground LiDAR, in turn, provides precise metric 3D geometry unavailable from aerial imagery alone. DAA exploits the two complementary yet heterogeneous modalities through a two-stage framework: (i) air-ground coordinate alignment unifies aerial detections and ground LiDAR scans into a shared map frame and bootstraps coarse 3D bounding boxes from the aligned aerial detections; (ii) EM-like amodal box refinement alternates between identifying the vehicle's foreground points and updating the coarse box from the identified foreground and aerial priors. We evaluate DAA on an air-ground cooperative perception dataset, where it consistently outperforms existing auto-labeling baselines. LiDAR detectors trained on DAA-generated labels remain competitive with those trained on manual annotations at moderate IoU thresholds. Evaluation against a reference vehicle with known poses and dimensions further confirms its accuracy. We also demonstrate that DAA transfers, without parameter retuning, from onboard to stationary roadside LiDAR and to multi-agent fused point clouds. Code and dataset will be released upon publication.

0.18