CS Paper Radar

NIDAR: NIR-Guided Intrinsic Decomposition for Scalable Scene-Agnostic LiDAR Intensity Reconstruction

Junjie Zhang, Jie Yin, Kefei Qian, Jie Li, Mengpei Jia, Yajuan Dun, Wenbo Chu, Guofa Li

cs.RO ·submitted 2026-09-29 07:11 UTC · v1
published

Abstract

LiDAR return intensity provides complementary surface-response cues for robotic perception and state estimation, yet many simulation pipelines omit it or reproduce it using reconstruction methods that require real intensity supervision and per-scene optimization. These requirements increase data-collection and fitting costs and limit reuse across simulated scenes. We present NIDAR, a feed-forward framework that synthesizes dense intensity-like observations from RGB appearance and simulator geometry. NIDAR combines pretrained pseudo-NIR translation, hierarchical intrinsic decomposition, geometry-aware modulation, and source-domain distribution calibration to transfer reflectance-related image cues to simulated point clouds. Its learned components are trained offline using Waymo data; their weights and calibration remain fixed during evaluation on Waymo and nuScenes. Deployment therefore requires neither target-scene intensity labels nor target-scene gradient-based fitting. The reported comparisons show competitive pixel-wise accuracy and favorable structural and perceptual fidelity against the evaluated reconstruction baselines. A controlled pseudo-NIR-versus-RGB diagnostic further shows that the pseudo-NIR prior is most beneficial when used through the paper-aligned reflectance-and-remapping route, rather than as a simple direct intensity regressor. We further integrate NIDAR with Unreal Engine 5, Isaac Sim, and a generative LiDAR pipeline. Two intensity-aware SLAM systems evaluated in two simulated indoor scenes suggest potential downstream utility, but do not constitute real-robot validation. NIDAR therefore offers a scalable intensity-synthesis interface for the evaluated settings; cross-wavelength, camera-configuration, embedded, and real-sensor validation remain future work.

Comment
9 pages, 8 figures. Accepted by IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2026

Closest papers

Nearest neighbours by meaning across the whole index.

M3GD: Multi-Modal Multi-View Geometric Diffusion for Camera--LiDAR Novel View Synthesis

cs.RO cs.CV ·2026-09-24 ·Yang Zhou, Jiuhong Xiao, Shizhao Ye, Long Quang, Carlos Nieto-Granda +1 more
similarity 0.73
Abstract

Robotic novel view synthesis (NVS) must recover both visual appearance and metric 3D structure, yet most generative NVS methods rely only on images, overlooking LiDAR, a complementary sensor common on robotic platforms. We present M3GD, a Camera--LiDAR multimodal representation for generative NVS that composes independently pretrained 2D image and 3D point-cloud foundation models without separately pretraining a cross-modal translator. We show that, after camera projection, frozen LiDAR and image features exhibit substantial shared spatial structure, providing a natural cross-modal representation. M3GD conditions generation on LiDAR through this structure: it combines explicit geometry statistics with learned point-cloud descriptors into view-aligned packets on the image-latent grid, injected through a lightweight residual adapter into a multi-view flow-matching generator whose latent space, decoders, and training objective remain intact. On the GrandTour dataset, M3GD improves target-view RGB and depth synthesis over an image-only version of the same backbone. Ablations show that the gains come from pixel-aligned LiDAR content and that target-view LiDAR acts as a geometric query linking the requested view to source observations. Deployment on a ground robot demonstrates practical real-world operation, with a configurable quality--cost trade-off controlled by the number of Euler integration steps.

0.13

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

cs.CV ·2026-11-12 ·Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach
top venuecode/data similarity 0.72
Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

0.38

Generalizable Target-Less Joint Intrinsic-Extrinsic Camera-LiDAR Calibration using Deep Pixel-Point Correspondences

cs.RO ·2026-10-27 ·Simon Bultmann, Daniele Cattaneo, Abhinav Valada
similarity 0.72
Abstract · 8 pages, 5 figures

Accurate camera-LiDAR calibration is an essential prerequisite for robust multi-modal perception in robotics. Recent target-less methods based on learned pixel-point correspondences achieve high extrinsic calibration accuracy and generalize across environments. However, they operate on rectified images with known camera intrinsics, restricting their applicability to systems whose cameras have already been individually calibrated. We present a fully automatic, target-less framework that jointly estimates camera intrinsics, radial-tangential distortion, and camera-LiDAR extrinsics from raw images and LiDAR scans. Our method generalizes deep correspondence-based calibration from rectified images to raw cameras through intrinsic- and distortion-aware correspondence learning via synthetic augmentations. During calibration, we iteratively couple correspondence prediction and nonlinear optimization to jointly refine the camera parameters and relative sensor transformation. We evaluate our approach on an unseen camera-LiDAR configuration from the KITTI dataset and on three real robotic platforms in a zero-shot manner. The results demonstrate that joint calibration with our generalized pixel-point correspondence network improves extrinsic accuracy over correspondence-based methods using pre-calibrated cameras, while additionally recovering accurate intrinsics.

0.20

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.71
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25

RAPA: Ray-Aware Physics Augmentation for Robust Camera-LiDAR Calibration

cs.CV ·2026-11-09 ·Kyung-Rin Oh, Ji-Hoon Kim, TaeJoon Ha, Jae-Sang Hyun
similarity 0.69
Abstract

Camera-LiDAR calibration is essential for reliable perception in robotic and autonomous systems. Most target-based calibration methods rely on checkerboard observations, but accurate checkerboard feature extraction from LiDAR point clouds remains challenging due to measurement sparsity. Existing approaches either require manual annotation of 3D corners or depend on geometric feature extraction methods, both of which can become unreliable when checkerboard features are insufficiently observed. In this paper, we formulate checkerboard localization as a 2D detection problem using cylindrical LiDAR reflectivity images. To overcome the limited availability of labeled training data, we propose ray-aware physics augmentation (RAPA), which generates diverse synthetic samples from a single checkerboard observation. The generated data are used to improve detector robustness and generalization under varying sensing conditions. Across four independently captured indoor and outdoor locations, the proposed synthetic augmentation exceeds the strongest evaluated image-space augmentation baseline by 16.1-43.1 percentage points in mAP@0.5. Compared with training-free target-based methods on 242 observations, RAPA yields the largest number of valid target localizations, with 96.4% of its returned detections yielding valid target poses. These reliable localizations support downstream camera-LiDAR calibration across all four evaluated locations. Overall, RAPA addresses a key bottleneck in target-based calibration by enabling automated LiDAR-side target localization with only a single annotated target observation.

0.21

Cyclops: LiDAR as a Camera That Dreams in Color

cs.RO ·2026-08-17 ·Wei Gao, Jian Shu, Mingle Zhao, Maani Ghaffari, David Kong +2 more
code/data similarity 0.69
Abstract · 10th Conference on Robot Learning (CoRL 2026). Project: https://github.com/IMRL/Cyclops

Conventionally, robotic perception relies heavily on cameras due to the rich semantic texture they provide. However, their performance degrades significantly in low-light or high-dynamic-range environments. Conversely, while Light Detection and Ranging (LiDAR) captures illumination-invariant geometric and intensity properties, the resulting data are typically single-channel and sparse, creating a significant modality gap when applying vision models pre-trained on RGB datasets. In this paper, we propose Cyclops, a framework that translates sparse Non-Repetitive Scanning LiDAR (NRS-LiDAR) intensity into RGB video, enabling camera-free inference for all-day perception tasks. Our approach first converts sparse LiDAR intensity projections into dense representations via a frozen pre-trained densification module, serving as a geometrically rich source condition. The dense intensity latent is then transported toward the target RGB distribution through Latent Bridge Matching (LBM) with a learned velocity field in a few ODE integration steps. To mitigate inter-frame flickering, we inject prior-frame context via temporal attention layers and further formulate the velocity field as a policy optimized by a differentiable terminal reward that encourages terminal fidelity through backpropagation along the ODE trajectory. Extensive experiments demonstrate that the synthesized RGB, including those generated under near-dark conditions, enable standard RGB-based perception models to substantially outperform both LiDAR baselines and conventional cameras on semantic segmentation, lane detection, and point cloud colorization across diverse lighting conditions.

0.28

RAHF-Net: Range-Aware Heterogeneous Fusion for LiDAR-Assisted RGB Semantic Segmentation

cs.CV ·2026-10-18 ·R. D. Lin, Pengcheng Weng, Ge Wang, Han Ding, Fei Wang
similarity 0.68
Abstract

This paper studies LiDAR-assisted RGB semantic segmentation, where LiDAR point-cloud features improve dense pixel-wise predictions in the RGB image plane rather than 3D point labels or detections. Existing 2D fusion methods often project point clouds into shallow depth/range maps and apply spatially uniform fusion, discarding rich 3D structure and ignoring the range-dependent reliability of outdoor LiDAR. We propose RAHF-Net, a Range-Aware Heterogeneous Fusion Network. Its Cylindrical-to-Perspective (C2P) module projects pretrained cylindrical voxel features into the image plane, preserving structured 3D semantic priors. A Range-Aware Heterogeneous Fusion (RAHF) module then uses a soft depth-derived range mask to perform LiDAR-guided geometric enhancement in reliable near-field regions and visual-context enhancement in sparse far-field regions. On KITTI-360, RAHF-Net achieves 65.76 mIoU, outperforming representative RGB-only and RGB-LiDAR baselines, including CMX by 1.45 points. Experiments on DELIVER further demonstrate improved robustness under adverse weather, illumination degradation, and sensor corruption.

0.19

eSharp: Diffusion-based Sharp Monocular Metric Event-to-Depth Estimation

cs.CV eess.IV ·2026-11-05 ·Qiushi Dai, Aniket Dashpute, Yuhao Liu, Rishubh Parihar, Guha Balakrishnan +1 more
similarity 0.68
Abstract

Depth perception is fundamental for autonomous navigation, industrial inspection, and mixed-reality systems. It often operates under strict constraints on power and form factor. In such cases, monocular depth estimation (MDE) is often used. Even as recent advances continue to improve monocular depth quality, conventional frame-based MDE systems remain challenged by fast motion and high-dynamic-range scenes. This work introduces eSharp, an MDE framework that addresses these problems using an event camera. eSharp repurposes pretrained diffusion priors for event-only MDE and produces accurate metric depth with unparalleled sharpness on real data. Real-world event datasets provide only sparse LiDAR depth maps for ground-truth supervision, making dense prediction challenging. We address this limitation through cross-modal distillation, using LiDAR-calibrated dense pseudo-labels generated from a spatially co-registered frame camera to train eSharp. Experiments show that eSharp outperforms prior event-to-depth baselines in both metric-depth accuracy and spatial fidelity, establishing diffusion models as a promising foundation for event-driven 3D perception.

0.20