CS Paper Radar

Sensing While Communicating: Active Online Spectrum Cartography via Air-Ground Cooperation

Shangjie Zhuang, Jiahui Liang, Shijian Gao

eess.SP ·submitted 2026-09-21 05:16 UTC · v1

Abstract

Spectrum cartography is crucial for spectrum-aware resource management in low-altitude networks, where uncrewed aerial vehicles (UAVs) collect measurements to reconstruct power spectral density (PSD) radio maps. However, limited UAV energy budgets constrain both sampling density and onboard computation, while complex urban blockages hinder reliable measurement transmission to a remote station. To address these challenges, we propose an air-ground cooperative framework for active online spectrum cartography. Through adaptive bandwidth allocation, the UAV actively collects PSD measurements using uncertainty and simultaneously transmits them to a mobile uncrewed ground vehicle (UGV), while the UGV maintains a reliable air-ground link for map updates. Specifically, we first develop an online deep-unfolded tensor decomposition method to accelerate online map updates. We then derive a bit-depth-dependent interpolation-error model to guide the selection of quantization bit depths to balance overhead and accuracy. Finally, we use uncertainty information to coordinate the UAV and UGV for active sampling and link maintenance, respectively. Extensive experiments show that the proposed reconstruction method achieves a nearly 27-fold speedup over online tensor decomposition. In urban scenes, the proposed framework outperforms the representative baselines, reducing both normalized mean squared error (NMSE) and outage ratio by more than 23% each and increasing the packet-service completion ratio by over 4%.

Comment
13 pages, 11 figures, 6 tables, 2 algorithms; includes appendices

Closest papers

Nearest neighbours by meaning across the whole index.

Uncertainty-Guided UAV Spectrum Cartography with Deep-Unfolded Online Tensor Decomposition

eess.SP ·2026-09-30 ·Shangjie Zhuang, Jiahui Liang, Shijian Gao
similarity 0.85
Abstract

Spectrum cartography is crucial for spectrum-aware resource management in low-altitude networks, where uncrewed aerial vehicles (UAVs) collect spectrum measurements to reconstruct power spectral density (PSD) maps. However, limited energy and sensing bandwidth make measurements sparse in space and incomplete in frequency. To collect these measurements efficiently, the UAV actively plans its next move based on the latest map and its uncertainty, which requires rapid online reconstruction. We therefore propose an active online spectrum cartography framework. We first develop online deep-unfolded tensor decomposition (ODU-TD) for rapid map updates. An ensemble of reconstructors then estimates uncertainty to select informative sensing targets, and a learning-based policy determines the UAV movement and sensing bandwidth under the energy budget. Experiments show that ODU-TD achieves an approximately 27-fold speedup over online tensor decomposition and the lowest normalized mean square error (NMSE) among the compared reconstructors under sparse spatial and spectral observations, and the proposed framework reduces the NMSE by at least 55% compared with the representative baselines.

0.07

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.61
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

Mobility Information Capacity in the Sky: A Gaussian Channel Perspective

cs.IT eess.SY ·2026-09-09 ·Weijie Yuan, Fan Liu, Shuangyang Li, Lin Zhou, Pingzhi Fan
similarity 0.57
Abstract · 5 pages

Existing airspace capacity metrics mainly quantify occupancy or flow, although the same number of aerial vehicles may result in different motion alternatives. This letter establishes \emph{mobility information capacity} as an information-theoretic measure for low-altitude wireless networks. It quantifies the maximum information that trajectory observations reveal about intentional maneuver inputs under a given maneuver-resource budget and environmental uncertainty. For a common fixed feedback architecture, we formulate a lifted linear-Gaussian mobility channel and derive its finite-horizon log-determinant capacity. Cost and uncertainty whitening gives the spatiotemporal mobility eigenmodes, whose optimal maneuver-resource allocation follows water-filling. When the number of nondegenerate modes grows linearly with time and their efficiencies become asymptotically symmetric, we arrive at the Shannon-like law $R_M^{\rm G}=\frac{B_M}{2}\log_2(1+\mathrm{MNR})$, where MNR is the mobility-to-noise ratio. The proposed measure opens a motion-centric capacity perspective for the sky, while remaining a distinguishability baseline rather than a collision- or geometry-constrained airspace capacity.

0.46

When to Ask for Help: Uncertainty-Triggered Aerial Refinement for Off-Road Navigation

cs.RO eess.SY ·2026-11-04 ·Pranay Samineni, Adam Thorpe, John Chubick, Anand Balakrishnan, Christian Ellis +2 more
code/data similarity 0.57
Abstract · Project page: https://anonymous.4open.science/w/when-to-ask-for-help/

Heterogeneous air-ground teams can use aerial sensing to address the limited range and viewpoint of ground-vehicle sensors, but deciding when the UGV needs assistance and what information the UAV should collect remains a challenge. This paper presents a planner-conditioned air-ground assistance method that evaluates how uncertain map information affects the UGV's current MPPI rollouts. When navigation remains degraded, we score the same rollouts under resolved map hypotheses, select the map layer with the largest useful improvement, request the corresponding aerial measurement, fuse the returned information, and replan. Unlike approaches driven by fixed support roles, task structure, or uncertainty alone, our method conditions assistance on whether resolving uncertainty improves predicted ground navigation. Across 180 simulation trials on three off-road routes, the method achieves 98.9% goal attainment while reducing mean UAV flight time by 87.7% relative to continuous greedy aerial mapping. Aggregated across the routes, each second of estimated UAV flight time saves 2.94 s of UGV navigation time. Field experiments spanning approximately 2 km of UGV operation demonstrate uncertainty resolution and successful navigation recovery.

0.21

From Ideal Motion to Flight-Executable Communications: LLM-Evolved Multi-UAV Deployment for Cell-Free Massive MIMO

eess.SP ·2026-09-21 ·Yuyao Wang, Gaoze Mu, Yongan Zheng, Yanzhao Hou, Qingqing Wu +3 more
similarity 0.57
Abstract · 13 pages. 12 figures

Cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising paradigm for future wireless networks, providing user-centric services and cooperative coverage. By using unmanned aerial vehicles (UAVs) as aerial access points, CF-mMIMO networks can exploit UAV mobility to enhance three-dimensional (3D) coverage and spectral efficiency (SE). However, most existing studies on UAV deployment for communication optimization typically assume that UAVs follow ideal point-mass motion (IM), neglecting flight-control constraints and finite-horizon position errors in real flight execution. Consequently, IM-trained deployment policies may degrade severely or become difficult to execute in practice. Motivated by this, we model each UAV as a six-degree-of-freedom quadrotor rigid body with a cascaded flight controller to capture the impact of flight-control-constrained motion (FM) on communication optimization. Based on this model, we formulate a joint UAV 3D deployment and power allocation problem under FM to maximize the downlink average SE in CF-mMIMO networks. To address this problem, we propose LERE, a large language model (LLM)-enhanced multi-agent reinforcement learning (MARL) framework. In LERE, the LLM evolves hybrid rewards with both global and local components via multi-level feedback. The evolved hybrid rewards guide MARL policy optimization and promote multi-UAV cooperation. Experimental results demonstrate that LERE achieves higher SE than reward-design baselines while substantially reducing UAV position errors. Notably, when tested under FM execution, the FM-trained LERE policy achieves a 60.49\% SE gain over its IM-trained counterpart, confirming the necessity of incorporating flight-control constraints into UAV-enabled CF-mMIMO optimization.

0.18

Energy Efficient Multi-User Beamforming and 3D Position Optimization for SIM-Assisted UAVs

eess.SP ·2026-08-13 ·Chandan Kumar Sheemar, Giovanni Iacovelli, Sourabh Solanki, Wali Ullah Khan, George C. Alexandropoulos +1 more
benchmark similarity 0.57
Abstract

This paper studies energy-efficient downlink multi-user transmissions with unmanned aerial vehicle (UAV) communication systems equipped with stacked intelligent metasurfaces (SIM), enabling wave-domain analog beamforming through multiple cascaded metasurface layers, while low-dimensional digital precoding is carried out using a limited number of transmit radio-frequency chains. This architecture enables flexible electromagnetic wave manipulation with reduced hardware complexity, making it particularly suitable for energy-constrained aerial platforms. We formulate a hardware-aware energy-efficiency (EE) maximization problem aiming to jointly optimize the digital precoder, the phase shifts of all SIM layers, and the three-dimensional UAV position under transmit-power, SIM operation, and UAV deployment constraints. The resulting problem is highly non-convex due to the fractional objective, the cascaded SIM structure and the unit-modulus phase constraints of the constituent metasurface layers, as well as the non-linear UAV-dependent channel. To address these challenges, we develop a transform-based alternating optimization framework that combines Dinkelbach's method, dual and quadratic transforms, to enable closed-form digital beamforming, Riemannian manifold optimization for SIM phase shifts, and successive convex approximation (SCA) for UAV positioning. Convergence and complexity analyses are provided to characterize the proposed algorithm. The presented numerical results showcase that the proposed joint design significantly improves EE compared with fully digital and maximum ratio transmission benchmark schemes, while revealing important design trade-offs among transmit power, SIM size, and the number of its constituent stacked layers.

0.40

AI-Enabled Wireless Propagation Modeling and Radio Environment Maps for 5G Aerial Wireless Networks

eess.SP ·2026-09-22 ·Gautham Reddy, Kürşat Tekbıyık, Bryton Petersen, Antoine Lesage-Landry, Gunes Karabulut Kurt +1 more
published similarity 0.56
Abstract · Submitted for possible publication in IEEE JSTEAP

With the gaining prominence of aerial mobility applications, their success depends on the seamless integration of terrestrial and non-terrestrial network connectivity. However, providing reliable connectivity from terrestrial telecommunication networks remains challenging due to multi-cell interference from base stations (BSs) under line-of-sight (LoS) conditions to unmanned aerial vehicles (UAVs), coverage holes caused by antenna sidelobe degradation, localized multipath fading effects, and the high-speed dynamics of aerial users. To model such complexities, often exacerbated by sparse real-world data, this work proposes a dual-stage radio environment map (REM) framework. Our approach physically decouples the channel modeling, where a spatial Transformer first anchors the deterministic, large-scale path loss geometry, while a gated recurrent unit (GRU) subsequently extrapolates the stochastic, localized fast- fading deviations. By reformulating 3D spatial interpolation as a 1D radial sequence prediction task, the framework inherently aligns with the physics of propagation. We evaluate the proposed framework against state-of-the-art baselines, including 3D Kriging, UNet, Mamba, and Inception, using empirical 5G datasets. The results demonstrate improved intra-site generalization across diverse altitudes, user dynamics, and reference signal received power (RSRP) datasets, achieving signal-strength predictions with errors near 3 dB and REM spatial-similarity indices exceeding 0.75. Finally, we examine the influence of REMs and channel rank conditions on UAV channel quality, underscoring the necessity of reliable channel modeling for robust aerial connectivity.

0.33

Edge-Assisted Multi-View Localization for Low-Altitude Economy under GPS-Challenged Environments

cs.NI cs.RO ·2026-09-28 ·Zhengru Fang, Huanhuan Lou, Senkang Hu, Yihang Tao, Zongdian Li +3 more
code/data similarity 0.56
Abstract · The multi-view UAV dataset was collected by the authors and is released at https://huggingface.co/datasets/Peter341/Multi-View-UAV-Dataset. …

Unmanned aerial vehicles (UAVs) serving the low-altitude economy require reliable localization in urban canyons, indoor facilities, and other GPS-challenged environments. Visual matching with a geo-tagged database provides an alternative source for absolute positioning, but onboard computation and energy limits motivate offloading the database and matching pipeline to an edge server. The resulting localization quality depends on what visual information can reach the edge in time under varying wireless-communication and edge-computing resources. In this paper, we propose a network-adaptive edge-assisted multi-view localization framework that combines scalable orthogonality-regularized variational information bottleneck (O-VIB) encoding, value-of-information (VOI)-guided request control, and value-aware edge scheduling. We design an O-VIB model that supports nested latent prefixes from 8 to 128 dimensions and four UAV view modes. Each UAV requests edge assistance when the predicted localization-risk reduction exceeds the communication and service costs. On CARLA multi-view UAV data, VOI-guided control can lower the mean and 95th-percentile (p95) route errors by 24.8% and 31.0%, respectively, relative to budgeted periodic offloading under a matched per-route traffic budget. In indoor UAV experiments with motion-capture ground truth, our design can lower the mean position error by 28.0% relative to uncompressed all-view CLIP retrieval while cutting the descriptor traffic by 98.6%, using a 0.145 KB semantic representation. Under high congestion, a VOI-weighted scheduler with waiting-age and deadline shaping can lower the edge-side p95 latency of the top-10% high-value requests from 137.7 ms to 32.8 ms.

0.30