CS Paper Radar

Uncertainty-Guided UAV Spectrum Cartography with Deep-Unfolded Online Tensor Decomposition

Shangjie Zhuang, Jiahui Liang, Shijian Gao

eess.SP ·submitted 2026-09-30 17:47 UTC · v1

Abstract

Spectrum cartography is crucial for spectrum-aware resource management in low-altitude networks, where uncrewed aerial vehicles (UAVs) collect spectrum measurements to reconstruct power spectral density (PSD) maps. However, limited energy and sensing bandwidth make measurements sparse in space and incomplete in frequency. To collect these measurements efficiently, the UAV actively plans its next move based on the latest map and its uncertainty, which requires rapid online reconstruction. We therefore propose an active online spectrum cartography framework. We first develop online deep-unfolded tensor decomposition (ODU-TD) for rapid map updates. An ensemble of reconstructors then estimates uncertainty to select informative sensing targets, and a learning-based policy determines the UAV movement and sensing bandwidth under the energy budget. Experiments show that ODU-TD achieves an approximately 27-fold speedup over online tensor decomposition and the lowest normalized mean square error (NMSE) among the compared reconstructors under sparse spatial and spectral observations, and the proposed framework reduces the NMSE by at least 55% compared with the representative baselines.

Closest papers

Nearest neighbours by meaning across the whole index.

Sensing While Communicating: Active Online Spectrum Cartography via Air-Ground Cooperation

eess.SP ·2026-09-21 ·Shangjie Zhuang, Jiahui Liang, Shijian Gao
similarity 0.85
Abstract · 13 pages, 11 figures, 6 tables, 2 algorithms; includes appendices

Spectrum cartography is crucial for spectrum-aware resource management in low-altitude networks, where uncrewed aerial vehicles (UAVs) collect measurements to reconstruct power spectral density (PSD) radio maps. However, limited UAV energy budgets constrain both sampling density and onboard computation, while complex urban blockages hinder reliable measurement transmission to a remote station. To address these challenges, we propose an air-ground cooperative framework for active online spectrum cartography. Through adaptive bandwidth allocation, the UAV actively collects PSD measurements using uncertainty and simultaneously transmits them to a mobile uncrewed ground vehicle (UGV), while the UGV maintains a reliable air-ground link for map updates. Specifically, we first develop an online deep-unfolded tensor decomposition method to accelerate online map updates. We then derive a bit-depth-dependent interpolation-error model to guide the selection of quantization bit depths to balance overhead and accuracy. Finally, we use uncertainty information to coordinate the UAV and UGV for active sampling and link maintenance, respectively. Extensive experiments show that the proposed reconstruction method achieves a nearly 27-fold speedup over online tensor decomposition. In urban scenes, the proposed framework outperforms the representative baselines, reducing both normalized mean squared error (NMSE) and outage ratio by more than 23% each and increasing the packet-service completion ratio by over 4%.

0.40

Completing Radio Map Tensors via Factor Diffusion Posterior Sampling

eess.SP ·2026-10-11 ·Le Xu, Rajesh Shrestha, Xiao Fu
similarity 0.64
Abstract · 19 pages (14 pages of main text and 5 pages of appendix)

Radio map estimation (RME), also known as spectrum cartography, aims to recover radio signal strength across multiple domains (e.g., spatial and spectral domains) from sparse measurements, naturally leading to a tensor completion problem. Recent advances show that deep learning-based generative models can provide data-driven structural constraints for RME, yielding substantial performance improvements over traditional model-based approaches. Diffusion models (DMs) represent the current state of the art in generative modeling and hold strong promise for advancing RME. However, existing diffusion-based RME methods often require extensive training data, necessitate retraining when scenarios or measurement formats change, and lack recoverability guarantees. This paper proposes a latent factor diffusion framework for spatio-spectral radio map tensor completion. By training two independent DMs on single-emitter's spatial loss field and spectral signature and embedding them into the factors of the radio map tensor, the proposed approach enables diffusion posterior sampling-based recovery with reduced training complexity as well as enhanced measurement format/sensing pattern flexibility. Recoverability and sample complexity guarantees under the proposed approach are also established. Numerical experiments validate the effectiveness of the proposed method, showing strong generalization across city environments unseen in training data.

0.21

Sparse Array-Inspired Frame Structure Design for 5G NR ISAC

eess.SP ·2026-11-06 ·Haisu Wu, Hong Ren, Cunhua Pan, Yuqing Chen, Ruizhe Wang +3 more
similarity 0.58
Abstract · 16 pages, 7 figures, 2 tables

Integrated sensing and communication (ISAC) has emerged as a promising paradigm for future wireless networks. However, the extensive occupation of time-frequency resources for sensing limits the communication capacity. To address the resource conflict, this paper proposes a novel sparse sensing frame structure aligned with the 5G new radio (5G NR) resource grid at the slot and physical resource block (PRB) levels through a predefined sensing-pattern block. Specifically, inspired by the design of two-dimensional (2D) sparse antenna arrays, we map the sparse spatial geometries onto the time-frequency resource grid. By leveraging the hole-free property of the difference coarray, we eliminate the range-velocity ambiguity and cast the sensing signals into a reconstructed higher-order tensor representation. For efficient parameter estimation, we propose a novel binary-tree-based tensor train decomposition (BT-TTD) algorithm that extracts lower-dimensional tensor train cores (TT-cores) and executes a Vandermonde-prior-guided rectified alternating least squares (RecALS) algorithm. Simulation results validate that the proposed scheme achieves competitive estimation accuracy with reduced complexity. Furthermore, we investigate the topological properties of various sparse patterns, revealing the inherent trade-off among sensing accuracy, resource occupancy, and computational complexity.

0.19

Variational Bayesian Tensor Decomposition With Discrete Mixture Prior for Unsourced Random Access

eess.SP cs.IT ·2026-09-22 ·Ala Baccar, Alexis Decurninge, Alberto Rech, Sofiane Kharbech, Eric Pierre Simon +1 more
similarity 0.57
Abstract · Journal paper, 14 pages, 8 figures

Tensor-based modulation (TBM) schemes are a promising approach for unsourced random access (URA), where user separation relies on decomposing the received signal tensor via the canonical polyadic decomposition (CPD), typically computed with alternating least squares (ALS). Standard ALS, however, treats the factor matrices as unstructured and fails to exploit the discrete structure of the tensor sub-constellations. We propose DVB-ALS, a discrete variational Bayesian CPD framework with specific priors, tailored to a tensor structure with the corresponding encoding strategy, combined with iterative computation of an approximate posterior distribution. A discrete Gaussian mixture prior on one Grassmannian factor softly aligns the estimates toward the constellation points. The remaining factors are jointly modeled with a structured Gaussian prior whose posterior mean is constrained to the Khatri-Rao product manifold and posterior variance upper-bounded to prevent norm divergence during inference. The resulting closed-form coordinate ascent algorithm jointly estimates all latent factors and their uncertainties. We integrate DVB-ALS into DVB-TBM to design a complete URA receiver with single-user demapping, polar decoding with cyclic redundancy check (CRC) verification, and successive interference cancellation (SIC). Simulation results show significant gains over standard ALS-based decomposition and robust detection performance in URA settings, outperforming state-of-the-art schemes under high system loads.

0.27

Tensor Decomposition-Based Wireless Sensing for MIMO-OFDM ISAC via Flexible Spatial-Temporal-Spectral Optimization

eess.SP ·2026-08-16 ·Chengzhi Ye, Ruoyu Zhang, Lei Yao, Xinrong Guan, Yu Zhang +2 more
similarity 0.56
Abstract

Integrated sensing and communication (ISAC) is regarded as a key enabling technique in future 6th-generation (6G) mobile communication systems. However, existing multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC designs generally rely on the fixed-position antennas and fixed allocation of time-frequency resources, thereby limiting the degrees of freedom of wireless sensing along the spatial-temporal-spectral dimensions. In this paper, we propose a novel wireless sensing framework for MIMO-OFDM ISAC systems with flexible spatial-temporal-spectral optimization and propose a tensor decomposition-based approach to estimate target parameters, including azimuth/elevation angles, ranges, and velocities. Specifically, we first establish a monostatic wireless sensing model for MIMO-OFDM ISAC systems, where the positions of antenna elements, the allocation of OFDM symbols and subcarriers can be flexibly configured. Then, we formulate the problem of estimating target parameters as a tensor decomposition problem admitting to the canonical polyadic format, which enables the parallel target parameters estimation process from corresponding factor matrices along the spatial, temporal, and spectral dimensions, respectively. Based on the decomposed factor matrices, we derive the Cramer-Rao Bound (CRB) for the unknown target parameters and reveal that the estimation accuracy of azimuth/elevation angles, velocities and ranges is fundamentally determined by the array geometry, the distribution of OFDM symbols and subcarriers. Building on this insight, we obtain an optimized solution for the positions of antenna elements, and optimal solutions for the subcarrier allocation and OFDM symbol allocation to minimize the CRB, as well as the mean square error of target parameters estimation.

0.41

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.56
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

When Your State Estimator Has Lost The Plot: Detecting Estimator Failures Via Spectral Analysis

cs.RO ·2026-08-11 ·Christian Lanegger, Helen Oleynikova, Roland Siegwart, Michael Pantic
similarity 0.55
Abstract

Reliable onboard state estimation is essential for safe robotic operation, yet unmodeled disturbances, such as sensor aliasing or out-of-distribution noise, still cause estimators to degrade or fail completely. While many methods aim to improve estimator robustness, only a few provide introspective mechanisms to assess estimate quality. Existing uncertainty measures, such as covariances, rely on idealized assumptions and tend to be overconfident, and more recent data-driven approaches are typically tied to their training data distributions. We propose a sensor-agnostic introspective method that assesses estimator health by analyzing the frequency-domain power distribution of recent velocity estimates. The method is evaluated using outdoor flight data from an aerial robot running visual-inertial, LiDAR-inertial, and radar-inertial odometry. The dataset includes multiple estimator failures, enabling analysis of several frequency-domain indicators, such as signal power, spectral bandwidth, and entropy. We observe consistent spectral power differences between healthy and degraded estimates, allowing detection of 51%-58% of labeled failures with 60%-84% precision across three fundamentally different state estimation frameworks. Our results show that even a simple frequency-domain analysis of a state estimator's output can serve as a lightweight introspective tool to complement existing robustness techniques in real-world robotic deployments, and opens promising avenues for future investigation.

0.04

Empowering AI towards 6G: Realistic UAV Channel Data Acquisition using Open-Source Solutions

eess.SP ·2026-11-12 ·Qiuheng Zhou, Sergiy Melnyk, Hans D. Schotten, Robert Vilter, Nick Stuckert
publishedbenchmarkcode/datahot direction similarity 0.55
Abstract · 6 pages. Accepted version of a paper presented at the 2026 IEEE 103rd Vehicular Technology Conference (VTC2026-Spring), Nice, France

The "sim-to-real" gap introduced by hardware impairments motivates realistic experimental platforms for AI-native research in Non-Terrestrial Networks (NTN). This paper presents an open-source UAV-to-Ground measurement testbed built on the OpenAirInterface (OAI) stack and commodity Software Defined Radios (SDRs), enabling direct extraction of raw Sub-6 GHz Channel State Information (CSI) synchronized with flight telemetry. Through real-world flight campaigns, we observe a velocity-bandwidth decoupling effect: under unguided, measurement-only ridge extraction, dominant spectral ridges deviate strongly from the theoretical kinematic Doppler trajectory, whereas guided tracking substantially reduces this mismatch. This indicates that Doppler information is present, but not dominant, in the raw observable dynamics of commodity SDR-based measurements. We further benchmark representative deep learning predictors on this hardware-inclusive dataset and show, through a case study, that their behavior differs substantially from idealized expectations. By open-sourcing the testbed and dataset, we provide a realistic foundation for training and evaluating AI models for practical aerial network deployments.

0.69