CS Paper Radar

Empowering AI towards 6G: Realistic UAV Channel Data Acquisition using Open-Source Solutions

Qiuheng Zhou, Sergiy Melnyk, Hans D. Schotten, Robert Vilter, Nick Stuckert

eess.SP ·submitted 2026-11-12 11:18 UTC · v1
publishedbenchmarkcode/datahot direction

Abstract

The "sim-to-real" gap introduced by hardware impairments motivates realistic experimental platforms for AI-native research in Non-Terrestrial Networks (NTN). This paper presents an open-source UAV-to-Ground measurement testbed built on the OpenAirInterface (OAI) stack and commodity Software Defined Radios (SDRs), enabling direct extraction of raw Sub-6 GHz Channel State Information (CSI) synchronized with flight telemetry. Through real-world flight campaigns, we observe a velocity-bandwidth decoupling effect: under unguided, measurement-only ridge extraction, dominant spectral ridges deviate strongly from the theoretical kinematic Doppler trajectory, whereas guided tracking substantially reduces this mismatch. This indicates that Doppler information is present, but not dominant, in the raw observable dynamics of commodity SDR-based measurements. We further benchmark representative deep learning predictors on this hardware-inclusive dataset and show, through a case study, that their behavior differs substantially from idealized expectations. By open-sourcing the testbed and dataset, we provide a realistic foundation for training and evaluating AI models for practical aerial network deployments.

Comment
6 pages. Accepted version of a paper presented at the 2026 IEEE 103rd Vehicular Technology Conference (VTC2026-Spring), Nice, France

Closest papers

Nearest neighbours by meaning across the whole index.

Measurement-Calibrated Synthetic Pretraining for Rapid Adaptation of UAV Channel Predictors

eess.SP cs.LG ·2026-11-12 ·Qiuheng Zhou, Wei Jiang, Donglin Wang, Hans D. Schotten
published similarity 0.62
Abstract · 6 pages. Accepted version of a paper presented at the 2026 IEEE 104th Vehicular Technology Conference (VTC2026-Fall), Boston, MA, USA

Unmanned aerial vehicle (UAV) links can change faster than route-specific channel data can be collected, so a channel predictor must often be adapted from only a short target-flight calibration segment. This paper studies measurement-calibrated synthetic pretraining as an offline source prior for rapid adaptation of channel state information (CSI) predictors. The synthetic source is calibrated to flight-only power evolution, temporal shape variation, frequency selectivity, and phase disturbance, and is then combined with measured source-flight fine-tuning before target-flight adaptation. Under chronological held-out flight splits, synthetic-to-real (S2R) fine-tuning reduces the measured-data budget needed to reach useful prediction in the low-data regime. For 50 ms-ahead prediction, it crosses a latest-channel-estimate persistence baseline with 50 measured training windows, roughly 0.5 s of 10 ms-spaced supervised windows, whereas training from scratch requires 600 windows. A target-prefix adaptation study further shows that a lightweight gated recurrent unit predictor can reuse the pretrained source prior with one prediction-layer update epoch, positioning measurement-calibrated synthetic pretraining as a reusable prior for scarce target-flight measurements.

0.40

ANNA: Attention-Free Neural Neighborhood Aggregation for Channel Estimation on Regenerative NTN Payloads

eess.SP ·2026-11-15 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
benchmarkhot direction similarity 0.60
Abstract

Accurate deep learning (DL)-based channel estimation (CE) for non-terrestrial network (NTN) uplinks must meet the processing, power, and latency constraints of regenerative payloads. We propose Attention-free Neural Neighborhood Aggregation (ANNA), a lightweight architecture combining per-resource block (RB) pilot projection, convolutional neighborhood aggregation, and shared reconstruction, with dense-grid expansion only at the output. Evaluation against learned and classical estimators uses paired waveform-generated datasets with receiver frequency correction enabled and disabled. With correction enabled, 16-bit floating point (FP16) deployment on a 10 W Jetson Orin NX achieves 0.372 ms 99th-percentile (P99) latency and 2.15 dB lower mean normalized mean-squared error (NMSE) than the fastest learned baseline at 29.6% higher latency. Relative to the most accurate learned baseline, ANNA is 4.08 times as fast and consumes 80.5% less module energy per sample, with a 1.14 dB accuracy penalty. It meets the adopted 0.5 ms P99 target in all 100 benchmark runs, demonstrating a favorable accuracy-latency-energy trade-off for embedded uplink CE.

0.25

Confidence-Aware Speed-over-Ground Estimation from Doppler Spectra via Reconstruction-Based Representation Learning

eess.SP cs.LG ·2026-10-29 ·Malte Stelzer, Marvin Sach, Timo Bartels, Dinu Mihailescu-Stoica, Sören Kohnert +3 more
similarity 0.59
Abstract

Reliable speed-over-ground estimation from ground-facing Doppler spectra is essential for mobile platforms such as railway systems. Classical signal-processing approaches can provide accurate estimates under favorable conditions, but often degrade in challenging conditions. We propose confidence-aware speed-over-ground estimation trained on rail-domain data that estimates speed over ground and frame-level confidence from Doppler spectra with several novel contributions: First, we transfer the idea of exploiting a reconstruction task by an autoencoder for performance estimation from previous work to Doppler RaDAR. Second, we append a speed-over-ground estimation head operating on the autoencoder's latent space features. Third, we omit the reconstruction decoder during inference but add a low-cost dedicated confidence head for frame-wise error-bound estimation. Fourth, we reveal how noise augmentation training can provide high robustness to the method. Experiments show that our approach improves speed estimation accuracy over classical baselines while providing informative confidence estimates that indicate the reliability of individual predictions, even under adverse signal conditions.

0.27

Hardware-in-the-Loop Phase-Aware CNN for Real-Time 5G Channel Estimation

eess.SP cs.CVcs.ITcs.LG ·2026-08-11 ·Javad Zolfaghari-Bengar, Rakibul Rony, Elisa Gomez-de-Lope, Alejandro Villena-Rodriguez, Abhinav Mahadevan +1 more
published similarity 0.59
Abstract · This demo paper has been accepted at IEEE CSCN 2026

This demo presents real-time AI-based uplink channel-estimation inference using data collected from a hardware-in-the-loop 5G platform. The data-collection setup integrates commercial RF signal generation, programmable channel emulation, an O-RAN Radio Unit, DU emulation, and a lightweight phase-aware convolutional neural network (CNN) that estimates the channel response directly from received DMRS signals. Unlike simulation-only evaluations, the hardware-derived dataset exposes the estimator to practical RF and system-level impairments, including calibration mismatches, synchronization imperfections, quantization effects, phase noise, and implementation-specific nonlinearities. During the demo, attendees will observe real-time CNN inference and channel reconstruction using captured hardware-generated DMRS observations and compare the proposed CNN against Least Squares (LS) and frequency-domain LMMSE baselines. The objective is to showcase a practical AI-native physical-layer inference pipeline that combines hardware-derived 5G data with real-time neural channel estimation for future 5G-Advanced and 6G systems.

0.19

DeepTelecom: A Differentiable Multimodal Framework for Channel Twinning in Dynamic Heterogeneous Wireless Environments

cs.IT ·2026-10-10 ·Bohao Wang, Tianen Yuan, William Yen, Zehua Jiang, Chongwen Huang +10 more
similarity 0.59
Abstract

Large-scale multimodal data are a key enabler for integrating large generative artificial intelligence models into wireless networks. However, existing wireless datasets offer limited support for heterogeneous environments, particularly in terms of reusable high-fidelity scenes, scalable differentiable ray tracing, and synchronized multimodal data. These limitations are more pronounced in mobile and aerial scenarios with time-varying environments and channels. To address these limitations, we propose DeepTelecom, a material-aware, high-fidelity multimodal channel dataset and reproducible generation framework for networks involving unmanned aerial vehicles (UAVs) and reconfigurable intelligent surfaces. DeepTelecom refines coarse indoor/outdoor reconstructions and uses a large language model to map segmented surfaces to frequency-dependent electromagnetic parameters, yielding material-aware Level of Detail 3 digital twins. Then, a differentiable GPU-accelerated Sionna ray tracer simulates propagation across the sub-6 GHz/millimeter-wave/sub-terahertz bands, and specifically captures rotor-induced micro-Doppler signatures of stationary or moving UAVs at different pitch angles and translational velocities. The framework synchronously produces channel tensors, coverage maps, transmission videos, multi-view images, and weather-conditioned renderings, and supports differentiable material calibration from sparse channel anchors. The released dataset contains 10 material-aware indoor/outdoor scenes and 50,000 synchronized UAV samples; the framework supports scalable generation of additional data for user-defined scenes and system configurations. In 3D UAV localization, DeepTelecom reduces the 90th-percentile error from 31.05 m to 2.43 m compared with schemes considering only channel state information, demonstrating its significance for artificial-intelligence-enabled wireless systems.

0.23

XAI2CSI: Interpreting CSI with eXplainable AI for Human Activity Recognition

eess.SP ·2026-08-31 ·Idio Guarino, Alfredo Nascita, Domenico Ciuonzo, Damiano Carra, Antonio Pescapé
publishedhot direction similarity 0.58
Abstract · accepted at 22nd International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob 26)

Wi-Fi Channel State Information (CSI) has emerged as a key enabler for device-free Human Activity Recognition (HAR), enabling low-cost, unobtrusive sensing using existing communication infrastructure. However, Deep Learning (DL) models trained on CSI data often struggle to generalize across users, environments, and device setups due to the context sensitivity of wireless propagation. Despite this challenge, limited attention has been devoted to understanding model decisions and generalization failures. This paper introduces XAI2CSI, a framework that leverages eXplainable Artificial Intelligence (XAI) to analyze DL-based CSI sensing systems. XAI2CSI employs SAGE, a model-agnostic explainability method, to quantify temporal, spectral, and spatial CSI contributions to HAR decisions under nominal and cross-context evaluations on IEEE 802.11ax data. Our analysis reveals that the considered DL model exhibits limited robustness to unseen conditions due to an over-reliance on context-specific CSI patterns, causing models to misinterpret the underlying signal dynamics when deployment conditions change. The proposed methodology and findings provide a reference framework to explore alternative solutions and guide the development of robust, transparent Wi-Fi sensing systems.

0.38

A Universal Raw-IQ Radar Encoder for Cross-Sensor Human Sensing

cs.CV cs.LG ·2026-11-03 ·Jonas Leo Mueller, Dario Zanca, Sebastian Hoefler, Jan Petermann, Thomas Altstidl +3 more
publishedbenchmarkpositioncode/data similarity 0.58
Abstract · Accepted at the 2027 IEEE/CVF Winter Conference on Applications of Computer Vision (WACV)

Radar-based human sensing typically relies on end-to-end task-specific models trained on hand-chosen signal projections, which generalize poorly across unseen users, tasks, and hardware. We argue that the dominant signal processing choice, the micro-Doppler spectrogram, is a poor starting point for transfer because it keeps the Doppler axis, which carrier frequency rescales, and discards the angular axis, which carrier frequency leaves unchanged. We instead pretrain a convolutional beta-VAE without labels on clutter-removed raw radar measurements from four platforms spanning 60 and 77 GHz and 4 to 12 virtual antennas, aligned by a unified spectral interpolation grid. For every downstream benchmark the encoder stays frozen, and only a small supervised temporal classifier is trained on its embeddings. We compare against supervised models trained end to end on each benchmark and a pretrained radar foundation model across ten settings covering activity, gesture, sign-language, and gait recognition. When the test users and the radar are seen during training, our encoder is best on all five benchmarks. For users never seen in training, it leads on three of four benchmarks, by 4.8 to 23.2 points. On subject-disjoint gait recognition, it is best for each of the four held-out subjects and 8.3 points above the strongest baseline on average, even though its pretraining excluded every recording of this radar. Excluding the test radar from pretraining costs at most 5.3 points on any benchmark. Code is available at https://github.com/jonasmueler/UniversalRadarEncoder_WACV.

0.50

Achieving Robust Channel Estimation Neural Networks on Doppler effects by Designed Training Data

eess.SP cs.AI ·2026-11-10 ·Dianxin Luan, John Thompson
hot direction similarity 0.57
Abstract

Channel estimation is crucial in wireless communication systems. Many existing works train and test their models using the same or similar channel. However, practical channels are infinitely diverse and time-variant while data-driven algorithms often degrade on new and previously unseen channels. This prohibits the practical implementation of neural networks for channel estimation, particularly in high speed scenarios characterized by rapidly channel profile changes and very high Doppler shifts. Online training can fine-tune models to adapt to new channels, but requires high computation resource and incurs significant latency for physical-layer devices. Moreover, online training cannot exhaustively cover all possible channels because there are infinitely many possible channels. Therefore, we investigate the ability of neural networks to generalize to wireless channels. This paper proposes design criteria to generate synthetic training data, which guaranty that the resulting networks perform robustly across wireless channels, especially for very high Doppler shifts and different Doppler spectra. It ensures that offline-trained neural networks require no prior information or online training to precisely estimate the new channels. To demonstrate general applicability, we use neural networks with different levels of complexity to show that the generalization achieved appears to be independent of architecture. From simulation results, neural networks achieve a certain performance across wireless channels with different unseen power delay profiles (PDP) and Doppler shifts.

0.30