CS Paper Radar

ScaleMPA: Rethinking Scalable RRT* Acceleration With a Grid-Native Representation

Zilong Wang, Yuzhou Chen, Xinyue He, Chen Zhang, Guanghui He

cs.RO cs.AR ·submitted 2026-09-21 12:36 UTC · v1

Abstract

Real-time motion planning remains challenging in large and high-dimensional environments. Prior acceleration of RRT* follows tree-centric state organization, which reduces per-query cost but preserves superlinear end-to-end complexity and limits parallelism through structural dependencies. This paper presents ScaleMPA, a motion-planning accelerator that rethinks RRT* with a grid-native representation. By replacing hierarchical traversal with direct grid-based access, ScaleMPA reduces the planner critical path and exposes fine-grained parallelism. To make this reformulation practical under sparse high-dimensional planning, ScaleMPA further proposes a multi-resolution grid search engine and a hash-grid memory system. Implemented in 28 nm CMOS, ScaleMPA achieves millisecond-level planning latency and delivers 4.7$\times$--44.4$\times$ speedup over state-of-the-art motion-planning accelerators.

Closest papers

Nearest neighbours by meaning across the whole index.

Arborist: Algorithm-Hardware Co-Design for Fast and Efficient Motion Planning

cs.AR ·2026-09-11 ·Yaotian Liu, Lingyi Huang, Zishen Wan, Bo Yuan, Cheng Tan +2 more
top venue similarity 0.74
Abstract · Accepted to the 59th IEEE/ACM International Symposium on Microarchitecture (MICRO 2026)

Real-time motion planning must execute under strict latency and energy constraints on resource-limited platforms. This paper presents Arborist, an algorithm-hardware co-design framework that accelerates Fast Marching Tree (FMT*) motion planning through synergistic algorithmic and architectural innovations. At the algorithm level, Arborist introduces safe multi-tree expansion with global competition management and cross-tree optimality checking to expose inter-tree parallelism while preserving path quality. At the architecture level, our proposed ArboristAccel integrates an Arborist Toolbox that provides hardware support for inter-tree parallelism; a KD-tree Subsystem for high-throughput near-neighbor search; a Parallel-Query Retrieval module that balances multi-bank memory accesses to alleviate system-level memory bandwidth bottlenecks; and a Look-ahead Planning Engine that exploits intra-tree parallelism while preserving path quality by in-order commit. Synthesized in 16 nm and operating at 500 MHz, ArboristAccel sustains more than 1000x speedup over CPU across all workloads, peaking at 2800x on 2D-Maze, and delivers geomean improvements of 8.8x speedup, 4.6x area efficiency, and 3.1x power efficiency over an FMT* ASIC baseline. The corresponding factors relative to a state-of-the-art RRT*-based MOPED accelerator are 8.6x, 1.0x, and 1.8x, at comparable path cost. To the best of our knowledge, ArboristAccel is the first dedicated hardware accelerator for FMT*-based motion planning.

0.48

STAG: A Sparse Traversability-Aware Graph Representation from Grid-Based Costmaps for Robotic Navigation

cs.RO ·2026-10-08 ·Gabriel Manuel Garcia, Stéphanie Aravecchia, Miguel Angel Olivares-Mendez
benchmark similarity 0.66
Abstract

Autonomous rovers navigating large unstructured environments need efficient global planning that accounts for terrain traversability. However, searching dense grid-based costmaps becomes computationally expensive as the mapped area grows. We introduce STAG, a Sparse Traversability-Aware Graph that converts costmaps into compact graphs. STAG combines a medial-axis topological backbone, representative nodes for homogeneous traversability regions, and transition nodes near strong traversability gradients. Edges encode geometry and traversability to account for path length and terrain difficulty. We compare A* on STAG and dense grids using synthetic cave maps, mine maps and the DARPA CERBERUS dataset. Across five benchmark categories comprising 203 map instances and 101,200 queries, STAG reduces median planning time by 3.4x to 9.9x and peak query memory by 2.1x to 15.4x, with median relative path-length differences of -2.9% and +7.6%. STAG offers a compact representation for global planning, trading dense-grid traversability optimality for faster, less memory-intensive search.

0.15

MR. POP: Multi-Robot Parallel Optimizing Planner for Almost-Surely Asymptotically Optimal Planning

cs.RO ·2026-09-25 ·Chih H. Huang, Roy Xing, Brian Plancher, Zachary Kingston
similarity 0.66
Abstract

Finding globally optimal paths remains a fundamental challenge in multi-robot motion planning. Despite acceleration of almost-surely asymptotically optimal (a.s.a.o.) planners via CPU-based parallelism, achieving both probabilistic convergence guarantees and strong computational performance, these algorithms still struggle to scale to multi-robot settings. As such, we introduce MR. POP, a GPU-based a.s.a.o. multi-robot planner based on dRRT and the AO-x meta-algorithm. MR. POP uses large-scale GPU-based SIMT-parallelism to simultaneously run hundreds of roadmap construction and tree search iterations with underlying parallel nearest neighbor search and collision checking operations. We show that this enables MR. POP to become the only planner achieving a 100% solve rate while being faster than state-of-the-art a.s.a.o. planners in multi-robot systems up to 35-DOF. MR. POP also raises the success rate of downstream motion optimizers (e.g., from 4% to 72%), by creating high-quality, diverse seeds that help avoid local minima.

0.20

Contact-Rich Motion Planning via GPU-Parallel Mode Evaluation

cs.RO ·2026-09-18 ·Jiayun Li, Georgia Chalvatzaki
similarity 0.65
Abstract

Contact-rich motion planning (CRMP) is essential for robotic manipulation and locomotion, yet remains computationally challenging due to combinatorial contact decisions. Existing methods typically avoid broad evaluation of contact-mode sequences through search heuristics or optimization reformulations. We revisit broad evaluation in light of modern GPU hardware and introduce Contact-Mode Expansion with parallel Trajectory optimization (CoMET), which combines GPU-parallel trajectory evaluation with greedy contact-mode expansion. On planar pushing benchmarks, CoMET is competitive with optimization-based, sampling, and tree-search baselines in solution quality and planning time, matching the full-enumeration reference on nearly all instances with fewer evaluations and shorter planning times. Ablations suggest that much of the performance gain comes from the high-throughput trajectory evaluator. In bimanual nonprehensile manipulation, GPU-friendly local mode expansion achieves higher planning success than the tested adaptive tree search as the mode space grows. These results demonstrate that broad explicit mode evaluation provides a simple yet effective alternative for CRMP.

0.25

Low-Latency Mapless ESDF Queries for MAV Reactive Collision Avoidance

cs.RO ·2026-10-09 ·Leonard Freißmuth, Cedric Le Gentil, Helen Oleynikova, Stefan Leutenegger
top venue similarity 0.63
Abstract · 8 pages, 11 Figures

Reactive collision avoidance in unknown, cluttered environments must perceive obstacles and correct motion within milliseconds. Existing methods rely on maps for high-rate collision queries, but their acceleration structures require pre- processing. That cost is amortized in long-horizon planning, where a map serves millions of queries; reactive planning, however, is a near-field, short-horizon problem with potentially only hundreds of queries per measurement, where building a map may not pay off. We propose a mapless, Graphics Processing Unit (GPU)-accelerated Euclidean Signed Distance Field (ESDF) query with negligible pre-processing that operates directly on posed depth images, with resolution set by pooling the image rather than by a voxel size. On an embedded GPU it is simultaneously more accurate and lower in total latency than every voxel-grid configuration we measured between 2 cm and 20 cm, at one to two orders of magnitude less memory at matched resolution. With our query integrated into a Model Predictive Controller (MPC), simulated runs in laser-scanned forests at up to 9 m/s collide in 0.4 % through dense branches, against 5.9 % with the best voxel grid and 5.5 % with the best mapless baseline at our resolution, whose failures we attribute to voxel resolution and total latency respectively. We deploy the system onboard at two forest sites and fly at commanded speeds of up to 4 m/s.

0.50

PrismPlan: A Shared GPU Substrate for Motion Planning Across Paradigms

cs.RO ·2026-09-26 ·Hong Wu, ChaoXuan Liu, ShuJie Wang
code/data similarity 0.62
Abstract · 20 pages, 6 figures

GPU acceleration has made motion planning one to two orders of magnitude faster, but it has not made the three paradigms---sampling, search, and optimization---comparable to one another: every GPU-accelerated planner is built around a single paradigm, so comparing across libraries also compares their collision checkers. All three, however, bottleneck on the same GPU primitive: batched collision detection and the batched forward kinematics beneath it. PrismPlan builds that primitive once, as a shared substrate of per-sphere collision--kinematics device code that every planner consumes. Because they all execute the same device code, the backend is held fixed by construction and the paradigms can be compared head-to-head. We run six planners over 1800 MotionBenchMaker problems on three robots (7--14 DoF, one a dual-arm whole-body composite) at an equal 2s budget. On the 7-DoF Panda, sampling (pRRTC) is the most reliable paradigm at 98%, while parallel search (wPA*SE) follows within four points at a 3-4 times$ lower median latency, and the local optimizers trail well behind when made to solve from scratch. On the 14-DoF dual-arm composite, sampling still solves about 90% of feasible problems, while no search or optimization planner clears a third of them. Our open-source code is available at https://github.com/XiaoyubotMotionTeam/PrismPlan.

0.39

dRVG: Quadtree-Guided, Resolution-Complete Online Motion Planning for Polygonal Robots in Unknown Environments

cs.RO ·2026-09-25 ·Duo Zhang, Hechen Zhang, Junshan Huang, Jingjin Yu
similarity 0.62
Abstract

We present the dynamic rotation-stacked visibility graph (dRVG), an online motion planner that guides polygonal robots to specified goals in initially unknown, static environ- ments. It merges local roadmaps from successive observations to plan collision-free translations and rotations without a uniform position grid. A spatial quadtree schedules sensing goals across regions to reduce repeated visits while retaining all orientation configurations for routing. Under exact sensing and geometric computation and star-shaped robot and envelope assumptions, dRVG with center scans is resolution-complete relative to full- map RVG at the same angular resolution. In experiments using footprint scans, dRVG solves all 140 cases across 20 difficult maps and seven angular resolutions within a 20 s planning budget, with a median planning time of 1.18 s at 360 orientation layers. Six microMVP demonstrations illustrate the complete online planning loop on a physical robot.

0.16

TALU: A Reconfigurable Tiled-ALU Grid for RISC-V

cs.AR ·2026-10-13 ·Ali Emre Oztas, Can Erim Karsal, Mahir Demir, Mikel Luján
benchmark similarity 0.61
Abstract · Submitted to the 2027 IEEE International Symposium on Circuits and Systems (ISCAS)

Lane-based RISC-V vector processors exploit data parallelism well but pay a recurring cost for two common patterns: reductions, which require a separate tree pass, and deep dependent expression chains, which cannot be fused and are issued as serial vector instructions. We present TALU, a 5-stage RISC-V core whose execute stage is an NxN grid of registered ALU tiles instead of a single ALU. The grid is a reconfigurable, feed-forward spatial fabric: tiles route operands only from non-backward neighbours, and added diagonal forwarding lets a reduction collapse spatially. A minimal custom extension configures the per-tile operation, routing, and per-tile constants, and streams operands through the array. On a single fabric, TALU runs ordinary scalar code, single deep-path expressions, and multi-lane vector kernels. On the benchmark suite of the RISC-V2 vector processor, TALU is 1.8-5.5x faster than RISC-V2 and 4.5-15.5x faster than Vicuna at equal lane count, with a reduction cost (dot÷add) of 1.05x versus 1.96x and 1.26x for the vector cores. A retimed implementation places and routes at 1.03 GHz in 45 nm in 0.30 mm2, half the area of RISC-V2.

0.26