CS Paper Radar

SG-CPG: Severity-Gated Central Pattern Generators for Adaptive Quadruped Locomotion under Continuous Actuator Degradation

Adarsh Kumar Kosta, Kaushik Roy

cs.RO eess.SY ·submitted 2026-09-22 04:44 UTC · v1

Abstract

An animal with a weakened limb does not necessarily switch its gait, instead it unloads the affected limb, re-coordinates the remaining limbs, and scales its response with injury severity. This graded adaptation allows locomotion to persist despite partial loss of limb strength, rather than requiring a discrete transition between healthy and failed. Inspired by this behavior, we propose SG-CPG, a central pattern generator (CPG) for quadruped locomotion under continuous actuator degradation. SG-CPG preserves a frozen healthy CPG policy and introduces two severity-driven gates: a residual gate that re-coordinates all four legs and an amplitude gate that progressively shortens the weakened leg's stride as degradation increases. We emulate progressive degradation through two mechanisms: lowering the joint torque ceiling (ceiling mechanism) and scaling its low-level controller gains (gain mechanism), representing distinct forms of actuator weakening. Our simulations on a Unitree Go2 show that SG-CPG maintains a trot gait with 100% survival across an omnidirectional command schedule under 95% joint strength loss while tracking commands within 8%. Under a lowered torque ceiling, removing either severity path, the residual's severity observation or the amplitude gate, raises clipping at the weakened joint from 4.4% to 13.6% and 26.3% of steps at an 80% loss. On a real Go2, SG-CPG survives 28 of 29 forward and turning trials with up to 93% calf torque degradation. These results show that severity-gated adaptation can extend a healthy locomotion policy to progressive actuator degradation without treating the fault as a discrete failure.

Comment
8 pages, 5 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

A Trainable CPG Framework for Quadruped Locomotion

cs.RO ·2026-10-27 ·Xiyan Liu, Yide Liu, Guoyong Mao, Shaoxing Qu
similarity 0.71
Abstract

We present CPG-ENN, a trainable quadruped locomotion framework that combines explicit neural coordination with learned motion realization. A symmetry-based eight-neuron central pattern generator (CPG) supplies gait rhythms, while a pretrained, leg-shared execution neural network (ENN) maps rhythmic signals and trajectory parameters to joint-angle references without online inverse kinematics. A single feedback policy modulates six physically interpretable trajectory variables. The controller tracks planar velocity and yaw-rate commands across walk, trot, pace, bound, and pronk without gait-specific learned controllers or transitionspecific rewards. Simulation yields 99.39% transition success across all 20 directed gait pairs and all source-target speed combinations from {0.5, 1.0, 1.5, 2.0} m/s. Ablations show high cross-gait transition feasibility without transition exposure; exposure mainly refines gait acquisition and velocity transients. Comparisons with AllGaits and Walk These Ways demonstrate accurate gait-speed regulation, and Unitree Go2 experiments validate five gaits and their transitions.

0.21

OmniMimic: Dynamics-completed Motion Augmentation for Multi-style Omnidirectional Quadruped Locomotion

cs.RO cs.CVeess.IV ·2026-09-17 ·Sheng Wu, Guoqiang Zhao, Zhe Yang, Fei Teng, Zhikun Zhou +5 more
code/data similarity 0.67
Abstract · The project page is at https://OmniMimic.github.io

Animal demonstrations provide quadruped robots with natural and distinctive gait styles that are difficult to specify through hand-crafted rewards. However, their narrow directional coverage leaves little style-consistent supervision for backward, lateral, and turning commands. We present OmniMimic, a training framework that turns directionally limited animal demonstrations into a single multi-gait policy over target per-axis velocity ranges. OmniMimic first combines temporal reversal, constrained dynamics completion, and sagittal reflection to construct robot-specific kinematic and physical supervision beyond the observed directions. It then expands commands progressively from the demonstrated velocity distribution toward the target per-axis bounds, and uses a shared actor with soft-gated, gait-specialized residual experts to balance reusable locomotion skills with gait-specific corrections. Across four gaits in simulation, OmniMimic reduces mean foot-position RMSE at forward and backward reference velocities by 12.9% and velocity-tracking RMSE on a uniform Cartesian command grid by 63.1%, compared with the matched APEX baseline. The project page is at https://OmniMimic.github.io.

0.35

Learning Structured Locomotion References for Optimization-Based Whole-Body Control

cs.RO ·2026-10-17 ·Ömer Tarık Banuş, Uluç Saranlı, M. Mert Ankaralı
similarity 0.66
Abstract · 8 pages, 6 figures

Quadruped locomotion requires coordinating body motion,contact forces, foothold placement, and gait timing. We present a hierarchical controller in which reinforcement learning adapts these structured locomotion references while a gait scheduler, reactive footstep planner, and whole-body impulse controller retain responsibility for high-frequency execution. The model-based backbone can sustain a nominal trot independently, allowing the policy to focus on when and how to modify an already functional locomotion controller. We train the complete hierarchy in a vectorized controller-in-the-loop environment using a six-direction disturbance curriculum. Under a common simulator and evaluation protocol, the proposed controller achieves 77.29% mean survival across the tested disturbance grid, compared with 50.35% for the model-based reference controller. Training-time channel ablations identify adaptive foothold placement as the largest marginal contributor to grid survival and reveal direction-dependent effects of gait-rate adaptation. Together, these results demonstrate the viability of the proposed hierarchical controller architecture for integrating learned adaptation with optimization-based whole-body control through structured locomotion references.

0.11

Around the World: Unified Learned Locomotion on a 270 g Continuous-Rotation Quadruped

cs.RO ·2026-10-02 ·Arturo Flores Alvarez, Nathan Lintu, Dennis Hong
similarity 0.66
Abstract · 13 pages, including appendices. Project website: https://submissionreview.github.io/around-the-world/

Closed-loop learned locomotion is established on commercial quadrupeds but remains uncommon at the sub-kilogram scale. Continuous-rotation legs give MiNI-Q, a 270 g quadruped, access to supporting configurations on either side of the body. We exploit this range with a single posture-conditioned reinforcement-learning policy that runs entirely onboard. A continuous joint-space reference on the torus $T^8$ and its gravity-conditioned transformation connect upright walking, inverted walking, and landing recovery without state machines or phase switching. Coordinated posture and release curricula train this behavior family; identified actuation, cross-engine validation, and embedded execution support hardware transfer. The same sub-100k-parameter network tracks forward velocity with RMSE of 0.037 m/s upright and 0.050 m/s inverted, resumes walking in 24 of 30 release trials, and operates with four interchangeable foot geometries across four indoor surfaces. Hardware experiments and simulation ablations connect these capabilities to the representation, conditioning, and training choices that exploit the platform's motion range. Demonstration videos and supplementary material are available on the project website: https://submissionreview.github.io/around-the-world/.

0.33

Learning optimal gaits and styles for terrain-adaptive quadruped locomotion

cs.RO ·2026-11-19 ·Guillaume Bellegarda, Auke Ijspeert
code/data similarity 0.65
Abstract

Animals use many different gaits to locomote at different speeds across varying terrains. A longstanding question in biology and robotics is: which gait is best? This question is most often addressed from an energy-efficiency perspective on flat terrain, leaving open how the answer depends on terrain and on the criterion optimized. Here we show that gait optimality is determined jointly by terrain, performance metric, and velocity. We use deep reinforcement learning and networks of abstract oscillators, modeling spinal central pattern generators, to learn 11 quadrupedal gaits across diverse challenging terrains, together with the locomotion style (base height, foot ground clearance, foot offsets) that each requires. A second policy then selects among them to optimize a user-specified criterion such as cost of transport, base stability, or joint smoothness. Across these performance metrics and within this repertoire, every gait is optimal under at least one terrain-metric-velocity combination. The framework adapts zero-shot to gait couplings and styles never seen during training, to terrains far beyond the training distribution, and to larger quadrupeds five times the training mass. With a single additional pitch-tracking reward term, the same gait couplings also support bipedal-mode locomotion. Our method provides a general and systematic way to produce expressive locomotion and to select the gait best suited to a given terrain and criterion. Project page: https://guillaume10.github.io/terrain-gaits.

0.29

Humanoid Locomotion with a Fly-Inspired Recurrent Controller

cs.RO ·2026-09-22 ·Isabel Guan, Yuntian Zhao, Dingyuan Zhang, Shipeng Lyu
similarity 0.63
Abstract · 19 pages: 8 main text, 1 references, 10 supplementary material; 5 main and 10 supplementary figures. Simulation study

We investigate humanoid locomotion with a fly-inspired recurrent controller and identify the pathways supporting its deployed behavior. The controller couples 3,609 continuous neural states to a simulated Unitree G1 through body-observation projections, a motor-neuron-labelled readout, and joint servos. We formulate this neural-body feedback system and evaluate a fixed checkpoint across seven terrain instances, three speeds, and three initial yaw offsets. It completes 61/63 conditions under a survival-and-forward-progress criterion; a privileged reference completes 62/63. At nominal yaw, resetting the recurrent motor state before every policy call changes success from 19/21 to 0/21. Conversely, depth and upstream-state substitutions at 252 recorded states leave actions unchanged, with zero measured descending output throughout the intact rollouts. Recorded trajectories and state-matched images connect these findings to sustained movement, lateral drift, and termination events. The study characterizes an embodied recurrent control system whose tested locomotion is supported by direct body-and-command input and carried motor state, providing a concrete basis for subsequent comparisons of circuit structure and control resources.

0.26

Energy-Efficient Gait Adaptation via Hierarchical Reinforcement Learning for Quadrupedal Locomotion Across Diverse Terrains

cs.RO cs.LG ·2026-10-07 ·Ammar Issa, Anubhav Singh, Anton Tsaritsin, Sergey Kolyubin
similarity 0.62
Abstract · 9 pages. Submitted to IEEE ICRA 2027. Ammar Issa, Anubhav Singh, and Anton Tsaritsin contributed equally

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

0.27

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.61
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27