CS Paper Radar

Receiver-Side Physics-Informed Residual Digital Twin for Predictive Fine Tracking in Inter-Satellite Optical Links

Mahtab Dashtebozorgi, Meysam Ghanbari, Rula Ammuri, Mazen O. Hasna, Khalid A. Qaraqe

eess.SP ·submitted 2026-09-22 10:31 UTC · v1

Abstract

Fine tracking in inter-satellite optical links must compensate residual line-of-sight (LOS) motion despite sensor noise, vibration, model mismatch, and actuator latency. This paper develops a receiver-side physics-informed residual digital twin (PIR-Twin) that combines a nominal LOS transition, Gaussian optics, a nonlinear quadrant-photodetector observation, and extended Kalman filter synchronization. A normalized autoregressive ridge model learns the transition mismatch from independent calibration estimates, while the known delayed fine-steering-mirror correction remains separate from the physical LOS dynamics. The synchronized twin predicts the LOS at the command-actuation instant and enables proactive fine tracking. A controlled evaluation compares open-loop, reactive, nominal-predictive, and PIR-Twin operation using disjoint tuning, calibration, and test realizations. Under the nominal scenario, PIR-Twin reduces RMS pointing error by 14.1% relative to reactive tracking and also improves actuation-time prediction accuracy. Extended robustness tests show that the proposed method retains the lowest mean pointing error over a broad actuator-delay range and under increased time-varying LOS-motion amplitudes without residual-model retraining. The results demonstrate that correcting systematic short-horizon model mismatch, rather than relying on nominal extrapolation alone, is the key mechanism enabling effective predictive fine tracking.

Closest papers

Nearest neighbours by meaning across the whole index.

Integrated Optical Receiver for Communication and Fine Tracking in Inter-Satellite Links

eess.SP ·2026-09-22 ·Meysam Ghanbari, Mohammad Taghi Dabiri, Akram Alomainy, Qammer H. Abbasi, Mazen O. Hasna +1 more
benchmark similarity 0.58
Abstract

Inter-satellite optical links demand high-precision fine tracking while preserving sufficient received power for data communication, yet these functions are often treated separately at the receiver. This paper proposes a dual-function optical receiver that integrates data reception and fine tracking on a shared, intentionally defocused receiver plane. The architecture combines a central data lens with an annular four-segment tracking detector, creating a fundamental tradeoff between datapower collection and angular-estimation capability. A scalar Fresnel wave-optical model is developed together with nonlinear two-dimensional calibration and a noise-aware worstcase angular-accuracy framework. The receiver geometry is then jointly optimized to maximize the guaranteed fine-tracking range subject to a minimum data-power constraint. Results demonstrate that appropriate co-design of the central aperture and defocus substantially enlarges the usable fine-tracking region while maintaining the required communication-path power. The proposed framework provides a receiver-level benchmark for analyzing and designing integrated communication-and-tracking architectures in future optical inter-satellite terminals.

0.23

Residual Reinforcement Learning for Visual Servo Control with Zero-Shot Sim-to-Real Transfer

cs.RO eess.SY ·2026-11-14 ·Mahdi Nobar, Alisa Rupenyan, John Lygeros, Jürg Keller
similarity 0.56
Abstract · This manuscript is currently under review in IEEE Robotics and Automation Letters (RA-L)

We address tracking a moving object on a conveyor with a Franka Emika Panda robot arm, despite an imprecise digital twin, measurement errors, and noise. Our novel approach augments a loop-shaped inverse-Jacobian PI controller with a residual policy learned via Soft Actor-Critic in the digital twin. A delay-compensated Kalman filter fuses out-of-sequence camera measurements to provide latency-aware moving target position estimates. We compare the achieved performance to a performance bound for a class of model-based controllers derived from a frequency-domain sensitivity analysis, quantifying the minimum achievable error imposed by uncertain kinematic model mismatch. Simulation and hardware experiments indicate that our residual policy drives tracking error below the bound. Across conveyor speeds (27.9-41.8 mm/s), our method reduces mean tracking errors from 1.1-1.4 mm (baseline inverse-Jacobian PI) to 0.3-0.7 mm. These results show that learning residual corrections in a limited-fidelity simulator, combined with delay compensation, can substantially improve model-based control under modeling and measurement uncertainties while maintaining reliable sim-to-real transfer.

0.23

Reinforcement Twinning via Twin-Calibrated Bayesian Policy Search and Replay-Driven Identification

eess.SY ·2026-11-02 ·Miguel A. Mendez, Lorenzo Schena, Romain Poletti, Yannick Lecomte, Sebastiano Randino +1 more
similarity 0.53
Abstract

The feasibility of updating and synchronising digital twins of actuated systems from operational data depends strongly on how the system is controlled and, consequently, on the data generated during operation. This establishes a direct link between control actuation and model identifiability. This work presents a reinforcement-twinning framework that exploits this link through three computational components. A Gaussian-process surrogate of the physical return combines the twin prediction, used as a calibrated trend, with a discrepancy learned from measured returns, allowing Bayesian policy search to exploit the twin without being tied to its predictions. Candidate policies are proposed around the policy that is optimal for the twin, while measured returns can expand this region. The resulting physical episodes are replayed on the twin after observer-based synchronisation with sparse measurements, and its parameters are identified by combining Bayesian optimisation with gradient-based refinement. Selected information-oriented episodes deploy an excitation policy to improve parameter identifiability. The framework is demonstrated on a Burgers-flow analogue of dynamic-induction control in wind farms, with a deliberately misspecified model structure. Despite substantially biased return predictions, the twin provides a useful starting policy and search region, placing the guided search ahead of unguided Bayesian optimisation from its first physical evaluations. This advantage is maintained when the search region is allowed to expand in response to changes in measured returns, whereas searches over-constrained by the twin-defined region are eventually overtaken by the unguided alternatives. The results support reinforcement twinning as a framework for jointly adapting models and control policies when physical interaction is limited and model discrepancy cannot be neglected.

0.25

TwinLight: A Multi-Timescale Physical-Layer-Aware T-API-Compliant Optical Domain Controller Digital Twin

cs.SE physics.optics ·2026-11-06 ·Carlos Natalino, Piotr Lechowicz, Renato Ambrosone, Enrico Miotto, Vittorio Curri +1 more
publishedcode/data similarity 0.52
Abstract · Demonstration presented at ECOC 2026, Málaga, Spain, Sept. 2026. Paper ID Tu2-Ex1/1440. Code in https://github.com/carlosnatalino/TwinLight

We demonstrate TwinLight, an open-source optical-network digital twin acting as an optical domain controller. Its T-API REST and telemetry streaming interfaces expose a physical-layer engine that combines a GNPy steady-state baseline with four analytical transients.

0.50

The PUR-1 Cyber-Physical Digital Twin

cs.CE cs.LG ·2026-08-31 ·Vasileios Theos, Jonah Lau, Konstantinos Gkouliaras, Zachery Dahm, Konstantinos Vasili +5 more
similarity 0.52
Abstract

Digital twin technologies have the potential to improve operational flexibility and responsiveness capabilities of nuclear systems. To provide decision support, cyber event characterization, state estimation, predictive control, and real-time dynamic processing of operational data, however, an efficient digital twin needs to integrate multiple models (data-driven as well as physics-based) with explainability while at the same time maintain two-way synchronization with the physical facility at a time constant less than its operational cycle. In this work, we present the Purdue University Reactor One Digital Twin (PUR-1 DT), a cyber-physical digital twin with a complete high-fidelity physics-based and AI-driven virtual model stack (neutronics, thermal-hydraulics, point kinetics) which provides closed-loop explainable diagnostics, forecasting, predictive control, and action recommendation back to the reactor via two-way communications and a cyber-physical testbed. We demonstrate real-time synchronized state estimation and short-term forecasting over a full reactor operational cycle and conduct a series of benchmarking experiments to validate accuracy and latency. Our results show good agreement with experimental results and lay the groundwork for further development and experimental demonstration of DT-enabled functionalities in real-world facilities.

0.49

Optical Network Digital Twin: From Digital Coherent Transmission to Intelligent Network Operations

eess.SY ·2026-11-05 ·Hideki Nishizawa, Enrico Miotto, Andrea Rosso, Takahito Tanimura, Zehao Wang +18 more
survey similarity 0.51
Abstract

Optical Network Digital Twins (ONDTs) are emerging as a key framework for representing, synchronizing, and utilizing the physical state of optical networks for quality-of-transmission (QoT) estimation, optimization, and intelligent operation. This survey provides a comprehensive view of ONDTs, spanning digital coherent transmission and physical-layer observability to intelligent network operations. We systematically organize ONDT technologies from ecosystem, functional, control, and implementation architecture perspectives and review the enabling technologies required to construct, synchronize, and utilize digital representations of physical optical networks. As a unifying framework to describe both ONDT design and validation, we introduce a categorization based on the following figures of merit: Fidelity, Dynamicity, and Deployability (FDD). In particular, we emphasize fit-for-purpose Fidelity, where modeling effort focuses on the physical effects of components rather than solely maximizing model accuracy, favoring scalability and generalizability. Furthermore, experimental and field validations are examined to evaluate the practical applicability of ONDT technologies. We further examine experimental and field validations, from physics-based QoT estimation and measurement-informed model refinement to field synchronization, service provisioning, multi-domain observability, and infrastructure characterization. Finally, we discuss the complementary roles of ONDTs and AI agents toward autonomous optical networks and identify key research directions for practical deployment.

0.33

QoI-Aware Provisional Rollout and Retrospective Reconciliation for Reduced-State Scientific Twins

cs.CE ·2026-08-30 ·Liangji Zhu, Scott Klasky, Jaemoon Lee, Qian Gong, Anand Rangarajan +1 more
similarity 0.50
Abstract · 10 pages, 4 figures, 4 tables

Scientific twins may need to continue operating when updates from an authoritative primary system are temporarily unavailable. Once synchronization resumes, the new boundary can also be used to revise the intervening history. We distinguish an immediately available causal provisional trajectory from a delayed, future-conditioned reconciled trajectory. For reduced-state twins, we introduce a deterministic, calibration-based reconciliation method. A smooth temporal bridge carries the residual observed at the next synchronization block backward through the provisional interval. An analytic energy-matching stage then applies smooth regional gains and a global rescaling to match a component-energy trajectory estimated by cubic regression in log-energy space from synchronized frames on both sides of the gap. The method uses no additional correction network and revises decoded history without changing the latent state used for later rollouts. We evaluate 64 spatial patches from 16 JHTDB isotropic-turbulence slices for both velocity components and gaps S in {4, 6, 8}. During the longest gap, field error and gradient-sensitive QoI error degrade at markedly different rates, so field error alone does not characterize provisional fidelity. At S = 8, full reconciliation reduces window-averaged NRMSE by about 60% for both components and global gradient-intensity error from 4.21% to 2.91% for vx, whereas future-aware physical interpolation reaches 20.40% on the same metric. Energy matching additionally makes the reconciled history match its boundary-inferred global energy trajectory exactly. Future boundary information therefore substantially improves scientifically relevant properties within the evaluated regime.

0.28

IMU-Aided Motion Compensation of RSS Measurements for Dynamic Visible Light-Inertial Localization

eess.SP ·2026-10-16 ·Xiao Sun, Zhenqi Zheng, Jianzhu Huai, Xingxing Li, Wanwei Zhang +1 more
code/data similarity 0.50
Abstract

Visible Light Positioning (VLP) offers high-precision indoor positioning using existing LED infrastructure. However, in VLP systems using Photodiodes (PDs) as receivers, rapid movement of the PD causes measurement inaccuracies as the Discrete Fourier Transform (DFT) processing yields averaged rather than instantaneous Received Signal Strength (RSS) values. To address this challenge, we propose an RSS correction algorithm that integrates Inertial Measurement Unit (IMU) data with VLP observations to compensate for motion-induced distortions. Our approach leverages IMU-derived motion parameters to model the temporal variation of optical signals during the DFT window, enabling instantaneous RSS estimation. The algorithm is embedded within both tightly and simply coupled VLP/INS integration frameworks that estimate the pose of the moving receiver. This work targets highly dynamic indoor navigation. Simulations validate the correction model, and total-station-tracked experiments confirm reduced RSS discrepancies against model references. Across eight held-out high-dynamic handheld trials with peak translational and angular speeds of 2.25 m/s and 284 deg/s, correction reduces the pooled 3D position and PD-normal inclination root mean square errors relative to the LiDAR/IMU reference with a shared IMU by 56.0% and 71.9%, respectively. Both datasets and source code are publicly available.

0.31