CS Paper Radar

IMU-Aided Motion Compensation of RSS Measurements for Dynamic Visible Light-Inertial Localization

Xiao Sun, Zhenqi Zheng, Jianzhu Huai, Xingxing Li, Wanwei Zhang, Yuan Zhuang

eess.SP ·submitted 2026-10-16 09:24 UTC · v1
code/data

Abstract

Visible Light Positioning (VLP) offers high-precision indoor positioning using existing LED infrastructure. However, in VLP systems using Photodiodes (PDs) as receivers, rapid movement of the PD causes measurement inaccuracies as the Discrete Fourier Transform (DFT) processing yields averaged rather than instantaneous Received Signal Strength (RSS) values. To address this challenge, we propose an RSS correction algorithm that integrates Inertial Measurement Unit (IMU) data with VLP observations to compensate for motion-induced distortions. Our approach leverages IMU-derived motion parameters to model the temporal variation of optical signals during the DFT window, enabling instantaneous RSS estimation. The algorithm is embedded within both tightly and simply coupled VLP/INS integration frameworks that estimate the pose of the moving receiver. This work targets highly dynamic indoor navigation. Simulations validate the correction model, and total-station-tracked experiments confirm reduced RSS discrepancies against model references. Across eight held-out high-dynamic handheld trials with peak translational and angular speeds of 2.25 m/s and 284 deg/s, correction reduces the pooled 3D position and PD-normal inclination root mean square errors relative to the LiDAR/IMU reference with a shared IMU by 56.0% and 71.9%, respectively. Both datasets and source code are publicly available.

Closest papers

Nearest neighbours by meaning across the whole index.

Joint RF-VLP Position and Velocity Tracking: Bayesian Estimation and Performance Analysis

eess.SP ·2026-11-14 ·Chaedam Son, Si-Hyeon Lee
theory similarity 0.62
Abstract · 13 page, 8 figures, this work has been submitted to the IEEE for possible publication

Visible light positioning (VLP) provides accurate indoor positioning through optical received signal strength (RSS) measurements, while radio-frequency (RF) delay and Doppler measurements offer complementary range and velocity information. Motivated by this complementarity, we investigate joint RF--VLP position and velocity tracking, addressing both recursive state estimation and its fundamental performance characteristics. We formulate a Bayesian maximum a posteriori (MAP) estimation problem that combines optical RSS, RF delay and Doppler measurements, and motion prediction, and develop a Gauss--Newton-based algorithm for recursive tracking. To characterize the estimation limits and the benefits of RF--VLP integration, we derive the Bayesian information matrix and the corresponding Bayesian Cramér--Rao lower bound (BCRLB). We further introduce a state-conditioned information matrix (SCIM), whose inverse coincides with the MAP estimator's mean-squared error matrix under a first-order observation model, enabling tractable analysis of RF-induced information gains. The analysis quantifies the distinct contributions of RF delay and Doppler measurements and reveals different asymptotic estimation-error behaviors with respect to RF and VLP signal-to-noise ratios. Numerical results demonstrate improved position and velocity tracking over the considered baselines, with substantial velocity gains from RF sensing. The results also validate the theoretical asymptotic predictions and show that the inverse of the SCIM closely captures the estimator's error trends.

0.32

Real-Time Event-Based LED Tracking and Pose Estimation with PWM-Encoded Markers

cs.RO ·2026-11-05 ·Junkai Niu, Sheng Zhong, Delei Kong, Xin Wang, Kaizhen Sun +3 more
similarity 0.60
Abstract · This work has been submitted to the IEEE for possible publication

Event cameras are neuromorphic vision sensors with pixels that independently and asynchronously respond to brightness changes at microsecond resolution, supporting state estimation under rapid motion, motion blur, and high dynamic range (HDR) illumination. This also enables capture of high-frequency blinking patterns from light-emitting diodes (LEDs). Based on this, we propose a real-time event-based framework for LED tracking and six-degree-of-freedom (6-DoF) relative pose estimation using pulse-width modulation (PWM)-encoded LED markers. Multiple LEDs share a common blinking frequency and encode identities through distinct PWM duty cycles, reducing frequency-resource requirements and computational cost. Our dual-rate asynchronous tracking framework combines low-rate LED detection with high-rate raw-event updates, maintaining robust LED identity association and accurate pixel-level tracking under rapid motion. LED identities and positions establish reliable 2D-3D correspondences for real-time metric 6-DoF relative pose estimation. Extensive evaluations on a self-collected dataset demonstrate robustness under large motion flow and transient image-plane LED overlap. Furthermore, we develop a coordinated robotic platform comprising a quadrotor and a Mecanum-wheeled mobile robot, demonstrating the proposed framework's potential for closed-loop drone guidance through hovering and target-following experiments under time-varying HDR illumination, with onboard deployment on an NVIDIA Jetson Orin NX. The dataset and implementation will be released to facilitate further research.

0.36

TinyCVIO: A Constellation-Aided Visual-Inertial Odometry System for Nanodrones

cs.RO ·2026-09-24 ·Derin Ozturk, Kaan Akan, Irwin Wang, Christopher Batten
similarity 0.58
Abstract · 9 pages, 6 figures, 4 tables. Video: https://youtu.be/6hQNdIcjHJE

Nanodrones require accurate, real-time state estimation under severe sensing and computational constraints. We present TinyCVIO, a visual-inertial odometry system that co-designs miniature sensing, visual processing, and estimation for a commodity dual-core microcontroller with 520 kB SRAM. Lightweight LED constellations provide known geometry without surveyed positions or yaw angles, assuming placement on a common level plane. A streaming visual frontend tracks LED observations from a millimeter-scale camera at 29.2 FPS, while a rigid-board measurement model retains inter-LED constraints and streaming QR bounds estimation workspace for a fixed filter-state size. Across 19 hand-held hardware-in-the-loop datasets, the rigid-board model reduces mean absolute trajectory error by 27% relative to planar points. The complete system runs onboard a Crazyflie across nine flights at three speeds, achieving 3.5-3.7 cm mean absolute trajectory error and 0.50-0.60% relative pose error over 10 m segments, with mean estimate latency of 15.7-16.3 ms.

0.23

MVP-SLAM: Multi-Camera Visual-Inertial Floorplan-Prior SLAM

cs.RO ·2026-09-30 ·Asier Bikandi-Noya, Miguel Fernandez-Cortizas, Muhammad Shaheer, Holger Voos, Jose Luis Sanchez-Lopez
similarity 0.57
Abstract · 9 pages, 4 figures. Submitted to IEEE Robotics and Automation Letters (RA-L)

Indoor building construction sites are demanding environments for visual SLAM, where variable lighting and repetitive, low-textured structures make the system drift over long trajectories, though structural elements such as walls remain distinguishable despite these conditions. These buildings are constructed according to their as-planned floor plans, available from the design phase, and although the actual as-built site can differ from this design, floor plans still provide a metric reference, both to localize the system in the building and to correct drift. Existing methods often use the floor plan to correct an already-built trajectory offline, and those that instead correct it online typically rely on depth sensors. We instead present MVP-SLAM, an online visual-inertial SLAM on two opposite-facing fisheye cameras that corrects drift from cameras alone by matching walls detected in its map to the floor plan, through a drift-aware policy. A multi-stage integration then turns each matched pair incrementally into a persistent correction, so the trajectory stays corrected and localized within the floor plan as it is built. MVP-SLAM was validated on the multi-floor construction sites of the Hilti-Trimble SLAM Challenge 2026, ranking 2nd of 22 teams in the Localization task (0.29 m mean RMSE) and 5th of 62 teams in the SLAM task (0.24 m), the top-ranked one in both tasks among those that operate online, integrate the floor plan, and localize within it.

0.16

A Height-Constrained 2-Point Minimal Solver for Pose Estimation from Active LED Markers with Event Cameras

cs.CV cs.RO ·2026-08-10 ·Runze Yuan, Alexander Kappler, Jun Zhang, Kuangyi Chen, Fabio Morbidi +3 more
published similarity 0.56
Abstract · 8 pages, 6 figures, accepted by IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS (IROS) 2026

In many autonomous applications requiring real-time localization, active marker-based systems are preferred due to their low latency and ease of deployment compared to computationally demanding feature-based methods. Event~\mbox{cameras} offer high temporal resolution and minimal delay and are commonly used with active LED markers for robust real-time localization. Existing methods typically rely on Perspective-n-Point (PnP) solvers for pose estimation. However, structured marker layouts can be challenging to deploy in space-constrained scenarios, while partial self-motion information (e.g., gravity direction and altitude) is readily available from onboard sensors. We derive a robust and accurate minimal solver that estimates camera pose from only two LED markers by incorporating known tilt angle and camera height measured by an onboard sensor, such as an IMU or an altimeter. The proposed formulation uniquely determines the camera pose through both a closed-form and a linear least-squares solution. We further analyze degenerate configurations and characterize the conditions under which height information does not contribute to rotation estimation. For evaluation, we developed an event-based active marker system to collect real-world data with ground truth from a motion capture system. Experiments on both synthetic and real data demonstrate improved accuracy over the state-of-the-art P2P solver and competitive performance relative to P3P.

0.33

Quanta Perception as Probabilistic Events

cs.CV cs.AI ·2026-08-27 ·Varun Sundar, Pavan Thodima, Sacha Jungerman, Mohit Gupta
similarity 0.55
Abstract · For project webpage, see https://wisionlab.com/project/probabilistic-events/

Autonomous systems rely on extracting information from light, yet remain brittle in extreme environments, from nighttime navigation to high-speed robotics. Conventional sensors aggregate photons over fixed exposures, imposing trade-offs between sensitivity, dynamic range, and temporal resolution that degrade perception when photons are scarce or dynamics are rapid. Quanta sensors detect individual photons, but their streams exceed real-time compute and latency budgets by orders of magnitude. Here we introduce $\textit{probabilistic events}$, a computational primitive for real-time quanta perception from individual photon detections. By computing the posterior over the time since the last intensity change, we represent photon streams as recursive belief states. Rather than fixed-threshold event-camera triggers, this recursive Bayesian formulation yields three low-latency signals: motion-adaptive scene flux, high-fidelity activity maps, and entropy-based perceptual uncertainty. This representation enables perception in extreme conditions, including pose estimation of a running person at $\sim$0.05 lux---without retraining vision models. Our approach processes input streams exceeding 50{,}000 quanta frames per second on commodity GPU hardware---yielding kilohertz-scale outputs up to four orders of magnitude faster than state-of-the-art quanta reconstruction baselines, even for megapixel arrays. By replacing frame reconstruction with direct probabilistic inference over photon streams, this work bridges photon-counting quanta sensing with robotic vision.

0.32

Measurement-Adaptive Light-Cone Transform for Robust Non-Line-of-Sight Imaging

eess.IV cs.CV ·2026-10-16 ·Lianfang Wang, Xueying Liu, Junnan Dong, Qinghua Zhang, Jun Liu +2 more
published similarity 0.55
Abstract

Practical non-line-of-sight (NLOS) measurements are affected by noise and deviations from idealized light transport, which can degrade reconstruction with conventional light-cone transform (LCT) methods. We propose the Measurement-Adaptive Light-Cone Transform (MALCT), a physics-guided framework that retains the efficient Fourier-domain inversion structure of LCT. {Within a unified variational formulation, MALCT combines the analytical response with a shared learned response through measurement-conditioned weighting and predicts a measurement-conditioned, frequency-dependent regularization map.} An attention-enhanced spatio-temporal feature extraction module captures long-range temporal dependencies and local spatial correlations to support reconstruction under low-signal conditions. Experiments on synthetic data and real measurements from different NLOS systems demonstrate improved reconstruction quality. Controlled evaluations further assess robustness to temporal-response broadening and reduced acquisition time. MALCT also preserves scene structures with spatial sampling grids down to $32\times32$, supporting its potential for NLOS imaging under limited acquisition budgets.

0.35

A Black-Box Positioning Solution for Effortless Integration in Wearable Navigation

cs.RO cs.AR ·2026-10-15 ·Anh-Van Vu, Changmin Sung, Dongsoo Han
published similarity 0.54
Abstract · 8 pages

Accurate localization is critical for a wide range of applications, including navigation, augmented reality, safety management, and healthcare. However, achieving accurate positioning remains challenging, especially in GPS-degraded environments. Pedestrian Dead Reckoning (PDR), which estimates position based on inertial sensor data, offers a promising alternative but typically demands substantial effort in algorithm design and system integration. This complexity often leads to prolonged development timelines and elevated costs. To address these challenges, we present the PDR Sensor (PDRS), a plug-and-play, black-box PDR module optimized for seamless integration into wearable and IoT platforms. PDRS integrates a microprocessor and an inertial measurement unit (IMU) within a compact, low-power module. It executes real-time sensor fusion onboard, providing position updates via standard interfaces (I2C, SPI, UART). Experimental evaluations demonstrate its high robustness, achieving a step detection error of just 0.16% over 1250 steps and a traveled distance error of 1.87% under diverse conditions. The system further exhibits low latency (2.5 ms) and modest power consumption (52.35 mA). Unlike conventional studies, the PDRS leverages a holistic co-design of hardware and software to enhance performance and integration aspects, simplifying adoption without requiring deep expertise. By lowering technical barriers, PDRS enables developers and researchers to prioritize innovation in IoT and wearable technologies, accelerating prototyping, reducing development time, and advancing industry progress. Future work aims to enhance accuracy, reduce power usage and module size, and integrate AI-driven techniques to better mitigate drift.

0.65