CS Paper Radar

Robust Mode Transition for Spacecraft Attitude Control

Emily Burgin, Carl-Johann Winkler, Felix Biertümpfel, Harald Pfifer, Pedro Simplicio

eess.SY ·submitted 2026-09-22 14:41 UTC · v1
highly cited

Abstract

This paper proposes the design of a single linear parameter-varying (LPV) controller for the combined control and smooth transition between two modes in a spacecraft mission. Current industry practice for transitioning between different controller modes is to use a discrete switching approach. When predefined criteria are satisfied, the controller of one mode is turned off and the controller of the other is initialised, resulting in an undesirable transient behaviour. In addition, each controller must individually undergo a rigorous verification and validation (V&V) process. A single controller synthesised using LPV methods streamlines the V&V process and improves the transient behaviour. The proposed design follows a mixed-sensitivity control scheme with LPV weights that are derived from the performance and robustness requirements of the individual modes. The controller is synthesised by minimising the induced $\mathcal{L}_2$-norm of the closed-loop interconnections between the controller and weighted plant. The performance and robustness of the controller is demonstrated on an acquisition and pointing task of a flexible satellite through a Monte-Carlo campaign.

Closest papers

Nearest neighbours by meaning across the whole index.

Variable-Step Time-Delay Control for Proactive Aperiodic Spacecraft Attitude Control

eess.SY ·2026-08-11 ·Yonsoo Kim, Hancheol Cho
published similarity 0.58
Abstract · 17 pages, 12 figures, 4 tables. Revised version (v3) with substantial updates to the theoretical analysis, practical implementation, and num…

This paper addresses proactive aperiodic spacecraft attitude control under model uncertainty, environmental disturbances, and actuator degradation. To this end, we develop Variable step Time Delay Control (VTDC), which jointly designs robust feedback control and control-update scheduling rather than treating them as separate components. Inspired by adaptive stepsize regulation in Runge Kutta integration, VTDC structures the local control error to scale with the realized timestep. Using sliding manifold based Time Delay Control, the resulting System Time Delay Error (TDE), which reflects local model and uncertainty variations, is shown to be quadratically bounded by the control interval. This relation yields a closed form feedback law that enlarges or reduces the subsequent interval to regulate the TDE magnitude. The next update time is therefore determined algebraically without continuous trigger monitoring, future state prediction, or iterative search. The resulting variable step closed loop admits bounded timesteps and step ratios, excludes Zeno behavior, and renders the sliding variable uniformly ultimately bounded. Nonlinear spacecraft attitude control simulations demonstrate accurate tracking with low scheduling cost under representative uncertainties and disturbances.

0.23

Physics-based Online Adaptive Koopman Model Predictive Attitude Control for Combined Spacecraft with Dynamic Uncertainties

eess.SY ·2026-09-02 ·Yicheng Sun, Yueyong Lyu, Yuhan Liu, Yanning Guo, Wei Pan
top venue similarity 0.57
Abstract · 16 pages, 13 figures, 3 tables

This paper proposes a physics-based adaptive Koopman Model Predictive Control (MPC) strategy for combined spacecraft attitude stabilization under inertia uncertainties and active target maneuverability. A novel, quaternion-based Koopman model is constructed from a set of analytical lifting functions derived from the quaternion kinematics, which provides a more compact and physically interpretable linear representation of the nonlinear dynamics compared with the conventional black-box EDMD and higher-dimensional DCM-based model. Leveraging the linear structure of this nominal model, a gradient descent-based update law is employed to efficiently identify time-varying inertial uncertainties from real-time input/output data. By integrating this adaptive linear model into the MPC framework, the optimal control problem reduces to a computationally efficient Quadratic Program (QP), thereby significantly lowering the online computational burden compared to nonlinear adaptive MPC. Recursive feasibility and regional input-to-state stability are formally established through the design of terminal ingredients for the MPC. The effectiveness and superiority of the proposed strategy are validated through comparative simulations of an attitude stabilization task for combined spacecraft in a high-fidelity 3D simulator.

0.48

Explicit Globally Asymptotically Stable Attitude Control with Reaction Wheel Angular Momentum and Torque Constraints

eess.SY math.OC ·2026-10-26 ·Javier Urrios, Rafael Vazquez, Guillermo Pacheco-Ramos
similarity 0.57
Abstract · Preprint accepted in CDC 2026 for presentation

We present an explicit Lyapunov attitude controller for rigid spacecraft actuated by three orthogonally mounted reaction wheels, parameterized using Modified Rodrigues Parameters (MRPs), which enforces hard bounds on wheel angular momentum and applied torque at every instant without solving any online optimization. A barrier-inspired momentum feedback prevents wheel saturation; a continuous positive scalar uniformly scales the feedback whenever a torque limit would otherwise be breached, preserving Lyapunov convergence. For the regulation problem, global asymptotic stability (GAS) is established via LaSalle's invariance principle, and constraint satisfaction is proved analytically for arbitrary symmetric positive-definite inertia matrices. Replacing the barrier by an error-state counterpart extends the design to tracking, with asymptotic (though no longer global) stability and the same safety guarantees under explicit feasibility conditions on the reference. Simulations confirm convergence and constraint satisfaction, and compare performance against other controllers.

0.30

A Modular Open-Source Python Framework for Small Satellite Attitude Determination and Control

eess.SY ·2026-11-02 ·Patrick McKeen, Niclas Scheuer, Kerri Cahoy
code/data similarity 0.55
Abstract · 8 pages, 4 figures, SmallSat Europe 2026

Advanced attitude determination and control (ADCS) techniques can be difficult for small satellite teams to adopt: tightly coupled implementations require substantial code changes to evaluate different actuators, sensors, orbits, mission goals, and control laws. Existing tools often emphasize orbit mechanics or flight software rather than closed-loop ADCS. This paper presents an open-source, modular ADCS framework in pure Python for rapid development, repeatable testing, and flight-oriented integration across heterogeneous spacecraft. The package supports torque- and command-level control, bound-respecting allocation, and full- and reduced-attitude objectives. Interchangeable estimation, control, planning, and actuator/sensor modules are reconfigured through configuration changes. Integrated simulation includes attitude and orbit propagation, sensor and actuator bias and noise, and environmental disturbances. An actuator-aware planner supports underactuated architectures, while hardware-in-the-loop (HIL) capability enables testing on mission-representative computers. Case studies include a 3U CubeSat with three magnetorquers and one reaction wheel, a magnetorquer-only 1U, and a 6U with three reaction wheels and thrusters. These demonstrate actuator and sensor failures, full- and reduced-attitude goals, and momentum management. HIL testing on a Raspberry Pi uses the same package. Adapting a published control law to a new actuator configuration requires fewer than five lines of configuration changes. The framework underpins flight software for an Earth-observing CubeSat with visible and long-wave infrared imagers, three magnetorquers, and one reaction wheel, without star trackers or propulsion.

0.39

Safe Position and Attitude Control for Landing on Small Celestial Bodies with Gravitational Uncertainty

eess.SY math.OC ·2026-10-03 ·Felipe Arenas-Uribe, T. Michael Seigler, Jesse B. Hoagg
theory similarity 0.54
Abstract

Landing on small celestial bodies is challenging because the spacecraft must satisfy safety and actuator constraints despite gravitational forces that are difficult to model accurately. This article presents an optimal control for safe landing with gravitational uncertainty and strict actuator limits. The approach addresses spacecraft pose control with attitude represented on SO(3), where there are actuator constraints and state constraints on position, attitude, velocity, and angular velocity. The approach combines several key techniques. First, the gravitational force uncertainty is estimated using an extended high-gain observer, and we present a new dynamic upper bound on the estimation error. This gravitational estimate and dynamic bound are then used to compute optimal control forces and torques that satisfy state and actuator constraints while tracking a landing trajectory. Optimal forces and torques are obtained from the closed-form solution to a quadratic program that has a single control barrier function constraint constructed by composing multiple control barrier functions that are designed to enforce each state and actuator constraint. Finally, an optimal allocation maps control forces and torques to actuator commands that satisfy actuator constraints. The method is demonstrated in simulation using 2 vehicle configurations with severe gravitational uncertainty.

0.21

Control Barrier Functions for Safe Free-Flying Robotic Spacecraft Operations in Tumbling Target Capture

cs.RO eess.SY ·2026-09-22 ·Alexander Meinert, Peter Stadler, Niklas Baldauf, Alen Turnwald
published similarity 0.53
Abstract · Accepted to the international Conference on Space Robotics (iSpaRo) 2026

This paper presents a modular control barrier function (CBF) framework for safe free-flying robotic spacecraft operations during tumbling target capture. Motivated by latest ESA guidelines for safe close proximity operations, safety zones and requirements are translated into dedicated CBFs. The 13-DoF system is decomposed into translational, attitude, and robotic subsystems, each equipped with a safety filter that minimally modifies nominal control inputs in a lightweight quadratic program. The filters enforce a conical approach corridor, collision avoidance zone, attitude line-of-sight pointing, angular velocity limits, robotic joint limits, link-base collision avoidance, and actuator constraints. Dynamic coupling between subsystems is handled by treating upstream safe control commands as known interconnection inputs in the downstream safety filters, preserving modularity while supporting system-level safety. The framework is validated in an on-orbit servicing scenario, including final approach, angular rate synchronization, and tumbling target grasping, using the high-fidelity astrodynamics simulator Basilisk. Monte Carlo simulation results demonstrate runtime efficiency and operational safety for various tumbling rates.

0.34

Overcoming Fundamental Control Limitations in Powered Descent Flight through Robust Incremental Nonlinear Dynamic Inversion

eess.SY math.OC ·2026-11-05 ·João T. Diz, Paulo Rosa, Pedro Simplício, Paul Acquatella, Erik-Jan van Kampen +1 more
published similarity 0.53
Abstract · 28 pages, 16 figures, 5 tables. Accepted for presentation at the AIAA SciTech 2027 Forum, Orlando, FL, January 2027

This work identifies a fundamental, controller-independent limitation in reusable launch vehicle powered descent: a sudden $180^\circ$ phase transition in the open-loop transfer functions from the control inputs to the lateral drift and drift rate. The transition occurs inside the flight envelope, reverses the effective control direction, and can destabilize the closed loop system under uncertainty. An analytical condition governing this transition is derived, its physical mechanism is established, and its dependence on vehicle mass, aerodynamic properties, and geometry is characterized. An Incremental Nonlinear Dynamic Inversion (INDI)-based control architecture is then developed to inherently address this limitation and is tuned via $\mathcal{H}_\infty$ Closed Loop Shaping to provide local robustness and performance guarantees. The internal dynamics introduced by the INDI inversion are analytically derived and proven to be stable throughout the flight envelope. The proposed controller is compared against a robust gain-scheduled baseline controller through linear stability analysis and an extensive nonlinear Monte Carlo campaign. Both controllers achieve 100% success across the considered Monte Carlo campaign, though the INDI-based controller provides improved tracking performance, superior nominal and dispersed stability margins, requires fewer controller design points, and reduces controller tuning complexity.

0.45

Adaptive sliding mode formation control for space interferometer missions

eess.SY ·2026-09-21 ·Mauro Mancini, Giulia Alessandra Tataru, Satoshi Satoh, Elisa Capello
published similarity 0.53
Abstract

This paper addresses high-precision formation control for spacecraft operating in low Earth orbit, motivated by the requirements of future space interferometry missions such as SILVIA. The proposed approach formulates the relative dynamics within a port-Hamiltonian framework and introduces an Adaptive Boundary-layer Sliding Mode Control (AB-SMC) law to overcome the limitations of conventional SMC with constant gains. The key innovation lies in a dynamic, error-dependent adjustment of the sliding manifold, enhancing transient performance while guaranteeing high-precision trajectory tracking. Rigorous Lyapunov-based analysis establishes explicit ultimate bounds on the tracking error and ensures closed-loop stability, while extensive Monte Carlo simulations further validate the proposed AB-SMC compared to standard control approaches. Results show that AB-SMC achieves faster convergence, lower control effort, and sub-millimeter tracking accuracy, demonstrating its practical robustness and implementation feasibility in realistic, uncertain orbital environments while respecting low-thrust constraints.

0.38