CS Paper Radar

A Modular Open-Source Python Framework for Small Satellite Attitude Determination and Control

Patrick McKeen, Niclas Scheuer, Kerri Cahoy

eess.SY ·submitted 2026-11-02 20:58 UTC · v1
code/data

Abstract

Advanced attitude determination and control (ADCS) techniques can be difficult for small satellite teams to adopt: tightly coupled implementations require substantial code changes to evaluate different actuators, sensors, orbits, mission goals, and control laws. Existing tools often emphasize orbit mechanics or flight software rather than closed-loop ADCS. This paper presents an open-source, modular ADCS framework in pure Python for rapid development, repeatable testing, and flight-oriented integration across heterogeneous spacecraft. The package supports torque- and command-level control, bound-respecting allocation, and full- and reduced-attitude objectives. Interchangeable estimation, control, planning, and actuator/sensor modules are reconfigured through configuration changes. Integrated simulation includes attitude and orbit propagation, sensor and actuator bias and noise, and environmental disturbances. An actuator-aware planner supports underactuated architectures, while hardware-in-the-loop (HIL) capability enables testing on mission-representative computers. Case studies include a 3U CubeSat with three magnetorquers and one reaction wheel, a magnetorquer-only 1U, and a 6U with three reaction wheels and thrusters. These demonstrate actuator and sensor failures, full- and reduced-attitude goals, and momentum management. HIL testing on a Raspberry Pi uses the same package. Adapting a published control law to a new actuator configuration requires fewer than five lines of configuration changes. The framework underpins flight software for an Earth-observing CubeSat with visible and long-wave infrared imagers, three magnetorquers, and one reaction wheel, without star trackers or propulsion.

Comment
8 pages, 4 figures, SmallSat Europe 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Learning-Based Adaptive MPC for Magnetorquer-Only Satellite Attitude Control

cs.RO ·2026-10-14 ·Patrick Schwartz, Abhishek Cauligi
published similarity 0.61
Abstract · 8 pages, 8 figures, 1 table, Accepted for publication at the International Conference on Space Robotics (iSpaRo) 2026

Nanosatellites (e.g., CubeSats) have the potential to carry out useful science and exploration activities for outer solar system exploration, but their small size leads to tradeoffs between attitude control and science capabilities. Magnetorquers offer a unique compromise as compact actuators that enable three-axis attitude control, but suffer from a loss of control authority and require full knowledge of the planetary magnetic field. In this work, we present a learning-based adaptive model predictive control (MPC) algorithm that plans rotational trajectories for the satellite while accounting for this loss of control authority. Key to our approach is the inclusion of a learned magnetic field model that is trained in simulation using low-fidelity magnetic field data. Using measurements collected online, our proposed algorithm adapts this learned magnetic field model using a simple last-layer update scheme, allowing the MPC controller to quickly adapt to the true planetary magnetic field model and more effectively plan attitude trajectories. We demonstrate the results of our proposed approach for two use cases, (1) Earth-orbit and (2) Uranus-orbit, and show that our learning-based adaptive MPC algorithm improves controller success for these system simulations by 5% and 61%, respectively.

0.33

Trajectory-Planning Attitude Control System for Satellites with Magnetic Attitude Control and One Reaction Wheel

eess.SY math.OC ·2026-10-27 ·Patrick McKeen, Alex Meredith, Kerri Cahoy
similarity 0.60
Abstract · 19 pages, 26 figures in 14 groups, AAS/AIAA Astrodynamics Specialist Conference

Selecting attitude actuators for spacecraft in low earth orbit (LEO) often involves a trade between reaction wheels and magnetorquers. Reaction wheels generally have higher size, weight and power as well as cost, compared with magnetorquers, but have performance advantages. We consider a hybrid system relying on a single reaction wheel and three magnetorquers, using a trajectory planning control method that focuses on meeting pointing goals and minimizing the need to desaturate the reaction wheel. The use of planning allows for intelligent use of the reaction wheel and accommodates time-changing goals and orbit-varying magnetic fields. Preliminary results show trajectories with fractional-degree-accuracy, as well as management of reaction wheel momentum and avoidance of stiction. We also compare to a magnetorquer-only planning-based control system and show better convergence and faster slews.

0.34

A Practical Framework for Incremental Testing and Technology Maturation of Spacecraft Autonomy

eess.SY ·2026-10-14 ·Kerianne Hobbs, Ben Bycroft, Pamela Wood, Mathew W. Bissonnette, M. J. Durst +17 more
similarity 0.59
Abstract

This paper addresses the "trust gap" in deploying AI-enabled spacecraft autonomy through an integrated verification framework combining offline ground testing with online flight monitoring. The offline phase progresses systematically through simulation studies, processor-in-the-loop (PIL), hardware-in-the-loop (HIL), and robotic emulation testing, culminating in flight validation. The online phase employs AI watchdog systems for performance monitoring and safety guardrails for real-time constraint enforcement. Key contributions include: (1) systematic organization of verification techniques emphasizing closed-loop behavioral testing at each phase, (2) integration of AI watchdogs with runtime assurance, and (3) demonstration of the framework through a reinforcement learning-based attitude control case study. This approach integrates mature technologies to provide a viable pathway for safe deployment of AI-enabled autonomy in high-consequence space operations while addressing simulation-to-reality transfer challenges.

0.17

Control Barrier Functions for Safe Free-Flying Robotic Spacecraft Operations in Tumbling Target Capture

cs.RO eess.SY ·2026-09-22 ·Alexander Meinert, Peter Stadler, Niklas Baldauf, Alen Turnwald
published similarity 0.58
Abstract · Accepted to the international Conference on Space Robotics (iSpaRo) 2026

This paper presents a modular control barrier function (CBF) framework for safe free-flying robotic spacecraft operations during tumbling target capture. Motivated by latest ESA guidelines for safe close proximity operations, safety zones and requirements are translated into dedicated CBFs. The 13-DoF system is decomposed into translational, attitude, and robotic subsystems, each equipped with a safety filter that minimally modifies nominal control inputs in a lightweight quadratic program. The filters enforce a conical approach corridor, collision avoidance zone, attitude line-of-sight pointing, angular velocity limits, robotic joint limits, link-base collision avoidance, and actuator constraints. Dynamic coupling between subsystems is handled by treating upstream safe control commands as known interconnection inputs in the downstream safety filters, preserving modularity while supporting system-level safety. The framework is validated in an on-orbit servicing scenario, including final approach, angular rate synchronization, and tumbling target grasping, using the high-fidelity astrodynamics simulator Basilisk. Monte Carlo simulation results demonstrate runtime efficiency and operational safety for various tumbling rates.

0.34

Safe Position and Attitude Control for Landing on Small Celestial Bodies with Gravitational Uncertainty

eess.SY math.OC ·2026-10-03 ·Felipe Arenas-Uribe, T. Michael Seigler, Jesse B. Hoagg
theory similarity 0.58
Abstract

Landing on small celestial bodies is challenging because the spacecraft must satisfy safety and actuator constraints despite gravitational forces that are difficult to model accurately. This article presents an optimal control for safe landing with gravitational uncertainty and strict actuator limits. The approach addresses spacecraft pose control with attitude represented on SO(3), where there are actuator constraints and state constraints on position, attitude, velocity, and angular velocity. The approach combines several key techniques. First, the gravitational force uncertainty is estimated using an extended high-gain observer, and we present a new dynamic upper bound on the estimation error. This gravitational estimate and dynamic bound are then used to compute optimal control forces and torques that satisfy state and actuator constraints while tracking a landing trajectory. Optimal forces and torques are obtained from the closed-form solution to a quadratic program that has a single control barrier function constraint constructed by composing multiple control barrier functions that are designed to enforce each state and actuator constraint. Finally, an optimal allocation maps control forces and torques to actuator commands that satisfy actuator constraints. The method is demonstrated in simulation using 2 vehicle configurations with severe gravitational uncertainty.

0.21

PINGU: Extending Air-Bearing Spacecraft Emulators with Open-Source Actuators and Learned Control for Contact-Rich Proximity Operations

cs.RO ·2026-09-20 ·Ricard Marsal I Castan, Akiyoshi Uchida, Aman Arora, Pedro Lima, Matteo El-Hariry +5 more
benchmarkcode/data similarity 0.57
Abstract

Low-cost planar air-bearing testbeds have matured into a standard proxy for free-flying spacecraft GNC, but they remain largely thruster-only and are rarely equipped for contact-rich, inertia-coupled manipulation. Building on the open-source ATMOS testbed, we contribute a reaction wheel and two force/torque-sensed robotic arms (LEVION) with interchangeable end-effectors, integrated as first-class control actuators through a unified ROS 2 abstraction layer. On top of the software stack we build a reinforcement-learning training environment and digital twin, and a controller that exploits these added degrees of freedom, letting classical optimal controllers and learned policies be swapped on the same hardware without modification. We validate the integrated system, PINGU, across four benchmark tasks: point-to-pose navigation (classical LQR vs. sim-to-real PPO), dynamic disturbance rejection under arm-induced center-of-mass shifts, reaction-wheel momentum stabilization, and force-controlled docking. The results show that these additions extend an ATMOS-class emulator into the contact-rich regime and bridge classical optimal control and reinforcement learning on one reproducible platform.

0.28

Robust Mode Transition for Spacecraft Attitude Control

eess.SY ·2026-09-22 ·Emily Burgin, Carl-Johann Winkler, Felix Biertümpfel, Harald Pfifer, Pedro Simplicio
highly cited similarity 0.55
Abstract

This paper proposes the design of a single linear parameter-varying (LPV) controller for the combined control and smooth transition between two modes in a spacecraft mission. Current industry practice for transitioning between different controller modes is to use a discrete switching approach. When predefined criteria are satisfied, the controller of one mode is turned off and the controller of the other is initialised, resulting in an undesirable transient behaviour. In addition, each controller must individually undergo a rigorous verification and validation (V&V) process. A single controller synthesised using LPV methods streamlines the V&V process and improves the transient behaviour. The proposed design follows a mixed-sensitivity control scheme with LPV weights that are derived from the performance and robustness requirements of the individual modes. The controller is synthesised by minimising the induced $\mathcal{L}_2$-norm of the closed-loop interconnections between the controller and weighted plant. The performance and robustness of the controller is demonstrated on an acquisition and pointing task of a flexible satellite through a Monte-Carlo campaign.

0.47

Control of Decommissioned Satellites and Space Debris Using CubeSats with Ion Electrospray Engines

eess.SY ·2026-08-31 ·Felix Biertümpfel, Peter Seiler, Paulo Lozano, Harald Pfifer
published similarity 0.55
Abstract · Accepted manuscript to AIAA SciTech 2026

The emergence of the New Space era has led to a rapidly increasing number of satellites in Low Earth Orbit (LEO). Consequently, more stringent deorbiting requirements have recently been imposed to avoid the Kessler syndrome in LEO. This has resulted in the proposal of new concepts for space debris removal, including attaching CubeSats to space debris as a promising mitigation strategy. The initial phase of this strategy involves stabilizing and controlling the debris' attitude. This paper proposes an attitude control design for decommissioned satellites using attached CubeSats with staged ion electrospray engines (iESE). The compact design of iESE combined with staging provides increased reliability and mission durations. The large uncertainty in the dynamics of the combined system, i.e. satellite and attached CubeSats, poses a significant challenge to the control design. The approach taken here uses the robust control framework, specifically $μ$-synthesis, to tackle this challenge. The feasibility of the approach is demonstrated on a decommissioned satellite with multiple flexile appendages.

0.35