CS Paper Radar

Control of Decommissioned Satellites and Space Debris Using CubeSats with Ion Electrospray Engines

Felix Biertümpfel, Peter Seiler, Paulo Lozano, Harald Pfifer

eess.SY ·submitted 2026-08-31 03:58 UTC · v1
published

Abstract

The emergence of the New Space era has led to a rapidly increasing number of satellites in Low Earth Orbit (LEO). Consequently, more stringent deorbiting requirements have recently been imposed to avoid the Kessler syndrome in LEO. This has resulted in the proposal of new concepts for space debris removal, including attaching CubeSats to space debris as a promising mitigation strategy. The initial phase of this strategy involves stabilizing and controlling the debris' attitude. This paper proposes an attitude control design for decommissioned satellites using attached CubeSats with staged ion electrospray engines (iESE). The compact design of iESE combined with staging provides increased reliability and mission durations. The large uncertainty in the dynamics of the combined system, i.e. satellite and attached CubeSats, poses a significant challenge to the control design. The approach taken here uses the robust control framework, specifically $μ$-synthesis, to tackle this challenge. The feasibility of the approach is demonstrated on a decommissioned satellite with multiple flexile appendages.

Comment
Accepted manuscript to AIAA SciTech 2026

Closest papers

Nearest neighbours by meaning across the whole index.

A Modular Open-Source Python Framework for Small Satellite Attitude Determination and Control

eess.SY ·2026-11-02 ·Patrick McKeen, Niclas Scheuer, Kerri Cahoy
code/data similarity 0.55
Abstract · 8 pages, 4 figures, SmallSat Europe 2026

Advanced attitude determination and control (ADCS) techniques can be difficult for small satellite teams to adopt: tightly coupled implementations require substantial code changes to evaluate different actuators, sensors, orbits, mission goals, and control laws. Existing tools often emphasize orbit mechanics or flight software rather than closed-loop ADCS. This paper presents an open-source, modular ADCS framework in pure Python for rapid development, repeatable testing, and flight-oriented integration across heterogeneous spacecraft. The package supports torque- and command-level control, bound-respecting allocation, and full- and reduced-attitude objectives. Interchangeable estimation, control, planning, and actuator/sensor modules are reconfigured through configuration changes. Integrated simulation includes attitude and orbit propagation, sensor and actuator bias and noise, and environmental disturbances. An actuator-aware planner supports underactuated architectures, while hardware-in-the-loop (HIL) capability enables testing on mission-representative computers. Case studies include a 3U CubeSat with three magnetorquers and one reaction wheel, a magnetorquer-only 1U, and a 6U with three reaction wheels and thrusters. These demonstrate actuator and sensor failures, full- and reduced-attitude goals, and momentum management. HIL testing on a Raspberry Pi uses the same package. Adapting a published control law to a new actuator configuration requires fewer than five lines of configuration changes. The framework underpins flight software for an Earth-observing CubeSat with visible and long-wave infrared imagers, three magnetorquers, and one reaction wheel, without star trackers or propulsion.

0.39

Adaptive Relative Orbit Control Considering Laser Ablation Uncertainty

eess.SY ·2026-08-17 ·Shun Isobe, Yasuhiro Yoshimura, Toshiya Hanada, Yuki Itaya, Tadanori Fukushima
published similarity 0.54
Abstract · Accepted for publication in Acta Astronautica

This study proposes a relative orbit control law for laser debris removal missions considering the uncertainties of laser ablation and atmospheric drag. A removal spacecraft irradiates laser pulses to a target debris to generate the ablation force for deorbiting. The deorbiting force lowers the target altitude, and the removal spacecraft must follow it to maintain its relative position for continuous laser irradiation. The difficulty stems from uncertainties of the magnitude of laser ablation and external disturbances such as atmospheric drag. To tackle this problem, this study derives an adaptive control method using the Gaussian process regression to cancel the uncertainties with a nonparametric regression model. Numerical simulations verify the proposed control law under the uncertainties of laser ablation and atmospheric drag. The proposed control law can contribute to the realization of a safer and more secure mission not only for laser debris removal missions, but also for other on-orbit services.

0.47

Trajectory-Planning Attitude Control System for Satellites with Magnetic Attitude Control and One Reaction Wheel

eess.SY math.OC ·2026-10-27 ·Patrick McKeen, Alex Meredith, Kerri Cahoy
similarity 0.53
Abstract · 19 pages, 26 figures in 14 groups, AAS/AIAA Astrodynamics Specialist Conference

Selecting attitude actuators for spacecraft in low earth orbit (LEO) often involves a trade between reaction wheels and magnetorquers. Reaction wheels generally have higher size, weight and power as well as cost, compared with magnetorquers, but have performance advantages. We consider a hybrid system relying on a single reaction wheel and three magnetorquers, using a trajectory planning control method that focuses on meeting pointing goals and minimizing the need to desaturate the reaction wheel. The use of planning allows for intelligent use of the reaction wheel and accommodates time-changing goals and orbit-varying magnetic fields. Preliminary results show trajectories with fractional-degree-accuracy, as well as management of reaction wheel momentum and avoidance of stiction. We also compare to a magnetorquer-only planning-based control system and show better convergence and faster slews.

0.34

Suboptimal Formation Reconfiguration of Satellites Under Input Directional Constraints

eess.SY ·2026-08-19 ·Yasuhiro Yoshimura
published similarity 0.52
Abstract · Accepted for publication in Advances in Space Research

Proximity operations of satellites such as formation flying and on-orbit servicing offer more advanced missions than missions achieved by a single satellite. In a practical situation of formation flying, thrust directions for keeping and controlling a relative orbit is limited, e.g., for astronomical observation and plume impingement avoidance. The aim of this paper is to provide an energy efficient control method for a formation reconfiguration under input directional constraints with respect to both an inertial and a leader-fixed frames. The proposed controller is designed consisting of two parts: 1) guaranteeing a formation reconfiguration to a desirable formation on the basis of an energy optimal controller and 2) satisfying the input directional constraints by superimposing additional inputs. The analytical form of the control input shows that the input direction forms an ellipse in the leader-fixed frame when a particular boundary condition is satisfied, which is exploited as a nominal controller to take into account the input directional constraints. Due to the singular avoidance of the nominal controller, the additional inputs can be analytically obtained. The effect on the follower trajectory due to the additional inputs is compensated by setting a virtual target orbit, and thus the successful formation reconfiguration is still guaranteed. Some numerical simulation results verify the effectiveness of the proposed method and compare the energy efficiency.

0.69

Formation Keeping Control for Deorbiting an Uncooperative Satellite by Laser Ablation

eess.SY ·2026-08-19 ·Shun Isobe, Yasuhiro Yoshimura, Toshiya Hanada, Yuki Itaya, Tadanori Fukushima
published similarity 0.52
Abstract · Accepted for publication in Advances in Space Research

This paper proposes the formation keeping control law for deorbiting debris by a laser ablation. Laser ablation is vital technology for contactless active debris removal, where a chaser satellite with a laser system irradiates laser pulses to a target object to generate the ablation force for deorbiting. The deorbiting force decelerates the target, and the chaser must maintain its relative position and continue irradiating. In other words, both the chaser and the target are supposed to be deorbited simultaneously, where both have accelerations. Although conventional formation flying missions assume that only a chaser maneuvers, the formation flying in this paper considers that both a chaser and a target have accelerations. Thus, this paper derives the relative equations of motion between the chaser and the target in powered flight and their analytical solution using relative orbital elements. A control law based on the analytical solution is proposed, which determines the timings and directions of the laser ablation and the electrical thrust so that the formation periodically returns to a desired formation. Numerical simulations first examine the control law in two cases with different maneuver timings. Then, a Monte Carlo simulation is performed to verify the effectiveness of the control law for a variety of desired formations.

0.57

Robust Mode Transition for Spacecraft Attitude Control

eess.SY ·2026-09-22 ·Emily Burgin, Carl-Johann Winkler, Felix Biertümpfel, Harald Pfifer, Pedro Simplicio
highly cited similarity 0.51
Abstract

This paper proposes the design of a single linear parameter-varying (LPV) controller for the combined control and smooth transition between two modes in a spacecraft mission. Current industry practice for transitioning between different controller modes is to use a discrete switching approach. When predefined criteria are satisfied, the controller of one mode is turned off and the controller of the other is initialised, resulting in an undesirable transient behaviour. In addition, each controller must individually undergo a rigorous verification and validation (V&V) process. A single controller synthesised using LPV methods streamlines the V&V process and improves the transient behaviour. The proposed design follows a mixed-sensitivity control scheme with LPV weights that are derived from the performance and robustness requirements of the individual modes. The controller is synthesised by minimising the induced $\mathcal{L}_2$-norm of the closed-loop interconnections between the controller and weighted plant. The performance and robustness of the controller is demonstrated on an acquisition and pointing task of a flexible satellite through a Monte-Carlo campaign.

0.47

Safe Position and Attitude Control for Landing on Small Celestial Bodies with Gravitational Uncertainty

eess.SY math.OC ·2026-10-03 ·Felipe Arenas-Uribe, T. Michael Seigler, Jesse B. Hoagg
theory similarity 0.50
Abstract

Landing on small celestial bodies is challenging because the spacecraft must satisfy safety and actuator constraints despite gravitational forces that are difficult to model accurately. This article presents an optimal control for safe landing with gravitational uncertainty and strict actuator limits. The approach addresses spacecraft pose control with attitude represented on SO(3), where there are actuator constraints and state constraints on position, attitude, velocity, and angular velocity. The approach combines several key techniques. First, the gravitational force uncertainty is estimated using an extended high-gain observer, and we present a new dynamic upper bound on the estimation error. This gravitational estimate and dynamic bound are then used to compute optimal control forces and torques that satisfy state and actuator constraints while tracking a landing trajectory. Optimal forces and torques are obtained from the closed-form solution to a quadratic program that has a single control barrier function constraint constructed by composing multiple control barrier functions that are designed to enforce each state and actuator constraint. Finally, an optimal allocation maps control forces and torques to actuator commands that satisfy actuator constraints. The method is demonstrated in simulation using 2 vehicle configurations with severe gravitational uncertainty.

0.21

Optimization of Fault-Tolerant Thruster Configurations for Satellite Control

eess.SY ·2026-08-19 ·Yasuhiro Yoshimura, Hirohisa Kojima
publishedunusualhighly cited similarity 0.48
Abstract · Accepted for publication in Advances in Space Research

The fault tolerance of spacecraft actuators significantly affects the reliability of satellites and the likelihood of successful missions. To enhance the fault tolerance of the actuators, this study derives optimal fault-tolerant configurations of fixed thrusters that maximize the controllability of a fully-actuated or underactuated satellite. The proposed method optimizes thrust and torque directions generated by the thrusters. Thus a cost function in terms of the thruster locations and directions is defined as the summation of the generated control forces and torques with respect to the body-fixed frame. The optimal configuration is obtained by the successive use of an energy potential method that is motivated by Thomson's problem. Some numerical examples are provided that show the effectiveness of the proposed formulation and optimization method.

0.68