CS Paper Radar

Formation Keeping Control for Deorbiting an Uncooperative Satellite by Laser Ablation

Shun Isobe, Yasuhiro Yoshimura, Toshiya Hanada, Yuki Itaya, Tadanori Fukushima

eess.SY ·submitted 2026-08-19 13:00 UTC · v1
published

Abstract

This paper proposes the formation keeping control law for deorbiting debris by a laser ablation. Laser ablation is vital technology for contactless active debris removal, where a chaser satellite with a laser system irradiates laser pulses to a target object to generate the ablation force for deorbiting. The deorbiting force decelerates the target, and the chaser must maintain its relative position and continue irradiating. In other words, both the chaser and the target are supposed to be deorbited simultaneously, where both have accelerations. Although conventional formation flying missions assume that only a chaser maneuvers, the formation flying in this paper considers that both a chaser and a target have accelerations. Thus, this paper derives the relative equations of motion between the chaser and the target in powered flight and their analytical solution using relative orbital elements. A control law based on the analytical solution is proposed, which determines the timings and directions of the laser ablation and the electrical thrust so that the formation periodically returns to a desired formation. Numerical simulations first examine the control law in two cases with different maneuver timings. Then, a Monte Carlo simulation is performed to verify the effectiveness of the control law for a variety of desired formations.

Comment
Accepted for publication in Advances in Space Research

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Relative Orbit Control Considering Laser Ablation Uncertainty

eess.SY ·2026-08-17 ·Shun Isobe, Yasuhiro Yoshimura, Toshiya Hanada, Yuki Itaya, Tadanori Fukushima
published similarity 0.68
Abstract · Accepted for publication in Acta Astronautica

This study proposes a relative orbit control law for laser debris removal missions considering the uncertainties of laser ablation and atmospheric drag. A removal spacecraft irradiates laser pulses to a target debris to generate the ablation force for deorbiting. The deorbiting force lowers the target altitude, and the removal spacecraft must follow it to maintain its relative position for continuous laser irradiation. The difficulty stems from uncertainties of the magnitude of laser ablation and external disturbances such as atmospheric drag. To tackle this problem, this study derives an adaptive control method using the Gaussian process regression to cancel the uncertainties with a nonparametric regression model. Numerical simulations verify the proposed control law under the uncertainties of laser ablation and atmospheric drag. The proposed control law can contribute to the realization of a safer and more secure mission not only for laser debris removal missions, but also for other on-orbit services.

0.47

Assessing Collision Probability in Low-Thrust Deorbit

eess.SY ·2026-08-18 ·Shuta Fukii, Daisuke Sakai, Yasuhiro Yoshimura, Yuri Matsushita, Toshiya Hanada +2 more
published similarity 0.61
Abstract · Accepted for publication in Journal of Space Safety Engineering

End-of-life support of satellites is necessary to improve post-mission-disposal compliance rates for maintaining space environment. Deorbit mission with low thrust, e.g. a laser, induces a low-level deceleration on the target object that gradually lowers the target altitude. Since such a low-thrust trajectory is time-consuming, the risk of collision greatly influences the mission success rate. In this context, this paper assesses the collision risk during deorbit trajectories with low thrust. Furthermore, parametric studies for the relationship between the re-entry time and the risk of collision are performed.

0.66

Concept and Rationale for Stratospheric Balloon-Based Laser Debris Removal

eess.SY ·2026-09-30 ·F. Ruiz Vincueria, M. Divoky, E. Sanchez-Laulhe, H. Yang, J. Rodrıguez +7 more
similarity 0.60
Abstract

Laser-based deorbiting has long been proposed as a promising technique for mitigating the growing population of orbital debris, particularly decimetre-scale objects -- large enough to cause catastrophic collisions yet too small to be economically captured by current active debris removal (ADR) missions. However, the practical implementation of laser-based approaches remains constrained by several factors. Ground-based systems suffer from atmospheric absorption, scattering, and turbulence, which degrade beam quality and limit effective energy delivery. Space-based platforms benefit from superior propagation efficiency, enabling more compact and lower-power systems, but require complex, high-cost orbital infrastructure with demanding deployment, maintenance, and scalability challenges. This paper proposes a stratospheric balloon-based concept for laser debris removal, exploring the intermediate regime between ground-based and space-based approaches. Operating above 99% of the atmospheric mass, such a platform may enable ultraviolet (3HG/4HG) laser operation -- largely precluded from ground level by ozone absorption -- with improved propagation and ablation coupling efficiency, while presenting a different set of engineering constraints than orbital systems. Rather than a fully developed system, this work focuses on the conceptual design and underlying rationale. We describe the main architectural elements, discuss the expected operational envelope, and position the concept against existing ground- and space-based solutions, identifying potential advantages as well as key challenges and limitations requiring further investigation. Developed within STRATOLASER, an EIC Pathfinder Challenge project targeting TRL 4 through stratospheric balloon experiments.

0.21

Suboptimal Formation Reconfiguration of Satellites Under Input Directional Constraints

eess.SY ·2026-08-19 ·Yasuhiro Yoshimura
published similarity 0.56
Abstract · Accepted for publication in Advances in Space Research

Proximity operations of satellites such as formation flying and on-orbit servicing offer more advanced missions than missions achieved by a single satellite. In a practical situation of formation flying, thrust directions for keeping and controlling a relative orbit is limited, e.g., for astronomical observation and plume impingement avoidance. The aim of this paper is to provide an energy efficient control method for a formation reconfiguration under input directional constraints with respect to both an inertial and a leader-fixed frames. The proposed controller is designed consisting of two parts: 1) guaranteeing a formation reconfiguration to a desirable formation on the basis of an energy optimal controller and 2) satisfying the input directional constraints by superimposing additional inputs. The analytical form of the control input shows that the input direction forms an ellipse in the leader-fixed frame when a particular boundary condition is satisfied, which is exploited as a nominal controller to take into account the input directional constraints. Due to the singular avoidance of the nominal controller, the additional inputs can be analytically obtained. The effect on the follower trajectory due to the additional inputs is compensated by setting a virtual target orbit, and thus the successful formation reconfiguration is still guaranteed. Some numerical simulation results verify the effectiveness of the proposed method and compare the energy efficiency.

0.69

Control of Decommissioned Satellites and Space Debris Using CubeSats with Ion Electrospray Engines

eess.SY ·2026-08-31 ·Felix Biertümpfel, Peter Seiler, Paulo Lozano, Harald Pfifer
published similarity 0.52
Abstract · Accepted manuscript to AIAA SciTech 2026

The emergence of the New Space era has led to a rapidly increasing number of satellites in Low Earth Orbit (LEO). Consequently, more stringent deorbiting requirements have recently been imposed to avoid the Kessler syndrome in LEO. This has resulted in the proposal of new concepts for space debris removal, including attaching CubeSats to space debris as a promising mitigation strategy. The initial phase of this strategy involves stabilizing and controlling the debris' attitude. This paper proposes an attitude control design for decommissioned satellites using attached CubeSats with staged ion electrospray engines (iESE). The compact design of iESE combined with staging provides increased reliability and mission durations. The large uncertainty in the dynamics of the combined system, i.e. satellite and attached CubeSats, poses a significant challenge to the control design. The approach taken here uses the robust control framework, specifically $μ$-synthesis, to tackle this challenge. The feasibility of the approach is demonstrated on a decommissioned satellite with multiple flexile appendages.

0.35

Finite-Time Capture by a Dubins Pursuer Against Unknown Evader Strategies

eess.SY cs.RO ·2026-10-18 ·Dinesh Patra, Bhargav Jha, Ashish R. Hota
similarity 0.50
Abstract

We consider a planar pursuit-evasion problem in which a Dubins pursuer seeks to capture a slower first-order point-mass evader that can change its heading instantaneously. First, we propose a turn-rate feedback law with a single tunable gain and derive an explicit admissible gain interval that guarantees finite-time capture against any admissible evader strategy while satisfying the turn-rate constraint. Next, we obtain an explicit capture-time bound and characterize the turning authority required for the gain interval to be non-empty. Finally, we show that the dependence on the evader's speed bound can be removed by deriving a speed ceiling, computable solely from the pursuer's parameters, below which the guarantees hold at the maximum allowable gain. Numerical simulations illustrate the effectiveness of the proposed approach.

0.20

Two-impulse Rendezvous Planning about Thrusting Spacecraft on SE2(3)

eess.SY ·2026-09-23 ·Micah Condie, Abigaile Woodbury, James Goppert
hot direction similarity 0.49
Abstract

The classical Hill--Clohessy--Wiltshire equations assume an unforced Keplerian reference trajectory, an assumption that is violated by missions requiring continuous thrust. We formulate spacecraft relative motion on the $\mathrm{SE}_2(3)$ Lie group, which encodes position, velocity, and attitude in a single geometric state, linearize the gravity and body-frame control mismatches between the two vehicles, and derive analytic bounds on every neglected term. Under circular coasting Keplerian assumptions the framework recovers the Hill--Clohessy--Wiltshire equations exactly. For thrusting references the state transition matrix acquires thrust-induced attitude--translation coupling blocks that, when the two vehicles share body-frame inputs, are exact in log coordinates and independent of the attitude error, and a mismatch between the vehicles' inputs re-centers the linearization at their mean. A two-impulse rendezvous planner follows directly. A scalar coupling ratio, computable before planning, separates two regimes. Where it exceeds unity, the planner reduces the terminal error of coupling-blind planners by more than an order of magnitude, and somewhat above unity it is also more accurate than a Cartesian planner of the same computational structure; well below unity, simpler planners are adequate or better. Simulations confirm the recovery to machine precision and validate every bound along the transfer.

0.33

Control Barrier Functions for Safe Free-Flying Robotic Spacecraft Operations in Tumbling Target Capture

cs.RO eess.SY ·2026-09-22 ·Alexander Meinert, Peter Stadler, Niklas Baldauf, Alen Turnwald
published similarity 0.48
Abstract · Accepted to the international Conference on Space Robotics (iSpaRo) 2026

This paper presents a modular control barrier function (CBF) framework for safe free-flying robotic spacecraft operations during tumbling target capture. Motivated by latest ESA guidelines for safe close proximity operations, safety zones and requirements are translated into dedicated CBFs. The 13-DoF system is decomposed into translational, attitude, and robotic subsystems, each equipped with a safety filter that minimally modifies nominal control inputs in a lightweight quadratic program. The filters enforce a conical approach corridor, collision avoidance zone, attitude line-of-sight pointing, angular velocity limits, robotic joint limits, link-base collision avoidance, and actuator constraints. Dynamic coupling between subsystems is handled by treating upstream safe control commands as known interconnection inputs in the downstream safety filters, preserving modularity while supporting system-level safety. The framework is validated in an on-orbit servicing scenario, including final approach, angular rate synchronization, and tumbling target grasping, using the high-fidelity astrodynamics simulator Basilisk. Monte Carlo simulation results demonstrate runtime efficiency and operational safety for various tumbling rates.

0.34