CS Paper Radar

Suboptimal Formation Reconfiguration of Satellites Under Input Directional Constraints

Yasuhiro Yoshimura

eess.SY ·submitted 2026-08-19 13:37 UTC · v1
published

Abstract

Proximity operations of satellites such as formation flying and on-orbit servicing offer more advanced missions than missions achieved by a single satellite. In a practical situation of formation flying, thrust directions for keeping and controlling a relative orbit is limited, e.g., for astronomical observation and plume impingement avoidance. The aim of this paper is to provide an energy efficient control method for a formation reconfiguration under input directional constraints with respect to both an inertial and a leader-fixed frames. The proposed controller is designed consisting of two parts: 1) guaranteeing a formation reconfiguration to a desirable formation on the basis of an energy optimal controller and 2) satisfying the input directional constraints by superimposing additional inputs. The analytical form of the control input shows that the input direction forms an ellipse in the leader-fixed frame when a particular boundary condition is satisfied, which is exploited as a nominal controller to take into account the input directional constraints. Due to the singular avoidance of the nominal controller, the additional inputs can be analytically obtained. The effect on the follower trajectory due to the additional inputs is compensated by setting a virtual target orbit, and thus the successful formation reconfiguration is still guaranteed. Some numerical simulation results verify the effectiveness of the proposed method and compare the energy efficiency.

Comment
Accepted for publication in Advances in Space Research

Closest papers

Nearest neighbours by meaning across the whole index.

Decentralized Power-Optimal Coordination for Spacecraft Swarms Using Time-Varying Magnetorquer Actuation

eess.SY cs.MA ·2026-10-01 ·Yuta Takahashi, Shin-ichiro Sakai
similarity 0.60
Abstract · Submitted to IEEE Transactions on Aerospace and Electronic Systems

This paper presents a decentralized power-optimal coordination framework for magnetically actuated spacecraft swarms. Swarms that form large space structures overcome the aperture limit set by the launch vehicle and hold their shape on solar-generated power alone. Magnetic actuation is propellant-free and generated by a magnetorquer, which is commonly used for attitude control. However, every spacecraft interacts with every other within range, and its effect depends on the actuation power and a carrier frequency. We therefore design a decentralized power-optimal framework to jointly derive the interaction graph, frequency grouping, and controller gains. Our decentralized controller preserves angular momentum, which is a nonholonomic constraint. Then, this framework for connected groups whose memberships overlap across carriers guarantees that the relative position errors, the absolute attitude errors, and the imbalance of the reaction-wheel momenta converge to the desired states under the decentralized power-optimal allocation. A closed-loop simulation of a thousand spacecraft with the complete alternating-current interaction confirms the framework. A fast approximate integration with a proven error bound extends the framework to a long-horizon orbital reconfiguration held with high precision.

0.45

Two-impulse Rendezvous Planning about Thrusting Spacecraft on SE2(3)

eess.SY ·2026-09-23 ·Micah Condie, Abigaile Woodbury, James Goppert
hot direction similarity 0.59
Abstract

The classical Hill--Clohessy--Wiltshire equations assume an unforced Keplerian reference trajectory, an assumption that is violated by missions requiring continuous thrust. We formulate spacecraft relative motion on the $\mathrm{SE}_2(3)$ Lie group, which encodes position, velocity, and attitude in a single geometric state, linearize the gravity and body-frame control mismatches between the two vehicles, and derive analytic bounds on every neglected term. Under circular coasting Keplerian assumptions the framework recovers the Hill--Clohessy--Wiltshire equations exactly. For thrusting references the state transition matrix acquires thrust-induced attitude--translation coupling blocks that, when the two vehicles share body-frame inputs, are exact in log coordinates and independent of the attitude error, and a mismatch between the vehicles' inputs re-centers the linearization at their mean. A two-impulse rendezvous planner follows directly. A scalar coupling ratio, computable before planning, separates two regimes. Where it exceeds unity, the planner reduces the terminal error of coupling-blind planners by more than an order of magnitude, and somewhat above unity it is also more accurate than a Cartesian planner of the same computational structure; well below unity, simpler planners are adequate or better. Simulations confirm the recovery to machine precision and validate every bound along the transfer.

0.33

Decentralized Bi-Level Optimization for Cooperative Orbital Transportation of a Rigid Payload

eess.SY cs.MAcs.RO ·2026-10-22 ·Sidhdharth D. Sikka, Revathy Ravuri, Hei Yin Jowett Chan, Tim Echtermeyer, Shaoshuai Mou
similarity 0.58
Abstract · 10 pages, 6 figures, 4 tables

The rapid growth of the space economy, alongside increasing orbital congestion and debris, is driving demand for reliable on-orbit transportation of large and non-cooperative objects. Performing such transportation with a swarm of small spacecraft distributes risk and removes the single point of failure inherent to monolithic architectures, but requires solving a non-convex trajectory optimization coupling every agent's cone-constrained thrust to the payload's rotational dynamics. Existing approaches span decentralized control laws with asymptotic guarantees but limited constraint enforcement, and centralized and partially centralized planners that reintroduce a single point of failure. In this work, we present a decentralized bi-level framework driven by exact gradients: the problem is split into an inner convex thrust allocation and an outer search over payload torque trajectories. This decomposition yields fuel-efficient solutions quickly, without requiring full NLP convergence, and at short timescales its performance scales with the number of agents. Theoretical convergence guarantees are established, and the method is validated through extensive Monte Carlo simulation, including closed-loop recovery from in-flight faults. These properties make the framework well suited to spacecraft swarm applications.

0.14

Hierarchical Nonlinear Control for Swarm Encirclement Around a Moving Target UAV

eess.SY ·2026-11-09 ·Filipe S. Cavalheiro, Bruno J. Guerreiro
published similarity 0.57
Abstract · Pre-print. Accepted at the 17th APCA International Conference on Automatic Control and Soft Computing (CONTROLO 2026); 6 pages, 6 figures

This paper presents a hierarchical inner-outer loop nonlinear control strategy using a geometric Lyapunov-based framework for the cooperative encirclement of a target by multi-ple unmanned aerial vehicles (UAVs) in three-dimensional space. The encirclement problem is formulated on a two-sphere with arbitrary radius and center, denoted Gamma-2, by projecting agent positions from R3 onto a spherical manifold centered at the target, being the unit two-sphere at the origin S2 used for intermediate calculations. Desired encirclement configurations are generated via a point separation method on Gamma-2, while stable convergence from R3 to these points is guaranteed using a Lyapunov-based reduced-attitude control law inspired by geometric control on the two-sphere. Formal stability results are derived using Lyapunov analysis and the framework is validated in simulation using a nonlinear quadrotor model and controller. Results demonstrate stable encirclement and highlight the suitability of the proposed approach for three-dimensional multi-agent aerial systems.

0.32

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

cs.RO eess.SYmath.OC ·2026-11-01 ·Hamza Tariq, Adeel Akhtar
code/data similarity 0.57
Abstract · 8 pages, 3 Figures

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

0.22

FF-MPCC: High-speed Agile Formation Flight with Model Predictive Contouring Control

cs.RO ·2026-08-21 ·Aditya Dandwate, Vit Kratky, Parakh M. Gupta, Martin Saska, Robert Penicka
similarity 0.57
Abstract

Flying in a prescribed formation in an agile manner remains a challenging problem in the field of UAVs, particularly when following highly-demanding trajectories that require flight at platform limits. We address this problem by proposing a novel decentralized approach to formation flight along a given path that integrates formation maintenance into the MPCC framework, allowing UAVs to adapt their progression along complex paths while respecting individual dynamic constraints and maintaining the desired formation. To this end, we introduce a novel reparametrization and synchronization method for dynamic formation geometries together with a decentralized approach to determine the desired positions for the individual UAVs. The proposed approach allows the formation to coordinate high-speed path following without compromising formation integrity. The proposed approach is validated through extensive simulation and real-world experiments involving scenarios with varying complexity of paths and changes of required formation shape on the fly. In comparison to time-parameterized trajectory tracking, we demonstrate improved formation maintenance by 65% in high-speed flight with velocities up to 21 m/s, while achieving comparable times required to reach the goal.

0.16

An Optimal Algorithm for Changing from Longitudinal to Latitudinal Formation of Autonomous Aircraft Squadrons

cs.RO ·2026-10-13 ·Paulo André Sperandio Giacomin, Elder Moreira Hemerly
published similarity 0.57
Abstract · Brazilian Conference on Dynamics, Control and Applications (DINCON 2013); the scientific content remains unchanged

This work presents an algorithm for changing from longitudinal to latitudinal formation of autonomous aircraft squadrons. The maneuvers are defined dynamically by using a predefined set of 3D basic maneuvers. This formation change is necessary when the squadron has to perform tasks demanding both formations, such as landing, lift-off, obstacle avoidance and georeferencing. The time complexity analysis of the transformation algorithm reveals that its efficiency is optimal. Simulations show that the formation change is done without collision, and the proof of correctness ensures its latitudinal formation features.

0.31

Optimization of Fault-Tolerant Thruster Configurations for Satellite Control

eess.SY ·2026-08-19 ·Yasuhiro Yoshimura, Hirohisa Kojima
publishedunusualhighly cited similarity 0.56
Abstract · Accepted for publication in Advances in Space Research

The fault tolerance of spacecraft actuators significantly affects the reliability of satellites and the likelihood of successful missions. To enhance the fault tolerance of the actuators, this study derives optimal fault-tolerant configurations of fixed thrusters that maximize the controllability of a fully-actuated or underactuated satellite. The proposed method optimizes thrust and torque directions generated by the thrusters. Thus a cost function in terms of the thruster locations and directions is defined as the summation of the generated control forces and torques with respect to the body-fixed frame. The optimal configuration is obtained by the successive use of an energy potential method that is motivated by Thomson's problem. Some numerical examples are provided that show the effectiveness of the proposed formulation and optimization method.

0.68