CS Paper Radar

Hierarchical Nonlinear Control for Swarm Encirclement Around a Moving Target UAV

Filipe S. Cavalheiro, Bruno J. Guerreiro

eess.SY ·submitted 2026-11-09 16:47 UTC · v1
published

Abstract

This paper presents a hierarchical inner-outer loop nonlinear control strategy using a geometric Lyapunov-based framework for the cooperative encirclement of a target by multi-ple unmanned aerial vehicles (UAVs) in three-dimensional space. The encirclement problem is formulated on a two-sphere with arbitrary radius and center, denoted Gamma-2, by projecting agent positions from R3 onto a spherical manifold centered at the target, being the unit two-sphere at the origin S2 used for intermediate calculations. Desired encirclement configurations are generated via a point separation method on Gamma-2, while stable convergence from R3 to these points is guaranteed using a Lyapunov-based reduced-attitude control law inspired by geometric control on the two-sphere. Formal stability results are derived using Lyapunov analysis and the framework is validated in simulation using a nonlinear quadrotor model and controller. Results demonstrate stable encirclement and highlight the suitability of the proposed approach for three-dimensional multi-agent aerial systems.

Comment
Pre-print. Accepted at the 17th APCA International Conference on Automatic Control and Soft Computing (CONTROLO 2026); 6 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Swarm Choreography Made Simple: Superposed Guiding Vector Fields for Rigid Formation Path Following

cs.RO ·2026-11-02 ·Jo{ã}o Machado, Matthieu Verdoucq, Christophe Jouffrais, Murat Bronz
published similarity 0.63
Abstract

This paper presents a decentralized guiding vector field framework for rigid formation path following in multi- UAV systems based on the superposition of simple rule-driven vector fields. Each control objective is encoded as a dedicated vector-field component: a normalized tangential term to ensure progression along a prescribed geometric path at a desired speed, a convergence term driving the formation toward the path, a local coordination term that preserves the desired formation shape through a pseudo-path parameter, and a local separation term for inter-agent collision avoidance. The coordination mechanism requires the exchange of only a single scalar per agent, resulting in low communication bandwidth. Partial theoretical results establish convergence of the swarm to the desired path and formation in the absence of the sepa- ration term, while collision avoidance is formally guaranteed. The approach is experimentally validated using a swarm of five quadrotors executing two 3D choreographies. The first experiment involves tracking a helical path while maintaining a rigid V-shaped formation. The second demonstrates a spiral- like motion obtained by a rotating circular formation tracking a vertical line. The experimental results support the effectiveness and practical applicability of the proposed framework.

0.68

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.61
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.61
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22

Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor under Rotor Failure with Provable Safety Guarantees

eess.SY math.DSmath.OC ·2026-09-20 ·Mohamed Al Lawati, Adeel Akhtar
publishedcode/datahot direction similarity 0.58
Abstract · 7 pages, 3 figures (14 panels). Accepted for presentation at the 2026 IEEE Conference on Control Technology and Applications (CCTA)

This paper presents a nonlinear control law for a quadrotor unmanned aerial vehicle (UAV) under single-rotor failure that guarantees set stabilization via quasi-static feedback (QSF). Given a geometric curve in three-dimensional space, we characterize and stabilize the zero-dynamics manifold, also known as the path-following manifold, which represents all feasible motions along the path. Stabilizing this manifold ensures path-invariance: a UAV with a failed rotor initialized on the path with an appropriate orientation remains on the path for all future time. Furthermore, local exponential convergence to the manifold is guaranteed under certain conditions, implying that, under the stated assumptions, rotor failure during flight does not cause transverse deviation from the path. The proposed controller thus provides theoretical safety guarantees, which are validated through numerical experiments in the Drake physics-based simulation engine. The code is publicly available at https://gradslab.github.io/quasistatic-ftc/.

0.56

Suboptimal Formation Reconfiguration of Satellites Under Input Directional Constraints

eess.SY ·2026-08-19 ·Yasuhiro Yoshimura
published similarity 0.57
Abstract · Accepted for publication in Advances in Space Research

Proximity operations of satellites such as formation flying and on-orbit servicing offer more advanced missions than missions achieved by a single satellite. In a practical situation of formation flying, thrust directions for keeping and controlling a relative orbit is limited, e.g., for astronomical observation and plume impingement avoidance. The aim of this paper is to provide an energy efficient control method for a formation reconfiguration under input directional constraints with respect to both an inertial and a leader-fixed frames. The proposed controller is designed consisting of two parts: 1) guaranteeing a formation reconfiguration to a desirable formation on the basis of an energy optimal controller and 2) satisfying the input directional constraints by superimposing additional inputs. The analytical form of the control input shows that the input direction forms an ellipse in the leader-fixed frame when a particular boundary condition is satisfied, which is exploited as a nominal controller to take into account the input directional constraints. Due to the singular avoidance of the nominal controller, the additional inputs can be analytically obtained. The effect on the follower trajectory due to the additional inputs is compensated by setting a virtual target orbit, and thus the successful formation reconfiguration is still guaranteed. Some numerical simulation results verify the effectiveness of the proposed method and compare the energy efficiency.

0.69

Quadrotor Guidance for Tasks along Elliptical Boundary

eess.SY ·2026-10-23 ·Ravi Khandelwal, Ashwini Ratnoo
similarity 0.56
Abstract

This paper presents a guidance method that enables a quadrotor uncrewed aerial vehicle to perform inspection tasks along an elliptical boundary enclosing a structure of interest. The proposed guidance approach leverages a bifurcation theory-based framework that supports multiple inspection tasks, including convergence to a desired viewpoint, switching between viewpoints along the boundary, constant-speed elliptical circumnavigation, and circumnavigation with sectorial dwell-time constraint. Stability analysis of the proposed guidance dynamics establishes convergence of the generated reference trajectories to the desired behavior. The control parameters in the proposed method further allow the settling time of the reference trajectory to be specified for each task. The resulting reference velocity expressions are closed-form and algebraically simple, facilitating practical implementation. A qualitative comparison with existing guidance methods highlights the flexibility of the proposed approach in achieving different inspection tasks through a unified framework, while relying on simpler guidance computations. The proposed guidance method is validated through numerical simulations using a six-degree-of-freedom quadrotor model with model uncertainties, and a cascaded sliding-mode controller that tracks the generated reference trajectories under bounded disturbances.

0.24

Vector Field Following for Quadrotors via Reduced Attitude Representations with Applications to Safety-Critical Control

eess.SY ·2026-10-05 ·Mohammad Mirtaba, Max H. Cohen
similarity 0.55
Abstract

Vector field tracking for quadrotors provides a systematic framework for specifying complex behaviors at the translational level and transferring them to the full vehicle dynamics. Objectives such as safety, for example, can be encoded into a low-dimensional vector field, which is then embedded into the full dynamics through appropriate tracking conditions. The development of such tracking controllers for quadrotors can be facilitated by the fact that their translational dynamics depend only on the thrust direction and are independent of the vehicle's heading. Thus, reduced-attitude representations, leveraging the geometry of the unit sphere, provide a natural framework for vector field tracking on quadrotors. In this work, we propose two vector field tracking controllers for quadrotors using reduced-attitude representations based on dynamic extension and geometric control, respectively. Next, we illustrate how safety can be encoded into the desired vector field using control barrier functions and enforced for the full system. The effectiveness of the proposed approaches is demonstrated via simulations and experimental flight tests.

0.15

Nonlinear Control of Aerial Manipulator

eess.SY cs.RO ·2026-10-25 ·Sandesh Thapa
similarity 0.55
Abstract · 5 pages, 9 figures, 2 tables

This paper presents two controllers for a quadrotor equipped with a two-DOF robot manipulator that physically interacts with the environment. Cartesian impedance and adaptive sliding mode controllers are implemented and compared for a simple hovering task in the presence of some bounded disturbance. A full dynamic model is developed, and the two above controllers are implemented with the same initial conditions and desired position.

0.27