CS Paper Radar

Optimization of Fault-Tolerant Thruster Configurations for Satellite Control

Yasuhiro Yoshimura, Hirohisa Kojima

eess.SY ·submitted 2026-08-19 13:15 UTC · v1
publishedunusualhighly cited

Abstract

The fault tolerance of spacecraft actuators significantly affects the reliability of satellites and the likelihood of successful missions. To enhance the fault tolerance of the actuators, this study derives optimal fault-tolerant configurations of fixed thrusters that maximize the controllability of a fully-actuated or underactuated satellite. The proposed method optimizes thrust and torque directions generated by the thrusters. Thus a cost function in terms of the thruster locations and directions is defined as the summation of the generated control forces and torques with respect to the body-fixed frame. The optimal configuration is obtained by the successive use of an energy potential method that is motivated by Thomson's problem. Some numerical examples are provided that show the effectiveness of the proposed formulation and optimization method.

Comment
Accepted for publication in Advances in Space Research

Closest papers

Nearest neighbours by meaning across the whole index.

Suboptimal Formation Reconfiguration of Satellites Under Input Directional Constraints

eess.SY ·2026-08-19 ·Yasuhiro Yoshimura
published similarity 0.56
Abstract · Accepted for publication in Advances in Space Research

Proximity operations of satellites such as formation flying and on-orbit servicing offer more advanced missions than missions achieved by a single satellite. In a practical situation of formation flying, thrust directions for keeping and controlling a relative orbit is limited, e.g., for astronomical observation and plume impingement avoidance. The aim of this paper is to provide an energy efficient control method for a formation reconfiguration under input directional constraints with respect to both an inertial and a leader-fixed frames. The proposed controller is designed consisting of two parts: 1) guaranteeing a formation reconfiguration to a desirable formation on the basis of an energy optimal controller and 2) satisfying the input directional constraints by superimposing additional inputs. The analytical form of the control input shows that the input direction forms an ellipse in the leader-fixed frame when a particular boundary condition is satisfied, which is exploited as a nominal controller to take into account the input directional constraints. Due to the singular avoidance of the nominal controller, the additional inputs can be analytically obtained. The effect on the follower trajectory due to the additional inputs is compensated by setting a virtual target orbit, and thus the successful formation reconfiguration is still guaranteed. Some numerical simulation results verify the effectiveness of the proposed method and compare the energy efficiency.

0.69

Safe Position and Attitude Control for Landing on Small Celestial Bodies with Gravitational Uncertainty

eess.SY math.OC ·2026-10-03 ·Felipe Arenas-Uribe, T. Michael Seigler, Jesse B. Hoagg
theory similarity 0.55
Abstract

Landing on small celestial bodies is challenging because the spacecraft must satisfy safety and actuator constraints despite gravitational forces that are difficult to model accurately. This article presents an optimal control for safe landing with gravitational uncertainty and strict actuator limits. The approach addresses spacecraft pose control with attitude represented on SO(3), where there are actuator constraints and state constraints on position, attitude, velocity, and angular velocity. The approach combines several key techniques. First, the gravitational force uncertainty is estimated using an extended high-gain observer, and we present a new dynamic upper bound on the estimation error. This gravitational estimate and dynamic bound are then used to compute optimal control forces and torques that satisfy state and actuator constraints while tracking a landing trajectory. Optimal forces and torques are obtained from the closed-form solution to a quadratic program that has a single control barrier function constraint constructed by composing multiple control barrier functions that are designed to enforce each state and actuator constraint. Finally, an optimal allocation maps control forces and torques to actuator commands that satisfy actuator constraints. The method is demonstrated in simulation using 2 vehicle configurations with severe gravitational uncertainty.

0.21

Explicit Globally Asymptotically Stable Attitude Control with Reaction Wheel Angular Momentum and Torque Constraints

eess.SY math.OC ·2026-10-26 ·Javier Urrios, Rafael Vazquez, Guillermo Pacheco-Ramos
similarity 0.51
Abstract · Preprint accepted in CDC 2026 for presentation

We present an explicit Lyapunov attitude controller for rigid spacecraft actuated by three orthogonally mounted reaction wheels, parameterized using Modified Rodrigues Parameters (MRPs), which enforces hard bounds on wheel angular momentum and applied torque at every instant without solving any online optimization. A barrier-inspired momentum feedback prevents wheel saturation; a continuous positive scalar uniformly scales the feedback whenever a torque limit would otherwise be breached, preserving Lyapunov convergence. For the regulation problem, global asymptotic stability (GAS) is established via LaSalle's invariance principle, and constraint satisfaction is proved analytically for arbitrary symmetric positive-definite inertia matrices. Replacing the barrier by an error-state counterpart extends the design to tracking, with asymptotic (though no longer global) stability and the same safety guarantees under explicit feasibility conditions on the reference. Simulations confirm convergence and constraint satisfaction, and compare performance against other controllers.

0.30

Constraint-Unified MPC for Over-Actuated Surface Vehicles with Post-Detection Fault Reconfiguration

cs.RO eess.SY ·2026-09-17 ·Sebastian Burmester, Ruiheng Jiang, Noa Sendlhofer, Raffaello D'Andrea, Aswin Ramachandran
published similarity 0.51
Abstract · 15 pages, 10 figures. Accepted for the International Symposium of Robotics Research (ISRR) 2026

Choreographed aquatic performances require small autonomous surface vehicles to track precise paths under per-thruster force and rate limits, including after thruster failures. We report a deployed system in which trajectory tracking, thrust allocation, and the per-thruster force and rate limits are resolved in a single quadratic program over the per-thruster commands, with fault reconfiguration entering through one binary flag per thruster from an external detector. The system has driven a fleet in live performances on Lake Zürich and at the Time Space Existence 2025 exhibition in Venice. The field campaign measures 1.6 cm root mean square position error in a 10-minute hold and 4.3 cm over a 10 m square at 0.6 m/s. At 0.5 m/s, losing the front thruster increases the error to 11.6 cm, while losing the starboard-side thruster increases it to 11.5 cm. Losing two thrusters simultaneously leaves the craft tracking a 0.4 m/s square with a root mean square position error of 1.25 m. Compared to our own cascaded baseline, the unified formulation tracks the nominal square to the same few centimeters and holds station more tightly with roughly half the thruster force. The architectures separate after a thruster failure, where the unified controller stays within 24 cm of the reference path while the cascade leaves it.

0.27

Robust Mode Transition for Spacecraft Attitude Control

eess.SY ·2026-09-22 ·Emily Burgin, Carl-Johann Winkler, Felix Biertümpfel, Harald Pfifer, Pedro Simplicio
highly cited similarity 0.49
Abstract

This paper proposes the design of a single linear parameter-varying (LPV) controller for the combined control and smooth transition between two modes in a spacecraft mission. Current industry practice for transitioning between different controller modes is to use a discrete switching approach. When predefined criteria are satisfied, the controller of one mode is turned off and the controller of the other is initialised, resulting in an undesirable transient behaviour. In addition, each controller must individually undergo a rigorous verification and validation (V&V) process. A single controller synthesised using LPV methods streamlines the V&V process and improves the transient behaviour. The proposed design follows a mixed-sensitivity control scheme with LPV weights that are derived from the performance and robustness requirements of the individual modes. The controller is synthesised by minimising the induced $\mathcal{L}_2$-norm of the closed-loop interconnections between the controller and weighted plant. The performance and robustness of the controller is demonstrated on an acquisition and pointing task of a flexible satellite through a Monte-Carlo campaign.

0.47

Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure

eess.SY ·2026-11-11 ·Mohamed Al Lawati, Adeel Akhtar
code/data similarity 0.49
Abstract · 8 pages, 8 figures

This paper presents a nonlinear control law for a slung payload system (SPS) consisting of a quadrotor unmanned aerial vehicle (UAV) carrying a slung payload. We propose a fault-tolerant control (FTC) design for the case of a complete single-rotor failure, i.e., only three functioning propellers. The failure is not modeled as a disturbance to be handled by estimation. Rather, we model the faulty SPS in control-affine form and design a quasi-static feedback law directly for the faulty dynamics. The controller achieves local exponential convergence of the payload position to a geometric path in space, rather than tracking a timed reference trajectory. Moreover, the transverse dynamics are exponentially stable, and the path-following manifold is rendered controlled invariant by feedback. Controlled invariance allows motion along the path to be prescribed independently through a tangential command while the state stays on the path-following manifold. The UAV body angular velocity remains bounded under bounded applied torque despite the failure. To validate the control design, numerical simulations apply the controller derived from the faulty SPS model in coordinates to the coordinate-free SPS model. Code and animations are available at https://gradslab.github.io/qs-sl/.

0.17

Control of Decommissioned Satellites and Space Debris Using CubeSats with Ion Electrospray Engines

eess.SY ·2026-08-31 ·Felix Biertümpfel, Peter Seiler, Paulo Lozano, Harald Pfifer
published similarity 0.48
Abstract · Accepted manuscript to AIAA SciTech 2026

The emergence of the New Space era has led to a rapidly increasing number of satellites in Low Earth Orbit (LEO). Consequently, more stringent deorbiting requirements have recently been imposed to avoid the Kessler syndrome in LEO. This has resulted in the proposal of new concepts for space debris removal, including attaching CubeSats to space debris as a promising mitigation strategy. The initial phase of this strategy involves stabilizing and controlling the debris' attitude. This paper proposes an attitude control design for decommissioned satellites using attached CubeSats with staged ion electrospray engines (iESE). The compact design of iESE combined with staging provides increased reliability and mission durations. The large uncertainty in the dynamics of the combined system, i.e. satellite and attached CubeSats, poses a significant challenge to the control design. The approach taken here uses the robust control framework, specifically $μ$-synthesis, to tackle this challenge. The feasibility of the approach is demonstrated on a decommissioned satellite with multiple flexile appendages.

0.35

Decentralized Bi-Level Optimization for Cooperative Orbital Transportation of a Rigid Payload

eess.SY cs.MAcs.RO ·2026-10-22 ·Sidhdharth D. Sikka, Revathy Ravuri, Hei Yin Jowett Chan, Tim Echtermeyer, Shaoshuai Mou
similarity 0.48
Abstract · 10 pages, 6 figures, 4 tables

The rapid growth of the space economy, alongside increasing orbital congestion and debris, is driving demand for reliable on-orbit transportation of large and non-cooperative objects. Performing such transportation with a swarm of small spacecraft distributes risk and removes the single point of failure inherent to monolithic architectures, but requires solving a non-convex trajectory optimization coupling every agent's cone-constrained thrust to the payload's rotational dynamics. Existing approaches span decentralized control laws with asymptotic guarantees but limited constraint enforcement, and centralized and partially centralized planners that reintroduce a single point of failure. In this work, we present a decentralized bi-level framework driven by exact gradients: the problem is split into an inner convex thrust allocation and an outer search over payload torque trajectories. This decomposition yields fuel-efficient solutions quickly, without requiring full NLP convergence, and at short timescales its performance scales with the number of agents. Theoretical convergence guarantees are established, and the method is validated through extensive Monte Carlo simulation, including closed-loop recovery from in-flight faults. These properties make the framework well suited to spacecraft swarm applications.

0.14